clutch-rod.jpg
496 hits | 75.48 KB | Posted: 10/11/06
After the body lift i was forced a question. What to do with the mechanical clutch system.i was goin...

clutch-rod4.jpg
502 hits | 89.19 KB | Posted: 10/11/06
here is another angle. you can see the pivet end is junk.

clutch-rod2.jpg
473 hits | 72.91 KB | Posted: 10/11/06
The rod is almost 1/2 thick.

cluch-rod3.jpg
495 hits | 71.54 KB | Posted: 10/11/06
the leagth is 23" so i need one 3" longer to off set the body lift and i added 1/2 for the taller bo...

clutch rod5.jpg
618 hits | 87.42 KB | Posted: 11/3/06
The equlizer rod (Below the linkage) the rectangle hole rounds out and causes slop in the shifter an...

clutch12.jpg
603 hits | 84.96 KB | Posted: 10/11/06
I looked at the sprint car circuit and got a custom made rod and heim joints.

clutch11.jpg
599 hits | 82.49 KB | Posted: 10/11/06
Here is a closeup of how it was going to connect the equlizer. bar

clutch10.jpg
491 hits | 98.43 KB | Posted: 10/11/06
Here is all the rod parts and the bellcrank. i found the plastic bushings were broken and had to got...

clutch9.jpg
608 hits | 102.51 KB | Posted: 10/11/06
Here is the bell crank all rebuilt and ready to go back in the truck.

clutch8.jpg
527 hits | 92.51 KB | Posted: 10/11/06
Here is the bell crank end of the clutch rod.

clutch7.jpg
653 hits | 104.57 KB | Posted: 10/11/06
Here is the rod all painted and ready to reinstall.

clutch6.jpg
692 hits | 113.46 KB | Posted: 10/11/06
Here is the bell crank back in the bronco.

clutch5.jpg
535 hits | 104.33 KB | Posted: 10/11/06
Here is the connection to the throw out arm.

clutch4.jpg
590 hits | 108.86 KB | Posted: 10/11/06
here is a shot of the rod going up to the equlizer bar. it is here i found another issue. the hole t...

clutch3.jpg
525 hits | 89.98 KB | Posted: 10/11/06
Not the cleanest hole but it will work for now.

clutch.jpg
502 hits | 93.39 KB | Posted: 10/11/06
Here is the top end of the hole in the floor.

clutch2.jpg
589 hits | 63.43 KB | Posted: 10/11/06
Here is the connection to the equlizer bar. This setup works great.