kimg0153.jpg 427 hits | 66.59 KB | Posted: 9/4/16 the very late years 351w have a factory oil cooler setup. it has an adapter that goes between the en...
KIMG0035.jpg 362 hits | 51.41 KB | Posted: 9/4/16 i have a air cooled oil cooler. it has 1/2 inch NPT threaded connections which i have pointed to the...
KIMG0036.jpg 289 hits | 60.64 KB | Posted: 9/4/16 i had alot of conflicting ideas where to relocate the oil filter to. i wanted the filter to be easy ...
KIMG0037.jpg 363 hits | 41.95 KB | Posted: 9/4/16 bottom frontal view of the mount
KIMG0038.jpg 421 hits | 55.41 KB | Posted: 9/4/16 top view of mount with the radiator and fan shroud mocked into place. there should be plenty of room...
KIMG0039.jpg 454 hits | 59.38 KB | Posted: 9/4/16 side view. the filter is only slightly exposed from the bottom of the frame. it should be well prote...
KIMG0041.jpg 288 hits | 68.16 KB | Posted: 9/10/16 the filter relocation kit comes with 2 short 36" hoses which i cant use and i dont trust very m...
KIMG0042.jpg 336 hits | 58.64 KB | Posted: 9/10/16 i have the 2 hoses installed on the engine side adapter. both ends of the hoses are the fixed non-sw...
KIMG0043.jpg 309 hits | 69.91 KB | Posted: 9/10/16 i have the hoses ran over the top of the 4WABS pump between it and the wheel-well. i have the hose f...
KIMG0045.jpg 296 hits | 55.77 KB | Posted: 9/10/16 i have an finned oil cooler installed in front of the condenser behind the grill in a nice open spot...
KIMG0046.jpg 265 hits | 56.59 KB | Posted: 9/10/16 this is passenger side cutout of the core support where the hoses from the cooler and the engine are...
KIMG0047.jpg 294 hits | 60.81 KB | Posted: 9/10/16 the hoses are running through the passenger side core support cutout and meeting at the filter. tho ...
KIMG0050.jpg 328 hits | 54.68 KB | Posted: 9/10/16 how it looks form the front. im gonig to paint the brackets for the cooler so it wont be seen easill...
Oil filter relocation and cooler
