SHAKER.jpg
2048 hits | | Posted: 6/29/03
shaker assembly purchased from Rare SPares, Australia

engine5.jpg
1863 hits | 41.12 KB | Posted: 6/29/03
front view of engine. You can see the off-set from center, and the bottom lip of the cowl at the rea...

engine3.jpg
1641 hits | 42.9 KB | Posted: 6/29/03
driver's-side view of engine. The carb is set way back under the cowl, angled back, and 2" off-cente...

shkrscoop9.jpg
1678 hits | 39.58 KB | Posted: 6/29/03
Shaker base mounted to OEM Holley carb. Had to cut about 2" off rear edge of top ring to clear firew...

shkrscoop10.jpg
1616 hits | 37.18 KB | Posted: 6/29/03
The problem mounting the scoop to the base! I plan to mount the scoop to a flat top plate that bolts...

engine7a.jpg
1182 hits | 64.43 KB | Posted: 4/18/06
early design of airbox, using radiator shroud cut up into sections

engine9a.jpg
1236 hits | 59.75 KB | Posted: 4/18/06
early design of airbox with diagram

engine13.jpg
1177 hits | 38.28 KB | Posted: 4/18/06
airbox design - scrapped due to large size

engine23.jpg
1220 hits | 43.97 KB | Posted: 4/18/06
another early design using the airfilter box from my 88 EFI Bronco.

shkrscoop12.jpg
1582 hits | 39.8 KB | Posted: 6/29/03
Modified midplate. For now, I'll call it an "adapter". This is just a crude design to get the proper...

shkrscoop16.jpg
1605 hits | 29.97 KB | Posted: 6/29/03
Scoop mounted to top plate, mounted to adapter

thwbronco21.jpg
1570 hits | 33.43 KB | Posted: 7/22/03
modified mid-plate, front-support bracket.

thwbronco17.jpg
1803 hits | 30.33 KB | Posted: 7/22/03
scoop and top plate mounted to flat metal pan that is bolted to the air box, with a cutout for airfl...

thwbronco23.jpg
1525 hits | 31.13 KB | Posted: 7/22/03
Front-support bracket is bolted to accessory/AC bracket at front of engine

shkrhood1.jpg
1580 hits | 24.19 KB | Posted: 7/1/03
shaker hood, top view, Ford medium blue metallic, center is Ford indigo blue metallic, both are uret...

shkrhood4.jpg
1717 hits | 54.73 KB | Posted: 7/1/03
shaker hood, underside view, braces were cut back 2" from opening for fitment of rubber seal on shak...

thwbronco14.jpg
2725 hits | 31.72 KB | Posted: 7/22/03
hood closed, scoop installed. Project finished!