DSC00545.JPG
791 hits | 55.31 KB | Posted: 8/10/07
Tired old resistor pack, only worked on high speed fan I have added a wire to replace a broken conne...

DSC00548.JPG
438 hits | 54.02 KB | Posted: 8/11/07
You can see the lower connector tap broke off. The resulting short/open from vibration caused the lo...

DSC00547.JPG
379 hits | 59.11 KB | Posted: 8/11/07
Shot of the Part Number

DSC00549.JPG
441 hits | 69.15 KB | Posted: 8/11/07
I drilled a 1/8in hole through the socket and added a wire. I soldered the wire to a piece of solid ...

DSC00546.JPG
540 hits | 48.23 KB | Posted: 8/11/07
I found the thermal fuse was blown too. Thats the gold looking cylinder with the pointed end. You ca...

DSC00550.JPG
539 hits | 50.5 KB | Posted: 8/11/07
I picked this up at Ratshack,(under $2.00) I did not know what the rating on the original part was s...

DSC00551.JPG
510 hits | 57.15 KB | Posted: 8/11/07
There was an un used crimp location next to the original part, I clip the old part off, stuck in the...

DSC00552.JPG
384 hits | 64.35 KB | Posted: 8/11/07
After crimping in one end of the thermal fuse I soldered in the other. Keep as much of the length as...

DSC00553.JPG
405 hits | 60.86 KB | Posted: 8/11/07
I scuffed up the spot in-between the holes on the support, made a hook in the end of the lead and so...

DSC00555.JPG
937 hits | 60.43 KB | Posted: 8/11/07
The plug was toasted so I cut it off and used push on quick connects. Plugged it all in and tested ....

DSC00557.JPG
568 hits | 71.51 KB | Posted: 8/11/07
I secured every thing with ty-wraps and had a beer............or two.

If you don't feel comfortab...