SuperMotors.net Forums
JOE TEPOSTE
 |
|
• YUMA, AZ, USA |
|
• Registered on 12/16/2003 |
|
• 7 posts |
• 1 Vehicle
|
|
 Posted:1/30/2005 21:09 |
|
|
Here's my issue I have a '93, the instrument panel witch that rolls the back window down will only roll down, all the other windows work fine, if I walk around and use the key on the rear door it goes both ways. Is it the fuse, or is their a relay I'm missing here. I'd appreciate any help. I need to post my bronc she looks sweet, all it took was a lift, some mickey's and a python now she rocks.  |
|
|
|
|
Posted:2/10/2005 12:43 |
|
|
This is probably way to late but i was playing around here and found this.
The first step is to pull the switch out. Check for dirty connectors or a wire that has come off the switch. There are six (IIRC) wires on the back of that switch.
If that doesn't work, grab yourself a multimeter and check continuity or short the wires to let the window motor get power. If it does, new switch time. |
|
JOE TEPOSTE
|
|
• YUMA, AZ, USA |
|
• Registered on 12/16/2003 |
|
• 7 posts |
• 1 Vehicle
|
|
|
Posted:3/29/2005 22:09 |
|
|
|
Ian, thanks I actually took the puppy out and took the thing apart, it worked for about a week and then went out again, so I'm guessing it's either the swith or a relay I'm missing. I can use the rear switch without a problem. Thanks I appreciate your help. |
|
|
|
