3.JPG
753 hits | 80.39 KB | Posted: 8/23/11

Door panel and access panel removed. You see its already punched for the regulator and has the stops...
4.JPG
767 hits | 68.57 KB | Posted: 8/23/11

Four bolts need to be removed to remove window frame. 2 on each end of the door. The glass will come...
5.JPG
974 hits | 100.97 KB | Posted: 8/23/11

The window and frame removed as one. The window track is bolted to the frame
6.JPG
818 hits | 102.69 KB | Posted: 8/23/11

The window track will need to be unbolted from the frame. Probably drilled as it has 40 years of rus...
2.JPG
734 hits | 101.46 KB | Posted: 8/23/11

If you were lucky enough to get the window roller track from the donor car you ready to swap parts a...
7.JPG
938 hits | 102.71 KB | Posted: 8/23/11

Track with new roller track welded on. Make sure you hold it short on the ends, enough for the rolle...
1.JPG
868 hits | 93.99 KB | Posted: 8/23/11

1 miller and 1 superior regulator, yes they used the same parts
8.JPG
793 hits | 100.75 KB | Posted: 8/23/11

You can use any generic GM door handles from the 60's on up from a chevette to a van (left). I came ...
9.JPG
824 hits | 111.52 KB | Posted: 8/23/11

Panels and handles installed. Now dont expect the window to roll all the way down. Alittle less than...

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog