Before_with_finger_-_7pm.JPG
1232 hits | 34 KB | Posted: 6/30/03
Before project pic...driver's side

Before_front_side.JPG
867 hits | 81.14 KB | Posted: 6/30/03

Driver_before_-_34in.JPG
792 hits | 30.11 KB | Posted: 6/30/03
Stock height

New_spring_with_cast_blast.JPG
870 hits | 39.37 KB | Posted: 6/30/03
The new spring after being wire-brushed with a coat of "Cast-Blast" followed with 2 coats of gloss b...

Driver_stock_-_no_tire.JPG
703 hits | 52.64 KB | Posted: 6/30/03
Stock driver's side w/tire removed.

The spring hook at the top of the spring is a 13mm (if memory...

new_v._old_spring.JPG
797 hits | 24.41 KB | Posted: 6/30/03
About 8:30pm this is the old spring (right) compared to the new spring (left). They were the exact ...

11pm_completed_driver.JPG
1031 hits | 13.44 KB | Posted: 6/30/03
After a fierce downpour and a rush to finish this side before sleeping...here is the picture taken j...

Complete_driver_-_next_day.JPG
1033 hits | 33.54 KB | Posted: 6/30/03
Completed driver's side the following morning about 11am. After starting on the other side.

Pass_with_all_removed.JPG
1120 hits | 47.67 KB | Posted: 6/30/03
Passenger side after removing the tire.

Pass_prepped_with_shock.JPG
1130 hits | 46.65 KB | Posted: 6/30/03
New shock w/stock 18mm nut and bolt on the bottom and 9/16" nut on top. Just a note, do not do as I ...

complete_pass_-_no_weight.JPG
1277 hits | 47.07 KB | Posted: 6/30/03
Yep...self explanitory.

Pass_complete_with_wheel.JPG
1301 hits | 31.36 KB | Posted: 6/30/03
Completed view of passenger side.

After_Pass.JPG
1178 hits | 39.34 KB | Posted: 6/30/03
Taken from the same position as the before picture. Totally finished.

Now, just a side note, it ...