Keypad16a.jpg
0 hits | 94.9 KB | Posted: 4/3/25
In preparation to add a factory-type keyless entry pad to the driver's door, I added 4 pins to BCM C2280E for the driver's door keypad. Pin 2 is purple (keypad B); pin 15 is yellow (keypad C); pin 28 is gray (keypad A); pin 35 is white (keypad illumi...

Keypad16b.jpg
0 hits | 84.1 KB | Posted: 4/3/25
In preparation to add a factory-type keyless entry pad to the driver's door, I looked up its wiring. It looks like DB5Z7820, DB5Z7820555AA, DB5Z7820555AC, & BB5Z7820555AA and their aftermarket copies wi...

Xbars.jpg
0 hits | 89.01 KB | Posted: 3/19/25
This cheap copy set of crossbars is for '11-15 Explorer roof racks. The poor instructions show the steel nuts inserted wrong, so I had to flip them. And the rear bar was too long, so I had to bandsaw it & re-drill a screw hole. But they look OK.

LEDsDrHdLHF.jpg
0 hits | 47.27 KB | Posted: 3/17/25
These common blue LEDs (5mm round 12V and 30cm flexible 12V) are soldered into the lock switch illumination on the front doors. There's a shaped hole in t...

LEDsDrHdLHR.jpg
0 hits | 53.08 KB | Posted: 3/17/25
In the rear door panels of a PIU, there are no pockets, so only the round LED was added to a new hole drilled in the handle well. Since there are no lock switches, these are soldered to the window switches (which have been re-activated).

LEDsDrHdLHF.jpg
0 hits | 47.27 KB | Posted: 3/17/25
These common blue LEDs ( and [url=https://www.amazon.com/dp/B09JBS3D12]30cm flexible 12V) are soldered into the lock switch illumination on the front doors. There's a shaped hole in the door handle for a factory LED, bu...

DashTray.jpg
0 hits | 77.42 KB | Posted: 3/17/25
I had no use for the dash tray, and I didn't like the look of the screw holes in it, so I got a speaker grill from the JY, removed the speaker, and modified the top edge of the center stack panel. Most people try to modify the speaker grill, but most...

GrillWrapped.jpg
0 hits | 96.31 KB | Posted: 3/17/25
These excellent speaker grills are printed from Carbon-fiber-reinforced polycarbonate, but I don't like their open...

20250303_170343.jpg
0 hits | 125.71 KB | Posted: 3/16/25
The console now has enough wiring connected for the front seats to be installed. A [url=https://3dub200.com/collections/ford-explorer/products/11-19-ford-explorer-police-interceptor-utility-center-console-rear-temperature-control-delete-panel]custom ...

Before5.jpg
0 hits | 55.15 KB | Posted: 2/13/25
These first 5 pics were all I saw before bidding.

Before1.jpg
0 hits | 67.66 KB | Posted: 2/13/25
These first 5 pics were all I saw before bidding.

Before2.jpg
0 hits | 44.81 KB | Posted: 2/13/25
These first 5 pics were all I saw before bidding.

Before3.jpg
0 hits | 62.72 KB | Posted: 2/13/25
These first 5 pics were all I saw before bidding.

Before4.jpg
0 hits | 57.32 KB | Posted: 2/13/25
These first 5 pics were all I saw before bidding.

Bought1.jpg
0 hits | 121.87 KB | Posted: 2/13/25
This is how it looked when I picked it up in Nashville.

BodyF.jpg
0 hits | 146.33 KB | Posted: 2/13/25

BodyLHF.jpg
0 hits | 131.83 KB | Posted: 2/13/25

BodyLHR.jpg
0 hits | 128.15 KB | Posted: 2/13/25