84 blue bronco.jpg
1390 hits | 42.59 KB | Posted: 11/25/07
My first Bronco 2, many years ago I never thought a vehicle would be that capable off-road, and I've...

2.9L V6 before and after.jpg
919 hits | 56 KB | Posted: 11/25/07
I really thought the lifter noise would stop since they were new and torqued to specs but they were ...

receiver cradle.JPG
652 hits | 86.06 KB | Posted: 11/25/07
later i got rid of the 6 bolts and welded it solid. so far it works great.

rolled blue2.JPG
618 hits | 116.14 KB | Posted: 11/25/07
Thats my friend Jimbo's K-5 blazer and a #4 parts truck we're dissasembling. My '77 vette in the ga...

DSCN0158.JPG
672 hits | 111.8 KB | Posted: 2/5/08
I cut out the inner body that was smashed from a wreck, and straightened the front end of the frame ...

DSCN0159.JPG
704 hits | 108.17 KB | Posted: 2/5/08
Now I wish I had narrowed the front end at this point but oh well, I didnt even think about it at th...

DSCN0922.JPG
1109 hits | 88.8 KB | Posted: 11/25/07
after i installed the roll bar

DSCN0920.JPG
1040 hits | 94.26 KB | Posted: 11/25/07
I made the lift gate a fold down tail gate. The roll bar is designed to have a soft top stretched ac...

DSCN1886.JPG
2137 hits | 99.28 KB | Posted: 1/14/08
I trimmed the front fenders after driving it off road. I used a 4 1/2 inch angle grinder with a cutt...

DSCN1887.JPG
752 hits | 102.08 KB | Posted: 1/14/08
I tried cutting as little as possible.

DSCN1888.JPG
633 hits | 102.83 KB | Posted: 1/14/08
I made a pattern from a piece of Tyvek house wrap, they match really well.

DSCN1889.JPG
663 hits | 95.65 KB | Posted: 1/14/08
haha , I will paint it soon I guess.

DSCN2026.JPG
644 hits | 76.48 KB | Posted: 2/12/08
Grant gt steering wheel, the original was baby blue, worn out, and stupid looking.

DSCN2027.JPG
727 hits | 94.69 KB | Posted: 2/12/08
got rid of the T-shifter handle, you can see my cb radio, a few switches for lights, and a nifty cli...

DSCN2035.JPG
840 hits | 97.18 KB | Posted: 2/12/08
Warn Tabor-9K winch in cradle, locked down w/key. High-lift jack mounted to rollbar X-brace, positio...

DSCN2137.JPG
1676 hits | 74.44 KB | Posted: 3/18/08
It had no hood release cable so I went this route.

PMXI3972.jpeg
98 hits | 44.75 KB | Posted: 11/6/17
Added bucket seats this summer and a set of 5-point belts.

IMG_2177.JPG
98 hits | 60.86 KB | Posted: 11/6/17
New fabbed bumper

IMG_2235.JPG
101 hits | 65.92 KB | Posted: 11/6/17
Threw some paint on it

IMG_2064.JPG
277 hits | 69.1 KB | Posted: 11/6/17
Moved the rear axle back 8 inches

IMG_2065.JPG
230 hits | 43.81 KB | Posted: 11/6/17
Leafs from an 04 durango

IMG_2066.JPG
276 hits | 54.79 KB | Posted: 11/6/17
Broke one of the B2 leafs at Disney