IMG_0374.JPG
1162 hits | 68.43 KB | Posted: 3/28/05
Not a pretty sight as picked up from the junkyard. Lunched my axle last week and picked up this limi...

IMG_0378.JPG
1283 hits | 71.36 KB | Posted: 3/28/05
Up on stands and penetrating oil sprayed onto all nots and bolts that will be coming off. Seems the ...

IMG_0384.JPG
1071 hits | 59.72 KB | Posted: 3/28/05
Only thing I saved off this axle breathing port is the bolt itself, as I have a new brake hose/union...

IMG_0385.JPG
975 hits | 70.16 KB | Posted: 3/28/05
Sway bar and brackets off. Shocks off as well, just brake lines to get rid of now.

IMG_0388.JPG
1125 hits | 69.22 KB | Posted: 3/28/05
Scraped and ground down the axle of loose dirt and most rust.

IMG_0389.JPG
1164 hits | 61.62 KB | Posted: 3/28/05
There's my loctite rust neutralizer starting to turn purple from a cream colour. Soon it will be bla...

IMG_0394.JPG
2033 hits | 60.09 KB | Posted: 3/28/05
After pulling out the pin lock and sliding the pin out of the way, I just pushed the axle shaft in a...

IMG_0397.JPG
1097 hits | 69.01 KB | Posted: 3/28/05
Out comes that axle and off comes the brake backing plate.

IMG_0403.JPG
1154 hits | 59.69 KB | Posted: 3/28/05
First coat of Krylon gloss black.

IMG_0407.JPG
1150 hits | 60.38 KB | Posted: 3/28/05
Pinion seal on the left (in bag), two outer axle seals in boxes, crush sleeve and pin lock bolt (old...

IMG_0207.JPG
1078 hits | 65.21 KB | Posted: 3/29/05
Opened up my original axle and couldn't really see anything visually wrong. Yes there was a lot of p...

IMG_0222.JPG
1264 hits | 78.72 KB | Posted: 3/29/05
Went to undo the retaining pin bolt and it was busted off even before I put the ratchet on it ! My b...

IMG_0216.JPG
1334 hits | 65.17 KB | Posted: 3/29/05
The result wasn't pretty but it sure did the trick and allowed us to drift the pin out. Notice how t...

IMG_0223.JPG
1181 hits | 52.08 KB | Posted: 3/29/05
Only the cheapest in my Bronco ! Without this friction modfier additive we'll never know if the actu...

IMG_0002.JPG
1290 hits | 53.16 KB | Posted: 3/30/05
This little steel black wedge is a Bronco only item that helps get our pinion angle right. I'd been...