|
|
This is the zone map for the compass
To actually calibrate the compass:
Go find an abandoned parking lot and follow the following steps:
Press and hold the "MODE" button until you see "VAR" (takes around 5 seconds)
Release the "MODE" button. Push the "MODE" button until you have selected the zone you are currently in.
Release the "MODE" button and wait until the console is back at normal operation.
Press and hold the "MODE" button until you see "CAL" (takes around 9 seconds)
Release the "MODE" button.
Now the fun part. People will think you are crazy. Drive in a circle at around 3mph. Your console will be changing direction really fast. Continue to do this until the console is back at normal operation.
There are 8 different color wires coming out of the console:
Red/Blue
Dimmer switch:
Matches the brightness with the rest of the interior lights. I didn’t use this one, I always have mine turned all the way up anyway, but you can attach it to the wire coming off the head light switch, or the one for your stereo.
Blue/Yellow
Blue/White
Temp Sensor:
These wires are to be ran to wherever you mount the temperature sensor. Some mount it inside the car, some outside.
Black
Ground:
You can pretty much attach this anywhere on the body.
Green/Orange
Map light power, just hook it up to the constant power wire in the dome light.
Black/Blue
Dome light power, hook it up to the wire that turns on and off with the doors.
Grey/Black
Vehicle Speed Sensor:
This wire is to be spliced into the speed sensor of the car so the console can compensate for wind chill. I didn't attach this wire at all. I just mounted it out of the wind
Yellow/Grey
Power:
This is the main power that will go to the console.
|
