 Diag Dice.jpg
264 hits | 42.92 KB | Posted: 2/17/24
Buying these would be money better-spent than guessing - at least these provide some entertainment, ...
 FrameVIN96.jpg
1718 hits | 62.24 KB | Posted: 10/12/18
Rear frame Serial Number (last 8 digits of the VIN) on a '96 Bronco
There's another numeral & an ast...
 Hayneses.jpg
27595 hits | 24.52 KB | Posted: 10/28/06
This red one is a VERY old edition (#880), perfect for '80-86 trucks. It includes many older diagra...
 RS22-172DMM.jpg
5343 hits | 59.55 KB | Posted: 2/1/16
Radio Shack 22-172 (Model 2200172, UPC 040293278861) True-RMS Digital Multimeter with high-current A...
 AutelAL309.jpg
8338 hits | 61.99 KB | Posted: 6/18/09
Autel.us AutoLink AL309
[url=https://www.supermotors.net/registry/media/174488][img]https://www.sup...
 MDX-P300.jpg
5683 hits | 43.01 KB | Posted: 10/12/10
Midtronics high-frequency testers (with the LCD screen & 5 buttons down the right side) are the indu...
 Tape.JPG
4334 hits | 59.42 KB | Posted: 9/27/11
Polyken Wiring Harness Tape
[url=https://www.amazon....
 AmpWire.jpg
616 hits | 70.29 KB | Posted: 12/28/21
Amp Wire Routing for '80-96 Broncos & F-series (& '97 >8500GVWR)
IF THE IMAGE IS TOO SMALL, click it...
 HarnessBronco.jpg
2983 hits | 130.84 KB | Posted: 10/13/14
'93 Bronco XLT 5.8L E4OD Wiring Harness Sections
IF THE IMAGE IS TOO SMALL, click it.
The 8 missing...
 Harness93XLTdash.JPG
9258 hits | 111.16 KB | Posted: 2/12/12
Dash Harness from '93 Bronco XLT
IF THE IMAGE IS TOO SMALL, click it.
[url=http://www.supermotors.n...
 Harness96Dash..JPG
12137 hits | 77.8 KB | Posted: 8/8/07
STRIPPED Dash Harness from a '96 F150
IF THE IMAGE IS TOO SMALL, click it.
C216 is an unused carryo...
 Harness49Eng.JPG
3022 hits | 68.63 KB | Posted: 10/29/12
'95 4.9L Engine Harness
See also:
[url=https://www.fordparts.com/FileUploads/CMSFiles/18376%20Pigta...
 Harness93XLTbay.JPG
3743 hits | 87.78 KB | Posted: 2/12/12
Engine Bay Harness from '93 Bronco XLT
IF THE IMAGE IS TOO SMALL, click it.
I forgot to label the w...
 Harness93XLThvac.JPG
2716 hits | 101.77 KB | Posted: 2/12/12
HVAC Harness from '93 Bronco XLT
See also:
[url=https://www.supermotors.net/registry/media/1167220_...
 Harness93XLTalt.JPG
3943 hits | 105.64 KB | Posted: 2/12/12
Alternator Harness from '93 Bronco XLT (stock)
See also:
[url=https://www.fordparts.com/FileUploads...
 7Pin93.jpg
2041 hits | 147.79 KB | Posted: 9/1/14
7-Pin Trailer Connector on '93 EB Bronco
IF THE IMAGE IS TOO SMALL, click it.
Note that socket with...
 Harness94TG.JPG
2825 hits | 58.72 KB | Posted: 3/13/12
'94 Bronco tailgate wiring harness
See also:
[url=https://www.fordparts.com/FileUploads/CMSFiles/18...
 HarnessWear95B.jpg
436 hits | 75.75 KB | Posted: 8/3/22
Harness Wear on a '95 Bronco
IF THE IMAGE IS TOO SMALL, click it.
This truck began exhibiting inter...
 HarnessCut.jpg
574 hits | 41.04 KB | Posted: 2/9/21
Wiring Harness Repair
IF THE IMAGE IS TOO SMALL, click it.
Unless burned, it's almost always quicke...
 StarterV8auto.jpg
155 hits | 75.78 KB | Posted: 2/18/24
Smallblock V8 (5.0L & 5.8L) Starter for auto trans
IF THE IMAGE IS TOO SMALL, click it.
[url=htt...
 SolenoidCover.jpg
856 hits | 76.03 KB | Posted: 1/21/18
Starter Solenoid 12V Lug Cover
 StarterRelayTerminals.JPG
22000 hits | 64.27 KB | Posted: 7/4/10
My starter relay (E9TZ-11450-B). Functionally identical to the older style whose main lugs point to...
 AndersonConns.jpg
156 hits | 42.63 KB | Posted: 2/18/24
Anderson-style Connectors
IF THE IMAGE IS TOO SMALL, click it.
These are useful for jumper cable...
 Weatherproof.jpg
2197 hits | 72.03 KB | Posted: 9/20/16
Weatherproof Automotive Enclosures
They just AREN'T.
This is what you get with those pretty colore...
 GregWinch4.jpg
1068 hits | 99.26 KB | Posted: 1/23/18
Cheap Winch = Cheap Fairlead (and all other parts)
Although this roller fairlead LOOKS just like an...
 StarterRelayTypes.JPG
11932 hits | 50.7 KB | Posted: 7/3/10
Starter Relays
IF THE IMAGE IS TOO SMALL, click it.
The top 2 (late style) (E9TZ-11450-B) use paral...
 RelaySide.JPG
8023 hits | 72.41 KB | Posted: 5/26/11
Side-Terminal (Old-Style) Starter Relay (E9TZ-11450-B)
IF THE IMAGE IS TOO SMALL, click it.
The wor...
 StarterRelays.JPG
4033 hits | 78.93 KB | Posted: 3/10/12
Starter Relays
The old style (E9TZ-11450-B) is unreliable, even when new. The new style (E9TZ-1145...
 StarteRelayLate.JPG
12147 hits | 59.72 KB | Posted: 10/8/10
Starter Relay (E9TZ-11450-B) with parallel posts
IF THE IMAGE IS TOO SMALL, click it.
This design i...
 StarterRelay93conns.JPG
16370 hits | 64.93 KB | Posted: 10/8/10
Starter Relay (E9TZ-11450-B) Connections '92-96
IF THE IMAGE IS TOO SMALL, click it.
The relay trig...
 EngineBay93RHF.JPG
7080 hits | 60.53 KB | Posted: 10/8/10
'92-96 Engine Bay RHF
IF THE IMAGE IS TOO SMALL, click it.
The green ground stud is G101.
[url=htt...
 Battery.JPG
6601 hits | 82.75 KB | Posted: 7/17/03
This is the best battery for the money (now renamed TestedToughMAX). ~$140 (during sales) with an 8...
 BatTrays.jpg
1373 hits | 143.93 KB | Posted: 1/27/16
Both of these appear to have come from '93 trucks, but both are stamped F4TB748.
 BatTrayz.jpg
1295 hits | 51.21 KB | Posted: 1/29/16
More battery trays from the junkpile...
[url=https://www.supermotors.net/registry/media/828671][img...
 G103V8.jpg
4875 hits | 124.03 KB | Posted: 9/10/14
Engine Block Ground (G103) on a '93 5.8L Bronco
Looking up & rearward, lying in front of the RHF tir...
 BlockGrounds9358.jpg
3530 hits | 125.46 KB | Posted: 5/13/15
V8 Block Grounds
The one that will be used on this block is clean, down to shiny metal and lightly ...
 FrameGround49.JPG
4604 hits | 72.25 KB | Posted: 7/12/12
The I6 frame ground is on the R engine perch. Like the V8, it's a tab soldered to a bare spot on th...
 1GHD.JPG
4463 hits | 67.6 KB | Posted: 3/31/11
Heavy-Duty 1G alternator (100A) from '90 E150 5.0L
[url=http://www.supermotors.net/registry/media/8...
 92F2G.JPG
8398 hits | 68.25 KB | Posted: 12/9/11
2G Alternator on a '92 F150 5.0L
'93-up have a 3G alternator. All 2Gs are fire hazards, despite the...
 AltWiring2G-3G.JPG
9805 hits | 80.86 KB | Posted: 3/6/12
Alternator Wiring 2G vs. 3G Connectors
The only differences are that: 1) the 2G uses a [url=http://...
 3Gs.jpg
4550 hits | 111.86 KB | Posted: 2/15/16
3G Alternators are easily distinguishable by the vent holes between each pair of front ribs. 95A mo...
 Alt3G-V8.jpg
298 hits | 102.78 KB | Posted: 2/16/24
130A 3G Reman Motorcraft GL8779RM (Ford F07F10300AA)...
 3Groasted.jpg
1322 hits | 109.06 KB | Posted: 10/17/18
This is what happens when an alternator is run at max. output for too long. It can also happen simp...
 PulleyAlign.jpg
181 hits | 65.99 KB | Posted: 2/16/24
Pulley Alignment can be checked by simply sighting across the pulleys. In this case, the camera is a...
 SiliconeVacLines.jpg
3218 hits | 92.32 KB | Posted: 1/26/22
Silicone Vacuum Lines on an '89 5.0L with the '96-up [url=https://www.amazon.com/dp/B000NT9TRI]plast...
 VacuumMan.JPG
1726 hits | 82.29 KB | Posted: 1/9/15
Vacuum Manifold
 VacCkVlvT.JPG
1773 hits | 67.99 KB | Posted: 1/9/15
Vacuum Check Valves
 VacResDual87.JPG
2580 hits | 96.36 KB | Posted: 1/9/15
Plastic Dual-chamber Vacuum Reservoir on an '87 F350
[url=https://www.supermotors.net/registry/medi...
 CoffeeCanOpen.JPG
8960 hits | 59.23 KB | Posted: 7/6/12
The mysterious coffee can, finally revealed. Like most, this one has rusted along the rear seam unt...
 5.8L right.jpg
36490 hits | 82.3 KB | Posted: 10/2/04
V8 Engine Bay
IF THE IMAGE IS TOO SMALL, click it.
[url=https://www.supermotors.net/vehicles/regist...
 5.8L left.JPG
29398 hits | 123.96 KB | Posted: 7/10/03
V8 Vacuum lines (same as 5.0L)
[url=https://www.supermotors.net/vehicles/registry/media/894687][img...
 RFIcapS.jpg
792 hits | 49.16 KB | Posted: 8/3/22
RFI Capacitors
IF THE IMAGE IS TOO SMALL, click it.
Unlike the similar-looking condenser (capacitor...
 RFIcapF6UZ18832AA-10.jpg
995 hits | 63.18 KB | Posted: 10/15/20
RFI Capacitor F6UZ-18832-AA ~$8~11 at dealership
 5.8L throttle.JPG
12685 hits | 103 KB | Posted: 7/10/03
V8 Throttle Body Components
The CANP solenoid should have 30-38 Ohms resistance.
See also:
[url=h...
 5.8L idle.JPG
12959 hits | 86.21 KB | Posted: 7/10/03
V8 IAC & TPS
The stop screw is red-threadlocked because it should NEVER be adjusted. It does NOT c...
 PCVhosesV8rev.jpg
488 hits | 59.25 KB | Posted: 1/26/22
Revised PCV hoses for V8s
IF THE IMAGE IS TOO SMALL, click it.
[url=https://www.supermotors.net/reg...
 ThrCblSpacer.JPG
3063 hits | 61.62 KB | Posted: 7/12/12
An easy way to take up the slack in the throttle pedal cable is to sleeve it.
[url=https://www.supe...
 Screens.jpg
164 hits | 94.88 KB | Posted: 2/16/24
Screens
IF THE IMAGE IS TOO SMALL, click it.
Screening the intake keeps leaves, bugs, & other la...
 FanShroudClips.jpg
286 hits | 72.44 KB | Posted: 8/3/22
Fan Shroud Lower Clips
IF THE IMAGE IS TOO SMALL, click it.
 BumperSpacers92.jpg
1174 hits | 61.53 KB | Posted: 10/23/14
'92-97 front bumper spacers
 BumperF92-96Arms.jpg
174 hits | 44.3 KB | Posted: 2/17/24
'92-96/7 Front Bumper Arms & (Bronco-only) Brace Plates
IF THE IMAGE IS TOO SMALL, click it.
This p...
 BumperBrkts87-91.JPG
3832 hits | 55.7 KB | Posted: 1/8/09
Bumper Brackets for '87-91
Note frame horns are identical to '80-86, other than the holes for these...
 BumperF87-91.jpg
145 hits | 47.52 KB | Posted: 2/17/24
'87-91 Front Bumper Attachment
IF THE IMAGE IS TOO SMALL, click it.
[url=https://www.supermotors...
 RadHoseLwrV8noil.jpg
500 hits | 76.23 KB | Posted: 6/16/20
V8 Lower Radiator Hose w/o Oil Cooler F3TA8B237NA [url=https://www.amazon.com/dp/B001O4MU8G]Dayco 71...
 PanRMSleak.jpg
1180 hits | 74 KB | Posted: 7/11/20
Liquid leaks don't always originate where they drip from. Always follow the damp trail forward & up ...
 MisfireSensor.jpg
559 hits | 43.81 KB | Posted: 1/30/22
'96-only Misfire Sensor F6TZ6C365GE (chy-neez copy)
...
 PanGsktV8c.jpg
457 hits | 47.56 KB | Posted: 1/26/22
V8 Pan Gasket
IF THE IMAGE IS TOO SMALL, click it.
The quickest, easiest, and best way to change th...
 PanGsktV8a.jpg
446 hits | 36.56 KB | Posted: 1/26/22
V8 Pan Gasket
IF THE IMAGE IS TOO SMALL, click it.
The quickest, easiest, and best way to change th...
 DistCapGrease.jpg
2080 hits | 95.82 KB | Posted: 3/15/19
A distributor cap doesn't have to be replaced just because it has some miles. If the wear is minor,...
 DistOring.jpg
350 hits | 68.2 KB | Posted: 1/26/22
Distributor O-Ring
IF THE IMAGE IS TOO SMALL, click it.
This O-ring fits 4.9L, 5.0L, 5.8L, and p...
 DistStabV8.jpg
1617 hits | 81.85 KB | Posted: 6/2/18
Stabbing a V8 distributor
To get the rotor in the correct position, set the engine at #1 TDC (0°), ...
 TimingScale9549.jpg
205 hits | 44.51 KB | Posted: 3/4/24
4.9L Timing Scale
IF THE IMAGE IS TOO SMALL, click it.
[url=https://www.supermotors.net/registry...
 TimingSlackMeasure.jpg
675 hits | 67.42 KB | Posted: 1/26/22
Timing Chain Slack
IF THE IMAGE IS TOO SMALL, click it.
It's very easy & informative to check the s...
 OilPrime.jpg
199 hits | 85.97 KB | Posted: 2/16/24
Oil Pump Priming
IF THE IMAGE IS TOO SMALL, click it.
After a rebuild or storage, an engine shou...
 TimingV8.jpg
235 hits | 72 KB | Posted: 2/16/24
Ignition Timing Adjustment on a V8
IF THE IMAGE IS TOO SMALL, click it.
 EngHarnsCndtNuts96.jpg
184 hits | 70.95 KB | Posted: 2/16/24
Conduit Nuts
IF THE IMAGE IS TOO SMALL, click it.
With some effort, the V8 harness conduit nuts ...
 Dist-mount TFI-IV SPOUT.jpg
13265 hits | 42.61 KB | Posted: 10/1/05
DIstributor-mounted TFI-IV ICM module & SPOUT connector on '84-91 trucks. This is a V8, looking str...
 IgModSocket.JPG
4556 hits | 61.19 KB | Posted: 6/19/11
Ignition Module Socket
Special deep thin wall 7/32" (5.5mm) allows access to TFI-IV ICM mounti...
 PlugDiagnosis.jpg
780 hits | 121.67 KB | Posted: 1/29/22
Spark Plug Diagnosis (I can't remember where I found this, but I didn't create it)
IF THE IMAGE IS T...
 TimingClean.jpg
798 hits | 70.97 KB | Posted: 11/16/20
Wire-brushing the harmonic balancer makes the timing scale easier to find. Painting the balancer (ev...
 DistHoldDown.jpg
3303 hits | 64.38 KB | Posted: 1/25/18
Smallblock Distributor Clampdown Bolt 24-33 Nm; 17-25 lb-ft
See also:
[url=https://www.supermotor...
 5.8L SPOUT.jpg
11901 hits | 48.98 KB | Posted: 10/2/04
SPOUT, cruise servo, test connectors on '93 5.8L Bronco under the Left hood hinge.
See also:
[url=...
 EngineBay93LHR.JPG
10692 hits | 68.23 KB | Posted: 10/8/10
'93-95 Bronco Engine Bay LHR
IF THE IMAGE IS TOO SMALL, click it.
This cruise servo was only used f...
 Connectors93.JPG
10175 hits | 77.04 KB | Posted: 12/30/11
'93-95 Bronco Connectors under the L hood hinge
IF THE IMAGE IS TOO SMALL, click it.
'92 & all F-ser...
 EEC Install.JPG
12948 hits | 93.23 KB | Posted: 7/10/03
This is how I fit the '95 EEC into an '82 Bronco body tub. The black connector in the middle is the...
 Firewall82.jpg
440 hits | 53.5 KB | Posted: 1/26/22
Firewall of an '82 Bronco
IF THE IMAGE IS TOO SMALL, click it.
This firewall was modified for an...
 HeadlightSwBurned.jpg
134 hits | 176.17 KB | Posted: 2/18/24
Headlight Switch Terminal B2
IF THE IMAGE IS TOO SMALL, click it.
This is a known problem, but s...
 PCM Inside Text.JPG
8422 hits | 78.96 KB | Posted: 7/10/03
This is what my '83 kick looks like with the '95 computer mounted in the factory '87-96 location on ...
 HeadlightRetainers92-96.JPG
4449 hits | 48.93 KB | Posted: 8/27/10
Headlight Clips '92-96
http://www.dormanproducts.com/p-26048-42190.aspx
The rings on each side of t...
 HeadlightGear.JPG
2285 hits | 51.44 KB | Posted: 3/7/13
'87-96 Headlight Tilt Gear Drive
 Crystal Headlight Conversion.jpg
3522 hits | 59.1 KB | Posted: 8/3/03
Crystal Headlight Conversion
They suck.
See also:
[url=https://www.supermotors.net/vehicles/regist...
 FogLights84.jpg
146 hits | 67.16 KB | Posted: 2/16/24
Fog Light Kit (dealer option)
IF THE IMAGE IS TOO SMALL, click it.
[url=https://www.supermotors....
 AirIntake.jpg
146 hits | 59.23 KB | Posted: 2/17/24
Contrary to popular mythology, the 4.9L/7.5L fresh air intake is NOT inherently better than the 5.0L...
 AirDucts.jpg
128 hits | 77.14 KB | Posted: 2/17/24
V8 Fresh Air Intakes
IF THE IMAGE IS TOO SMALL, click it.
There was a minor design change in '94...
 Filter86EFI.JPG
4688 hits | 92.95 KB | Posted: 8/23/07
Early 5.0L EFI intake & air filter
See also:
[url=https://www.supermotors.net/registry/media/897692...
 Intake86EFI.JPG
5278 hits | 85.65 KB | Posted: 8/23/07
Early 5.0L EFI intake & air filter
See also:
[url=https://www.supermotors.net/registry/media/897692...
 ThrottleHeaterBypass.jpg
176 hits | 91.05 KB | Posted: 2/16/24
If the throttle heater nipples rust (due to coolant neglect), it's usually safe to simply bypass the...
 ThrottleBodyTap.jpg
201 hits | 78.73 KB | Posted: 2/16/24
To repair a throttle body whose heater nipples have rusted (due to coolant neglect), remove the stee...
 V8PlenumT40.JPG
2501 hits | 115.23 KB | Posted: 10/23/14
V8 intake plenums use a T40 bolt (5/16"-18 x 1.25") in the center right position (passenge...
 PlenumT40.jpg
4659 hits | 120.54 KB | Posted: 1/29/15
To make accessing the RH middle plenum bolt easier on 5.0Ls & 5.8Ls, widen the gap. Once the plenum...
 EEC93VIN.JPG
1655 hits | 82.89 KB | Posted: 1/9/15
'93 Bronco 5.8L EEC & VIN
 EEC93CalCodes.JPG
6421 hits | 57.12 KB | Posted: 12/30/11
Calibration Code Locations
http://www.oldfuelinjection.com/?p=17
To remove the EEC, it may be neces...
 EECburned93-58E4OD-A2Z2.JPG
6699 hits | 64.84 KB | Posted: 12/31/11
The EEC from my '93 5.8L E4OD body donor
Note the 3 burned spots under the green/silver electrolytic...
 EECburned92-58E4OD-A2Z.JPG
16873 hits | 54.01 KB | Posted: 12/31/11
cawright's EEC
Note the burned spots near the corner of the big chip.
IF THE IMAGE IS TOO SMALL, cli...
 ElectrolyticCaps93.jpg
2847 hits | 58.31 KB | Posted: 5/21/21
Electrolytic capacitors are known to leak & fail causing a wide variety of symptoms in EFI trucks up...
 EECburned92SG.jpg
2162 hits | 81.43 KB | Posted: 1/9/15
'92 EEC Burned, probably due to reversing polarity with jumper cables, based on the exploded diode
 DLCjumper.JPG
20835 hits | 53.2 KB | Posted: 4/17/11
This is a cheap & easy upgrade to any EEC-IV vehicle: a simple jumper wire twisted into the harness ...
 XTubeNew.JPG
13153 hits | 74.57 KB | Posted: 4/26/06
Crossover Tube E5TZ-9B449-C for upstream secondary ...
 5.8L TAB.jpg
6180 hits | 48.68 KB | Posted: 10/2/04
Thermactor Air Bypass valve
[url=https://www.supermotors.net/registry/media/252396][img]https://www...
 5.8L TAD.jpg
11542 hits | 50.33 KB | Posted: 10/2/04
Thermactor Air Diverter valve & other components. The IAT/ACT is barely visible behind the fuel rai...
 Timing49.JPG
16778 hits | 59.34 KB | Posted: 2/7/13
Timing marks on the 4.9L can be confusing - I've marked the correct ones in white (green fingers) on...
 95F49oilk.jpg
2559 hits | 109.93 KB | Posted: 1/16/18
This truck was neglected and driven with severe oil leaks for so long that the rubber in the harmoni...
 49Lrepaint.jpg
383 hits | 70.18 KB | Posted: 1/29/22
Repainted 4.9L Parts
IF THE IMAGE IS TOO SMALL, click it.
When I take parts off, I usually wash, sa...
 4.9L_ECT.JPG
7221 hits | 85.6 KB | Posted: 4/17/11
'87-95 (MAP) 4.9L Components
TOP view; FRONT is LEFT
'95-96 MAF 4.9L ACT is in the air filter box.
...
 TempSdr49EGR.JPG
3805 hits | 62.88 KB | Posted: 7/6/12
4.9L Temperature Gauge Sender Location
Looking LEFT from behind the RHF tire over the frame under t...
 InjectorBlower.JPG
7576 hits | 77.42 KB | Posted: 7/23/07
Injector Blower used on '87-89 4.9L only. There's a small sensor clipped to the fuel rail that trig...
 FanSw49L.JPG
5499 hits | 72.67 KB | Posted: 4/12/08
Injector Cooling Fan Switch (170 degF) for '87-89 4.9L only
STEMCO 431-5040 F170 89019A
Below 170de...
 EngMtFluidPerches.jpg
188 hits | 39.36 KB | Posted: 2/17/24
4.9L Engine Mount Frame Perches
IF THE IMAGE IS TOO SMALL, click it.
Converting from the fragile, e...
 BlockHeater49.jpg
123 hits | 38.82 KB | Posted: 2/17/24
Block Heater Kit (fits 4.9L F-series/Bronco & possibly others)
IF THE IMAGE IS TOO SMALL, click it.
 FanClearance.JPG
3752 hits | 67.54 KB | Posted: 9/20/08
Fan Clearance between a '95 4.9L & a stock brass 2-core radiator (same thickness as an Aluminum 1-co...
 EngMtsV8.JPG
2398 hits | 63.94 KB | Posted: 3/7/13
Engine Mount Failures on a '93 V8 Bronco
 LiftPlateV8.jpg
1597 hits | 131.32 KB | Posted: 4/25/15
There's no need to buy a lifting plate for an EFI V8. A scrap of angle iron, some chain, and a coup...
 MMO.jpg
335 hits | 108.31 KB | Posted: 8/3/22
Marvel Mystery Oil
IF THE IMAGE IS TOO SMALL, click it.
MMO is effective both as a fuel additive (a...
 OilFilterFL-1A.jpg
1416 hits | 64.29 KB | Posted: 2/27/18
FL-1A Oil Filter fits all smallblock engines withOUT factory oil cooler (use FL-820S).
This filter i...
 FumotoFL1A.jpg
207 hits | 63.59 KB | Posted: 2/16/24
Oil Drain Valve (the original Fumoto like this, or the knock-off EZ Valve) makes changing the oil to...
 FuelTreatments.jpg
439 hits | 120.04 KB | Posted: 1/26/22
These are the fuel treatments I trust. Berryman's will dissolve nearly anything in the tank, fuel li...
 IntakeBolts.jpg
286 hits | 104.47 KB | Posted: 9/3/22
V8 Intake Manifold Corner Bolts
IF THE IMAGE IS TOO SMALL, click it.
The left front corner bolt is ...
 ValleyGunk.JPG
6545 hits | 139.16 KB | Posted: 7/14/03
The inside of a '93 5.8L with ~140,000mi. The previous owner probably used Quaker State.
Its repla...
 3LDOHCtough.JPG
3284 hits | 95.76 KB | Posted: 2/5/09
Oil pan & contents from a 3.0L DOHC Sable
Note the wear on the broken piston chunks - the engine ...
 Sugar.jpg
418 hits | 43.89 KB | Posted: 1/29/22
Sugar in the gas tank was NOT the reason this vehicle was being repaired, so it was very surprising ...
 EngBayClean.jpg
419 hits | 55.87 KB | Posted: 1/26/22
Engine Bay Cleaning
IF THE IMAGE IS TOO SMALL, click it.
Any time the engine is out (and even wh...
 Stethoscope.JPG
11730 hits | 119.07 KB | Posted: 10/5/13
The easiest way to find a vacuum or exhaust leak is with a [url=https://www.amazon.com/dp/B08H8RHFT7...
 ExhManGask.jpg
892 hits | 104.53 KB | Posted: 10/12/22
Exhaust Manifold Gasket
IF THE IMAGE IS TOO SMALL, click it.
Ford didn't install gaskets on these e...
 ExManGasket.jpg
565 hits | 114.47 KB | Posted: 5/21/21
Exhaust Manifolds do not use gaskets because gaskets cause warping, cracks, leaks, & rust. Ford orig...
 ExManBolts.jpg
1803 hits | 44.23 KB | Posted: 5/2/15
V8 Exhaust Manifold Bolts
[url=https://www.supermotors.net/registry/21191/71870-2][img]https://www....
 ExManFlgHdwr.jpg
601 hits | 59.39 KB | Posted: 1/29/22
Exhaust Manifold Flange Hardware
Stud: 391104-S2; Nut: 375636-S7
IF THE IMAGE IS TOO SMALL, click it...
 AntiSeizes.jpg
1472 hits | 56.34 KB | Posted: 3/28/16
AntiSieze Lubricants
Aluminum is the cheapest, for most general use.
Nickel is the most-expensive,...
 LubesDoorTG.jpg
152 hits | 68.2 KB | Posted: 2/16/24
The correct lubricants for door & window seals & runs are dry Teflon (PTFE) and silicone (either spr...
 ThreadInsertV8.JPG
3102 hits | 58 KB | Posted: 4/26/12
V8 Head Thread Inserts
These are in the bores for the upstream secondary air journals to plug the b...
 05Gray33.JPG
3310 hits | 127.98 KB | Posted: 3/25/15
V8 Water Pump Bolts from a '93 5.8L
The 2 left bolts (right in the pic) and 2 others (above & below...
 ExtractWPbolt.jpg
268 hits | 39.96 KB | Posted: 8/3/22
To make extracting a broken bolt easier, rap on it with a small hammer to vibrate the threads, and a...
 WPboltBores.jpg
109 hits | 69.98 KB | Posted: 2/17/24
Water Pump Bolt Bores
IF THE IMAGE IS TOO SMALL, click it.
Since the bores for the 4 long water ...
 Dorman635100.jpg
476 hits | 75.94 KB | Posted: 1/26/22
Dorman 635100 V8 Timing Cover
IF THE IMAGE IS TOO SMALL, click it.
This cover replaces all older se...
 TimingCvrGskt58L.jpg
170 hits | 92.49 KB | Posted: 2/17/24
Timing Cover Gasket Adhesive
IF THE IMAGE IS TOO SMALL, click it.
The crankcase side of the gasket ...
 WaterPump.jpg
136 hits | 101 KB | Posted: 2/18/24
Water Pump Re-Gasket
IF THE IMAGE IS TOO SMALL, click it.
This truck's water pump wasn't leaking...
 HeaterPipeC6.jpg
359 hits | 40.96 KB | Posted: 4/8/22
OE '93-97 Heater Return Pipe for 5.0L/5.8L w/o E4OD at Alternator
IF THE IMAGE IS TOO SMALL, click i...
 HeaterPipeRehose.jpg
551 hits | 57.9 KB | Posted: 4/8/22
Since this heater return pipe assembly (F3TH18C266DB) is NLA, I had no choice but to repair it, whic...
 TubeCleaning.jpg
259 hits | 53.45 KB | Posted: 8/3/22
Tube Cleaning
IF THE IMAGE IS TOO SMALL, click it.
If the throttle heater return tube becomes re...
 CoolantReservoirSediment.jpg
341 hits | 69.7 KB | Posted: 4/8/22
Coolant Reservoir Sediment
IF THE IMAGE IS TOO SMALL, click it.
It only takes a minute with a bent ...
 EngRear93B58.JPG
2315 hits | 61.83 KB | Posted: 3/7/13
Rear Face of a '93 5.8L
 TimingChainSlack.JPG
13277 hits | 64.48 KB | Posted: 7/18/07
Timing Chain Stretch
For more info about this pic:
http://www.gamefishin.com/gfboard/forum_posts.asp...
 BurnedValve.JPG
4363 hits | 34.76 KB | Posted: 11/14/08
Burned valve from an Acura caused by an exhaust leak near the head.
See also:
[url=https://www.supe...
 ThermactorAirSeparateValves.jpg
5996 hits | 74.91 KB | Posted: 1/8/06
Secondary Air Valves for a carburetor engine
 Check Valve.JPG
10482 hits | 96.45 KB | Posted: 7/10/03
Secondary Air Check Valve, temperature sender for the gauge, fuel injector, flywheel
See also:
[url...
 VacHoses94_58L.JPG
4847 hits | 39.76 KB | Posted: 8/24/06
The vacuum harness connector on the back of a '94 MAP 5.8L Bronco. The foreground is the vacuum tre...
 BeltbyHand.jpg
58 hits | 89.96 KB | Posted: 8/16/24
Smallblock V8 Serpentine Belts can usually be changed without tools.
IF THE IMAGE IS TOO SMALL, cli...
 AccessoriesV8.jpg
5727 hits | 95.41 KB | Posted: 7/23/05
V8 Accessories
[url=https://www.supermotors.net/vehicles/registry/media/512259][img]https://www.sup...
 EmissionsV8.jpg
20593 hits | 85.69 KB | Posted: 7/23/05
Emissions Components on an '88 5.0L F150 w/AOD
Before madly ripping out all the emissions systems o...
 EngPaint.jpg
342 hits | 40.74 KB | Posted: 1/26/22
Engine Paint
IF THE IMAGE IS TOO SMALL, click it.
Any time the engine is out for repairs, any me...
 VacSolValves.jpg
269 hits | 72.21 KB | Posted: 8/3/22
Solenoid Vacuum Valves
IF THE IMAGE IS TOO SMALL, click it.
The colored line to the controlled d...
 EVRadapter.jpg
144 hits | 54.83 KB | Posted: 2/16/24
EVR Thermal Compensator
IF THE IMAGE IS TOO SMALL, click it.
Some early EFIs (~'87-90) have this...
 2ndryAirInlet.jpg
141 hits | 85.16 KB | Posted: 2/17/24
Secondary Air Intake Hose
IF THE IMAGE IS TOO SMALL, click it.
Commonly assumed to be disconnect...
 SecondryFltrBrkt93.jpg
275 hits | 60.74 KB | Posted: 1/26/22
Secondary Air Filter/Silencer Bracket & Hose
IF THE IMAGE IS TOO SMALL, click it.
 02SmogPump.JPG
13394 hits | 89.74 KB | Posted: 11/6/09
For a full explanation of emissions system, read [url=http://www.fourdoorbronco.com/board/showthread...
 Air Pipe.JPG
12204 hits | 96.38 KB | Posted: 7/10/03
'95 4.9L I6 Y-pipe, thermactors (cats), & downstream secondary air pipe
IF THE IMAGE IS TOO SMALL, c...
 EVRadapter.jpg
465 hits | 74.4 KB | Posted: 7/11/22
EVR Adapter
Some early EFI EVRs included an inline thermistor for temperature compensation.
See al...
 MufFlg96.JPG
3109 hits | 65.24 KB | Posted: 7/20/12
'96 Bronco Catalyst-to-Muffler Flange requires obsolete gasket F6TZ-5C226-AB; not available from For...
 Solenoids.jpg
14245 hits | 95.24 KB | Posted: 7/10/03
Emissions components on an early EFI.
 AuxBattConn.JPG
5230 hits | 57.64 KB | Posted: 6/21/08
Auxilliary Battery Locations
Trucks with electrical options EXCEPT the aux battery got a plastic-mo...
 PwrPt.jpg
269 hits | 58.38 KB | Posted: 1/26/22
Power Point
IF THE IMAGE IS TOO SMALL, click it.
 MCU83a.JPG
4640 hits | 14.68 KB | Posted: 11/14/08
Rare location of early engine control computer above gas pedal. It's an early cell phone pic, but i...
 YorkSag82E.JPG
2668 hits | 64.02 KB | Posted: 6/26/12
York A/C compressor & Saginaw power steering pump on an '82 E150 302ci
 YorkSpeedoOil.jpg
8435 hits | 93.96 KB | Posted: 7/15/03
Speedometer Gear, York Compressor, & Oil Pressure Sender for V8
[url=https://www.supermotors.net/re...
 YorkVV8.JPG
2269 hits | 101.29 KB | Posted: 1/22/13
York Compressor on V8 w/V-belt
 RecircLine.JPG
20441 hits | 51.24 KB | Posted: 11/9/09
If MAX A/C only blows out the defrost registers, or if it switches to defrost during hard accelerati...
 ACDelete.JPG
13083 hits | 94.45 KB | Posted: 11/22/09
The entire A/C refrigerant system can be removed (or INSTALLED) as a unit from all '80-96 gasoline ...
 AC95B58.JPG
5045 hits | 143.4 KB | Posted: 8/28/13
SOLD Complete charged A/C system from a '95 5.8L EB Bronco.
[url=https://www.supermotors.net/regist...
 HoodLatchSptDifs.jpg
797 hits | 73.31 KB | Posted: 3/13/21
Hood Latch Support differences mean that the '94-97 HFC134a parallel-flow condenser does not fit beh...
 AC49.JPG
3911 hits | 86.63 KB | Posted: 7/6/12
4.9L Air Conditioning System
Only PART of this R-12 condenser has parallel flow (between the 3-way ...
 AChoseInsulation.jpg
569 hits | 47.63 KB | Posted: 1/29/22
A/C Hose Insulation
IF THE IMAGE IS TOO SMALL, click it.
At this age, it's very common for the r...
 AccumulatorR12.JPG
3669 hits | 95.81 KB | Posted: 11/12/12
Accumulator-Dryer Guts
This desiccant is not as resilient as later compositions, so an R-12 accumul...
 ACValves.JPG
3676 hits | 70.58 KB | Posted: 4/17/09
A/C Valves used on some '87-91 compressors. They should always be open (UNscrewed). To operate the...
 EvapLines.JPG
2647 hits | 59.11 KB | Posted: 5/9/13
Evaporator Line Differences
R-12 liquid lines are routed directly from the condenser outlet to the ...
 ScrapTool.JPG
3187 hits | 62.59 KB | Posted: 2/19/13
Garter Spring Tool
I made this in a junkyard when I discovered I didn't have the tools to remove ...
 Evaps.JPG
2930 hits | 63.61 KB | Posted: 4/30/13
Evaporator Core Differences
[url=https://www.supermotors.net/registry/media/980114][img]https://www...
 Orifice.JPG
4733 hits | 70.89 KB | Posted: 10/29/12
Orifice Tube Removal
The red plastic indicates this orifice is sized for R134a; the older R12 orifi...
 08Parts.JPG
8563 hits | 125.88 KB | Posted: 11/22/09
A/C System Components (late R-12 system shown)
Separate suction & discharge hoses were used until ~...
 FinStr.jpg
2254 hits | 73.9 KB | Posted: 9/29/15
Straightening condenser fins with a pick is an agonizingly-slow & tedious job. But it's the only wa...
 EvapClean96F150.jpg
559 hits | 108.7 KB | Posted: 5/26/24
Evaporator Cleaning
IF THE IMAGE IS TOO SMALL, click it.
This truck was bought used with working A/...
 BlowerRepairs.jpg
745 hits | 37.2 KB | Posted: 1/26/22
Blower Repairs
IF THE IMAGE IS TOO SMALL, click it.
Occasionally, the blower needs maintenance that...
 EvapDirt.JPG
5462 hits | 67.39 KB | Posted: 7/6/12
This is an extreme case, but all evaporators collect trash & dirt. With the evaporator out of its h...
 EvapInsltn.jpg
653 hits | 57.64 KB | Posted: 3/13/21
Evaporator Insulation
IF THE IMAGE IS TOO SMALL, click it.
This foil-faced bubble wrap replaces the...
 EvapIns.JPG
5830 hits | 88.84 KB | Posted: 2/4/13
The factory foil-faced fiberglass insulation deteriorates, leaving the vacuum reservoir & cold-air d...
 LowPrSw.JPG
2120 hits | 118.73 KB | Posted: 9/8/14
The guts of an A/C low-pressure (clutch-cycling) switch
The color distinction refers to the ACCUMUL...
 BlowerResistor.JPG
9399 hits | 79.37 KB | Posted: 7/10/03
Blower Resistors
[url=https://www.supermotors.net/registry/media/767950][img]https://www.supermotor...
 TempDoor.JPG
6207 hits | 78.58 KB | Posted: 7/10/03
This is under the hood looking rearward over the R wheelwell with the evaporator cover removed besid...
 HVACseal.JPG
1536 hits | 115.42 KB | Posted: 9/22/14
This gasket between the evaporator housing & the cowl was installed wrong at the factory ~20 years a...
 CoreDrain.JPG
4225 hits | 56.9 KB | Posted: 12/19/12
The drain for the HVAC system serves both the inside (heater core) box, and any spillover from the o...
 Register.jpg
546 hits | 52.33 KB | Posted: 12/28/21
'92-96 Dash Register ( (F2TZ19893C, F3TZ19893H)) Repair
IF THE IMAGE IS TOO SMALL, click it.
1) Thi...
 87 HVAC.jpg
3626 hits | 60.25 KB | Posted: 11/28/04
SOLD HVAC in-dash ducts & control panel for 1987-early 88 F-series & Bronco (with 4 slide knobs & ce...
 87 HVACa.jpg
3869 hits | 67.42 KB | Posted: 11/28/04
SOLD HVAC in-dash ducts & control panel for 1987-early 88 F-series & Bronco (with 4 slide knobs & ce...
 BlendCable87.JPG
3117 hits | 57.03 KB | Posted: 12/30/11
'87-91 Temperature Blend Cable
It's common for the cable to slip out of the adjuster clip, resultin...
 Thermst-RT1139.jpg
187 hits | 42.41 KB | Posted: 2/16/24
Genuine thermostats are still available, and affordable. The rated temperature is 192°F.
IF THE IMAG...
 CoolantNeglect.jpg
1538 hits | 106.02 KB | Posted: 11/30/18
Top - EXPENSIVE
Bottom - affordable
[url=https://www.supermotors.net/registry/media/833143_1][img]h...
 7-BladeV8s.jpg
530 hits | 78.63 KB | Posted: 5/10/20
7-blade fans are good to swap onto trucks that originally had 5-blade fans. These are '95 F250 5.8L...
 TstatChrome.jpg
301 hits | 43.54 KB | Posted: 1/26/22
Chrome
IF THE IMAGE IS TOO SMALL, click it.
Not only does it NOT get ya home, it usually indicates...
 RustRemoval.JPG
445 hits | 38.33 KB | Posted: 1/26/22
Rust Removal
IF THE IMAGE IS TOO SMALL, click it.
Even without a sandblaster, rust can be effect...
 PresTest.JPG
1770 hits | 108.57 KB | Posted: 9/19/14
Cooling System Pressure Test
After filling the system absolutely full (no air), and checking every ...
 BorePlug93-50Lhead.jpg
206 hits | 84.15 KB | Posted: 2/17/24
Bore Plug Replacement
IF THE IMAGE IS TOO SMALL, click it.
It took longer to find this rusted bo...
 BorePlugs9658EB.jpg
172 hits | 68.5 KB | Posted: 2/17/24
Bore Plugs
IF THE IMAGE IS TOO SMALL, click it.
After years of coolant neglect, this truck's bor...
 HeaterValve.JPG
2850 hits | 43.74 KB | Posted: 6/9/13
Explorer Heater Bypass Valve
With a little creative vacuum-line routing, this valve is easy to retr...
 FenderFillers.JPG
1980 hits | 70.35 KB | Posted: 12/19/12
These foam fillers are often lost, and may have only been used on high-trim trucks. The plastic fac...
 CowlDrain.JPG
7404 hits | 70.25 KB | Posted: 7/10/03
This is where leaves build up, on both sides of the truck. They come thru the wiper valance slots (...
 CowlDrainPacked.JPG
3810 hits | 83.21 KB | Posted: 1/1/12
Cowl drains need to be cleaned periodically because rotting leaves, dirt, insects, & fungus build up...
 Leaves.jpg
14422 hits | 74.76 KB | Posted: 7/10/03
This shows where leaves build up in '80-96 truck ductwork. If they build up around the resistors (g...
 ACdumdum.jpg
408 hits | 61.46 KB | Posted: 1/26/22
DumDum
IF THE IMAGE IS TOO SMALL, click it.
I don't know the actual name of this sealant, but it's ...
 TackyTape.JPG
3251 hits | 39.79 KB | Posted: 5/3/12
Tacky Tape is effective as an air conditioning duct sealant, body sealant, and temporary adhesive. ...
 Wiper Valance 2.JPG
5516 hits | 116.24 KB | Posted: 7/10/03
This shows the differences in the '87-91 & '92-96 (F6TZ15022A68AA) wiper valances. The '80-86 valan...
 Fender Shims.jpg
1738 hits | 143.81 KB | Posted: 9/22/14
Ford used cardboard shims between the fenders & cowl horns.
 CowlPlugs.jpg
366 hits | 53.21 KB | Posted: 1/26/22
Cowl Top Plugs
IF THE IMAGE IS TOO SMALL, click it.
The left (driver's) plug was not used until ...
 CowlScreen97.jpg
185 hits | 83.47 KB | Posted: 2/16/24
Cowl Screen
IF THE IMAGE IS TOO SMALL, click it.
To exclude both leaves from above & rodents fro...
 BodyAlignmentCS.jpg
272 hits | 77.86 KB | Posted: 1/26/22
Core Support Alignment
IF THE IMAGE IS TOO SMALL, click it.
Even without removing the front bump...
 Shocks.jpg
7527 hits | 67.58 KB | Posted: 7/10/03
These 3 PNs are the ones used for '80-96 trucks with quad front shocks. But they're only available ...
 GabrielG63410.jpg
1402 hits | 28.96 KB | Posted: 10/23/14
This shock fits the front front of quad front shock suspensions at stock height, and includes a repl...
 Shock Studs.jpg
4529 hits | 29.1 KB | Posted: 9/27/04
Front front shock studs, included in the Gabriel & CarQuest boxes.
[url=https://www.supermotors.net...
 ShocksGabEnergy.jpg
328 hits | 75.41 KB | Posted: 2/16/24
Shock Bushings (black Energy poly)
IF THE IMAGE IS TOO SMALL, click it.
Even new shocks benefit fro...
 ShockEyePoly.jpg
346 hits | 76.88 KB | Posted: 1/26/22
Shock Eye Bushings
IF THE IMAGE IS TOO SMALL, click it.
Even on new shocks, polyurethane bushings a...
 CoilPerches4WDcmpr.jpg
135 hits | 97.02 KB | Posted: 2/16/24
Anti-Sway Bar End Link Attachments
IF THE IMAGE IS TOO SMALL, click it.
The 1-piece cast coil pe...
 TIB warning.jpg
146 hits | 134.98 KB | Posted: 2/16/24
Not for nothing, I-beams are marked with the warning "DO NOT BEND - HEAT OR WELD".
IF THE IMAGE I...
 BsBars.jpg
1550 hits | 37.94 KB | Posted: 4/26/15
Bull... Bars
IF THE IMAGE IS TOO SMALL, click it.
How much are you willing to pay for them? Note t...
 BSbar2.jpg
781 hits | 99.81 KB | Posted: 1/16/18
This is barely strong enough to hold the lights up - much less actually running into trees, or even ...
 BSbar3.jpg
577 hits | 75 KB | Posted: 7/21/19
This is what happens when a cosmetic part gets used for what it's supposed to LOOK like.
[url=https...
 BSBar4.jpg
369 hits | 43.43 KB | Posted: 4/4/21
Even bars with tough-sounding names are collapsible. This one still pushed the bumper into the body ...
 Bumpr08F450.jpg
614 hits | 66.67 KB | Posted: 1/27/19
The original bumper would have worked better - it wouldn't have stuck out so far that it hit as many...
 HoodLatch.jpg
297 hits | 32.38 KB | Posted: 11/7/21
'92-96 Hood Latch Operation ('80-91 similar)
 HoodLatchSpring.jpg
225 hits | 24.01 KB | Posted: 1/26/22
Hood Latch Spring
IF THE IMAGE IS TOO SMALL, click it.
If the hood jams, it may be due to the sp...
 SwayBarFcompare.JPG
2292 hits | 75.09 KB | Posted: 1/16/13
Despite the changes in frame contours & mounting points, the '93 Bronco front sway bar is identical ...
 Sway Bracket.jpg
4014 hits | 71.93 KB | Posted: 8/16/03
Pre-'92 sway bar attached to front crossmember. '92-96s are attached similarly.
[url=https://www.su...
 ExtendedRadiusArms.JPG
1325 hits | 66.84 KB | Posted: 1/9/15
Extended Radius Arms on a '94 Bronco I saw around 2000
 D44-50.jpg
386 hits | 96.01 KB | Posted: 3/13/21
Dana 44IFS vs. 50IFS TTB comparison
[url=https://www.supermotors.net/registry/media/255498][img]htt...
 Alignment.jpg
811 hits | 74.98 KB | Posted: 3/15/19
This is among the best alignment machines available today, and the road-force balancer behind it is ...
 CamberXtract.jpg
676 hits | 62.53 KB | Posted: 8/3/22
Camber Cam Extraction
IF THE IMAGE IS TOO SMALL, click it.
After throwing my shoulder out for 2 mon...
 RadiusArmBolts.jpg
250 hits | 65.12 KB | Posted: 1/26/22
Radius Arm Bolt Removal
IF THE IMAGE IS TOO SMALL, click it.
 D50.JPG
5212 hits | 85.02 KB | Posted: 7/10/03
Dana 50IFS axles can be differentiated from D44IFSs by the "50" cast into the third member...
 SwissCheeseFrame_Sliders.jpg
5482 hits | 62.64 KB | Posted: 11/9/05
Swiss-Cheese Frame: '80-81 only
Sliding Side Windows: '80-82 only
Chrome Horse Emblems: '80-82 only
...
 FramePaint.jpg
568 hits | 52.25 KB | Posted: 3/13/21
Frame Paint is more likely to cause rust than to prevent it, even when applied at the factory. Rubbe...
 Undercoating95B.jpg
680 hits | 44.17 KB | Posted: 8/24/22
Undercoating
IF THE IMAGE IS TOO SMALL, click it.
Since paint dries too hard & brittle for the unde...
 U-joint.JPG
5158 hits | 69.12 KB | Posted: 11/13/05
Not good. I let it vibrate for a LONG time before it finally wore through the cap AND the DC yoke.
...
 U-jointWear.jpg
1358 hits | 72.59 KB | Posted: 2/10/16
Greasable U-joints...
Not nearly as effective or foolproof as some people think. This one WAS grea...
 Ujoint01.jpg
967 hits | 99.25 KB | Posted: 10/25/16
The best way I know to prevent needles from dropping into or out of the cups when hammering a cap on...
 Dshafts07.JPG
1288 hits | 126.11 KB | Posted: 10/24/14
Fill u-joint caps with grease to hold needle bearings in-place during assembly, or immediately after...
 PressShafts.JPG
3327 hits | 58.35 KB | Posted: 11/11/05
Pressing a U-joint out
[url=https://www.supermotors.net/registry/media/284976][img]https://www.supe...
 UjointSealedJournal.jpg
1067 hits | 72.01 KB | Posted: 10/25/16
There are no grease journals in a sealed (non-greasable) trunnion. The bores are blind, and are not...
 Driveshafts BroncoE4OD.JPG
3395 hits | 84.03 KB | Posted: 9/12/05
Driveshafts for a Bronco with E4OD & BW1356
[url=https://www.supermotors.net/registry/media/284976]...
 Driveshafts.JPG
3543 hits | 69.62 KB | Posted: 7/10/03
Front shafts are the same for all pickups & Broncos with the same transmission length. Rear shafts ...
 Axle joint.JPG
3488 hits | 104.75 KB | Posted: 8/27/03
Slip Joint, D44IFS right inboard shaft
[url=https://www.supermotors.net/vehicles/registry/media/723...
 HomeLinkMemo.JPG
3351 hits | 50.71 KB | Posted: 3/18/07
Homelink & Voice Recorder from '99 Explorer sun visor
I haven't decided what to do with this yet,...
 Clock80Pull.JPG
2452 hits | 48.81 KB | Posted: 4/28/09
Clock with Push-Pull Buttons
These are very rare, and I have yet to find one in working condition...
 CB80.JPG
2959 hits | 56.86 KB | Posted: 4/28/09
Factory CB in a 1980 Ranger F150 Trailer Special
If the buttons weren't missing from the handset,...
 ReelLight1.JPG
6585 hits | 70.04 KB | Posted: 7/10/03
This light was used on ~'80~90 Ford trucks and some Jeep Cherokees (with a different connector). It...
 HoodTilt.jpg
4982 hits | 59.1 KB | Posted: 8/23/03
Automatic Engine Compartment Lamp takes bulb #912 (& others)
The metal bulb is the tilt switch, w...
 ColTilt.jpg
116 hits | 83.27 KB | Posted: 2/17/24
Pre-'92 Tilt Column
IF THE IMAGE IS TOO SMALL, click it.
 CruiseNoTilt.JPG
1629 hits | 91.42 KB | Posted: 1/9/15
Cruise non-Tilt Column
I used to think this didn't exist.
 TiltID.jpg
360 hits | 46.87 KB | Posted: 1/26/22
Tilt Column Identification
IF THE IMAGE IS TOO SMALL, click it.
The front of the hole where the ...
 SteeringWheel 1.JPG
5461 hits | 87.7 KB | Posted: 12/6/04
This is how the cruise button wires are connected on all pre-'93 trucks. The horn pad connector is ...
 SteeringWheel 2.JPG
5203 hits | 76.25 KB | Posted: 12/6/04
A cheap puller makes the job easier, but the wheel can usually be removed by hooking your knees behi...
 SteeringWheel 3.JPG
3661 hits | 84.87 KB | Posted: 12/6/04
The white crescent-shaped turn signal cam commonly breaks, and you can see where I've spliced this o...
 IntermediateShaft87-91.jpg
752 hits | 52.94 KB | Posted: 3/15/19
The '87-91 Steering Intermediate Shaft (between the column & box) is a good upgrade for '80-86 truck...
 PSFswell.jpg
260 hits | 55.2 KB | Posted: 1/26/22
Power Steering Fluid
IF THE IMAGE IS TOO SMALL, click it.
Fluid marketed as "power steering...
 PitmanPuller1.JPG
5512 hits | 66.01 KB | Posted: 12/22/10
This Snap-On (DarthVader-style [url=https://shop.snapon.com/product/Pitman-Arm-Pullers/Pitman-Arm-Pu...
 PitmanArm.jpg
115 hits | 110.98 KB | Posted: 2/18/24
'80-96/7 Power Steering Pitman Arm
IF THE IMAGE IS TOO SMALL, click it.
The 4 key splines are 90...
 TREboots96B.jpg
118 hits | 88.5 KB | Posted: 2/18/24
Black Energy Poly Tie Rod End Boots
Since original tie rod ends frequently survive to this age, r...
 SteeringDamper.jpg
254 hits | 71.54 KB | Posted: 1/26/22
Steering Damper Installation w/Quad Front Shocks
IF THE IMAGE IS TOO SMALL, click it.
I'm not a ...
 Turn Cam.JPG
5038 hits | 63.53 KB | Posted: 7/10/03
HELP! Turn Signal Cam (JUNK)
NAPA part# DL6126 is superior, but still a PITA
The bosses on the othe...
 ClockSpringExploded.jpg
6155 hits | 26.35 KB | Posted: 12/2/05
Clock Spring ('94-up with driver's airbag) showing the film circuit which abrades & breaks over time...
 SlidingContact.JPG
2940 hits | 59.13 KB | Posted: 12/30/11
'92-93 Cruise & Horn Sliding Contacts, also used on '94-98 over 8500GVWR
[url=https://www.supermoto...
 ColumnDecontented.jpg
1475 hits | 55.3 KB | Posted: 1/9/15
'92-up Decontented Steering Columns are the same as fully-optioned columns, but with functional part...
 ShiftScrsLoose.JPG
2747 hits | 48.53 KB | Posted: 2/15/16
Shifter Arm Screws need to be tightened, but adding blue threadlocker will help keep them tight long...
 Column 96 L.JPG
6858 hits | 58.08 KB | Posted: 7/10/03
Orange: shift cable
Green: wheel lock
Red: shift lock solenoid
Blue: shifter clamps
Pink: ignition s...
 Column 96 R.JPG
9772 hits | 58.3 KB | Posted: 7/10/03
Orange: shift cable
Green: wheel lock
Red: shift lock solenoid
Blue: shifter clamps
Pink: ignition s...
 IgnitionRodTilt.JPG
4511 hits | 82.91 KB | Posted: 7/10/03
This is the ignition pushrod in '92-96 tilt columns. It's the plastic gear rack. The L section of ...
 Airbag.JPG
6780 hits | 84.02 KB | Posted: 7/10/03
This is the back of a '94-96 airbag, the same for most Ford cars & trucks.
Red: shaped charge
Yellow...
 DashShell92-96.JPG
2255 hits | 99.1 KB | Posted: 12/30/11
Dash Shell & Ducts '92-96
Note that the dash structure is actually the plastic ducts - the colore...
 AcceleratorPedal.jpg
3826 hits | 70.58 KB | Posted: 3/22/09
'92-96 Accelerator Pedal Failure
The pedal arm is simply pressed onto the splines of the shaft, a...
 VSS 2.JPG
7142 hits | 90.41 KB | Posted: 7/10/03
This is the Cable Speed Sensor (E2AZ-9E731-A) used on early (pre-'87) cruise systems to generate a V...
 RelayBlock.JPG
5227 hits | 43.9 KB | Posted: 3/16/06
Relay Blocks
These slide-together relay sockets are from a cheap aftermarket alarm, but they can b...
 HeadlightKnobClip.JPG
4629 hits | 31.51 KB | Posted: 10/14/10
Headlight Knob Catch
This '92-96 headlight knob's collar was broken away, allowing a better view of...
 WCMs3.JPG
2918 hits | 87.94 KB | Posted: 1/3/09
WIper Control Modules used from '92-up
I used to think they all took the same module, but the white...
 FogLWells.jpg
2510 hits | 32.55 KB | Posted: 9/11/14
'93-95 Lightning Fog Light Switch
 AntiSeizeRust.JPG
1981 hits | 64.65 KB | Posted: 7/12/12
The nickel anti-seize I applied to this bolt during the poly bushing installation worked for what it...
 AmpWire.jpg
367 hits | 70.29 KB | Posted: 1/29/22
Amp or Inverter Wire Penetration
IF THE IMAGE IS TOO SMALL, click it.
Instead of drilling a hole in...
 Crimp.JPG
6924 hits | 50.6 KB | Posted: 4/17/11
Crimping Electrical Terminals
(This applies equally to crimping butt-splices, which might be the mos...
 SplicePierce.JPG
3773 hits | 79.83 KB | Posted: 3/10/12
Pierce Splice
IF THE IMAGE IS TOO SMALL, click it.
This type of splice allows a circuit to be tappe...
 BatteryClamps.JPG
3358 hits | 61.88 KB | Posted: 4/15/06
500A Battery Clamps from NAPA for $6.69/pack of 2. I'll be using one pair for a cheapo winch that p...
 CoolntResHook.jpg
140 hits | 49.58 KB | Posted: 2/16/24
Coolant/Windshield Reservoir Hook
IF THE IMAGE IS TOO SMALL, click it.
Instead of the pushpin Fo...
 WasherMotor.jpg
114 hits | 58.21 KB | Posted: 2/17/24
To remove the washer pump motor, pick most of the tabs on the retainer ring up in the tank bore.
IF...
 WiperMotorRevised.JPG
7755 hits | 107.07 KB | Posted: 10/13/10
Revised single-connector Wiper Motor
ERROR - this motor is only a revision for '92-94 trucks; it's s...
 WiperMtrArm.jpg
143 hits | 69.8 KB | Posted: 2/17/24
Wiper Motor Arm Clip
IF THE IMAGE IS TOO SMALL, click it.
To remove, lift the top (rear when ins...
 WiperLatch.JPG
4023 hits | 53.72 KB | Posted: 10/8/10
To remove a wiper arm, lift it away from the glass and slide the latch up to hold the arm. Then pul...
 Windshields.jpg
241 hits | 38.73 KB | Posted: 8/3/22
Windshield Brands
IF THE IMAGE IS TOO SMALL, click it.
These are most of the common windshield bran...
 WStrimDtl.jpg
1504 hits | 50.11 KB | Posted: 1/31/16
'94-97 Windshield Trim Insert Details
The top trim (Left in the photo) has both a hard plastic &quo...
 WSTool_.jpg
11250 hits | 34.04 KB | Posted: 5/12/07
This is a cheapo version of the tool, but it's effective. Go to the NEXT several pics...
See also:...
 WS_Tool1.jpg
7333 hits | 44.73 KB | Posted: 5/12/07
The tool slips under the windshield trim. Slide it to hook the clips, beginning at a joint near a c...
 WS_Tool4.jpg
6254 hits | 65.73 KB | Posted: 5/12/07
Hold the tool at an angle so one point goes behind the clip.
See also:
[url=https://www.supermotors...
 WS_Tool5.jpg
5970 hits | 41.95 KB | Posted: 5/12/07
Turn the tool to pry the clip slightly toward the center of the w/s, then lift the trim just enough ...
 WS_Tool9.jpg
6643 hits | 48.52 KB | Posted: 5/12/07
The lower trim clips are different, but they're released the same way.
These clips are intermittent...
 WS_Tool7.jpg
6281 hits | 45.25 KB | Posted: 5/12/07
The lower trim clips are different, but they're released the same way.
These clips are intermittent...
 GrabHdlA93.jpg
339 hits | 124.93 KB | Posted: 1/26/22
'80-96 Grab Handle Installation
IF THE IMAGE IS TOO SMALL, click it.
After finding a suitable gr...
 FanClutchTools.JPG
6580 hits | 30.59 KB | Posted: 12/4/09
Homemade Fan Clutch Tools
The angle iron holds the water pump pulley bolts while the leaf spring ...
 HandleHeatVentWdo.jpg
124 hits | 84.48 KB | Posted: 2/16/24
Black plastic that has oxidized can be restored to some degree simply by heating.
IF THE IMAGE IS T...
 RearArmrestRepair.JPG
2751 hits | 61.69 KB | Posted: 12/31/11
'92-96 Bronco Rear Armrest Reinforcement
IF THE IMAGE IS TOO SMALL, click it.
Don't wait until they...
 RearStLatch.jpg
148 hits | 84.51 KB | Posted: 2/16/24
'78-96 Bronco Rear Seat Latch
IF THE IMAGE IS TOO SMALL, click it.
This one sat in its well full...
 StrikeBar.JPG
3274 hits | 75.93 KB | Posted: 3/13/13
The insulator commonly wears off the rear seat strike, so to reduce noise, it must be replaced. 1&q...
 TetherPoints.jpg
446 hits | 39.42 KB | Posted: 1/11/21
Child seat tether points
IF THE IMAGE IS TOO SMALL, click it.
Email me through my profile here to p...
 Interior96XL.JPG
5948 hits | 51.81 KB | Posted: 12/2/09
'92-96 Low Interior Trim
Plastic floor cover, vinyl upholstery, no headliners, low-trim bedwalls
[...
 CptChr88.JPG
3654 hits | 85.64 KB | Posted: 12/12/11
'88 Captain's Chair with inboard armrests only
 BadgesBronco92-20.jpg
476 hits | 50.87 KB | Posted: 7/11/20
'92-96 Eddie Bauer Bronco Fender Badges
The reproduction badges available in 2020 are not identical...
 DashPads7a1.jpg
2339 hits | 87.79 KB | Posted: 1/21/18
'92-96 F-series/Bronco Interior Colors & Codes
IF THE IMAGE IS TOO SMALL, click it.
The letter code...
 PaintColorsEB956.jpg
406 hits | 45.53 KB | Posted: 4/4/22
'94-96 Eddie Bauer Exterior Trim Paint Colors
IF THE IMAGE IS TOO SMALL, click it.
Tucson Bronze...
 DashPadsReds.jpg
441 hits | 54.83 KB | Posted: 1/29/22
'92-96/7 Red Dash Colors
IF THE IMAGE IS TOO SMALL, click it.
 RoofDiffs80-86.JPG
3446 hits | 41.91 KB | Posted: 11/14/08
'80-86 Roof Differences
Note that this truck also has the later-style windshield with the blackout ...
 ScrewExtract.jpg
242 hits | 84.49 KB | Posted: 1/29/22
Screw Extraction
IF THE IMAGE IS TOO SMALL, click it.
For screws (especially Phillips & Torx) wi...
 CHMSL-Cargo.jpg
338 hits | 53.81 KB | Posted: 6/14/21
Center High-Mount Stop Lamp vs. Cargo Lamp comparison
 CHMSL-PN.jpg
260 hits | 90.44 KB | Posted: 6/12/24
CHMSL Changes
IF THE IMAGE IS TOO SMALL, click it.
The '92-93 Bronco (only) CHMSL has an open-top c...
 CHMSLscrews.jpg
232 hits | 63.21 KB | Posted: 6/12/24
CHMSL Screws
IF THE IMAGE IS TOO SMALL, click it.
The early screws are ~5/16"(8mm) shorter than lat...
 CHMSLstuck.jpg
133 hits | 52.71 KB | Posted: 2/16/24
CHMSL Stuck
IF THE IMAGE IS TOO SMALL, click it.
This can be a problem if the wrong bulbs are in...
 Glass ClearTint.jpg
135 hits | 57.5 KB | Posted: 2/16/24
Glass Colors
IF THE IMAGE IS TOO SMALL, click it.
This is what Ford means by "tinted" - the slig...
 SpoilerR.JPG
3034 hits | 54.09 KB | Posted: 7/23/07
Aftermarket Rear Spoiler on an '80-91 Bronco
 3BoltMirror.JPG
3686 hits | 57.24 KB | Posted: 7/23/07
Rare 1980 6-bolt 2-Position Mirror used on F250-350 only
Note the extra arm between the hi-low arm ...
 BallPinConsole.JPG
3161 hits | 71.91 KB | Posted: 7/23/07
Center Console with '78-80 ball-pin snaps instead of the more common '81-91 glove-box-style catch.
...
 BplrStrctr.JPG
1571 hits | 53.91 KB | Posted: 5/9/13
B-pillar substructure
[url=https://www.supermotors.net/registry/media/968674][img]https://www.super...
 MountTubes.JPG
1632 hits | 75.28 KB | Posted: 5/6/13
Rather than bolt/weld an internal cage to the body, or cut thru the body to attach an interior struc...
 BodyMountLHR1.JPG
1303 hits | 103.9 KB | Posted: 5/5/15
Rear Body Crossmember Construction
Seam sealer has been added between the lower C-pillar, inner bed...
 CptChrLlimit.jpg
1209 hits | 118.82 KB | Posted: 9/19/14
Captain's Chair Driver's Limit Cable
This prevents the driver's chair from blowing the horn when it...
 CptChrTilt.jpg
1282 hits | 127.96 KB | Posted: 9/19/14
How to tilt a '90-96 Captain's Chair
 SeatBaseTrimScrew.jpg
288 hits | 39.14 KB | Posted: 1/5/22
'92-96 Seat Base Trim Fastener
IF THE IMAGE IS TOO SMALL, click it.
This fastener is problematic...
 Armrest94-96.JPG
1657 hits | 97.2 KB | Posted: 12/22/13
'94-96 Bronco/F Driver's Armrest
IF THE IMAGE IS TOO SMALL, click it.
This is the first one I've fo...
 CarpetClean.jpg
259 hits | 67.44 KB | Posted: 8/3/22
Carpet Cleaning
IF THE IMAGE IS TOO SMALL, click it.
Even a good vacuuming or generous rinsing can'...
 BenchMounts.JPG
4583 hits | 79.99 KB | Posted: 11/14/09
Seat Mounting Points
The unused bolt holes have rubber plugs, and are not threaded. Threads are cu...
 SeatBoltHoles.JPG
4279 hits | 60.3 KB | Posted: 11/10/11
'90-96 Seat Bolt Holes
IF THE IMAGE IS TOO SMALL, click it.
The locations originally UNused by the ...
 ScrapNut.JPG
3604 hits | 76.45 KB | Posted: 7/2/12
Scrap Nut
Many stock bolts are designed to self-thread into unthreaded blocks of steel, which are c...
 TorxX.jpg
247 hits | 35.98 KB | Posted: 1/26/22
Seat Belt Bolt Extraction
IF THE IMAGE IS TOO SMALL, click it.
This bolt was seized so badly tha...
 Jump Seats.JPG
5616 hits | 94.07 KB | Posted: 7/10/03
Jump Seats from '78 Nissan extended cab pickup with tan vinyl upholstery & backrests.
I'm still not...
 JumpSource.JPG
2079 hits | 117.75 KB | Posted: 6/23/14
Jump Seats from '78 Nissan extended cab pickup are identical to rare early-80s Bronco 3rd-row.
I'm ...
 SportBarMts93.jpg
141 hits | 80.37 KB | Posted: 2/16/24
Even this '93 Bronco body is still dimpled for the sport bar that was only offered in the early 80s....
 SeatBase82E.JPG
1944 hits | 79 KB | Posted: 6/26/12
Rare early pivoting van seat pedestal
 Stepshield88068.JPG
1474 hits | 124.13 KB | Posted: 9/6/14
AutoVentshade Stepshield 88068 (pair) fits '80-96 Broncos & F-series, but production was stopped aro...
 FloorWiring93.JPG
3407 hits | 53.61 KB | Posted: 11/15/09
Floor Wiring in a '93 EB Bronco
It's especially common for the dome light wiring under the seat bel...
 DomeTerms.jpg
455 hits | 64.72 KB | Posted: 1/29/22
Dome Lamp Terminals
IF THE IMAGE IS TOO SMALL, click it.
See also:
[url=https://www.supermotors.net...
 DoorSw93.JPG
2012 hits | 88.13 KB | Posted: 6/9/13
The rare '92-93 B-pillar courtesy lamp switch is a poor design that depends on a fragile rubber boot...
 B-PillarPadding.JPG
4557 hits | 70.96 KB | Posted: 10/19/11
B-pillar sound padding commonly absorbs water and causes wiring to corrode away to a green slime.
T...
 Airbag Falsing Sensor.JPG
8237 hits | 56.45 KB | Posted: 11/25/05
Bronco airbag safing sensor at base of R B-pillar '94-96 ONLY.
See also:
[url=https://www.supermoto...
 BeltRear92.jpg
323 hits | 44.17 KB | Posted: 1/26/22
'92-96 Bronco Rear Seat Shoulder Belt Reel Mounting
IF THE IMAGE IS TOO SMALL, click it.
 ShifterCovers.JPG
2997 hits | 67.59 KB | Posted: 10/8/10
The butyl sealant between the trans plate & the floor is relatively easy to separate. But the panel...
 ShifterPositionM5OD.jpg
327 hits | 69.68 KB | Posted: 6/3/22
Mazda M5OD-R2 Shifter Position
IF THE IMAGE IS TOO SMALL, click it.
 ShifterBoltMazda.jpg
1018 hits | 39.96 KB | Posted: 5/12/22
Mazda M5OD (and possibly others) Shifter Wedge Bolt (7L197)
The nut is normally installed on the ...
 36Shifter5.JPG
2160 hits | 95.45 KB | Posted: 4/26/18
Shifter Bolt for Mazda M5OD-R2
To remove the shifter, remove the nut, and thread it onto the expose...
 TransGaskets.jpg
8958 hits | 59.71 KB | Posted: 10/15/09
Transmission Gasket ID
Click the pic to supersize.
See also:
[url=https://www.supermotors.net/regi...
 Access-C6-E4OD.jpg
116 hits | 35.93 KB | Posted: 2/17/24
Bellhousing Access Plates
IF THE IMAGE IS TOO SMALL, click it.
 E4ODTC.JPG
2589 hits | 87.68 KB | Posted: 3/27/12
E4OD Torque Converter Installation
If the torque converter is not FULLY seated before the engine ...
 Dipsticks96ATFcmpr.jpg
148 hits | 69.82 KB | Posted: 2/16/24
'96 E4OD Dipsticks
IF THE IMAGE IS TOO SMALL, click it.
Bronco & F-series E4OD dipsticks got not...
 ShIndCable.JPG
337 hits | 84.87 KB | Posted: 1/26/22
Shift Indicator Tube (Early)
IF THE IMAGE IS TOO SMALL, click it.
 MLPS-E4OD.JPG
9627 hits | 75.79 KB | Posted: 11/14/09
MLPS on a '93 E4OD (L side)
TSB 95-2-12 E4OD Diagnostic Trouble Codes and/or Harsh Shift Concerns -...
 DipsticksE4OD93-96.jpg
307 hits | 76.78 KB | Posted: 1/26/22
F-series/Bronco E4OD Dipstick & Tube Variations
IF THE IMAGE IS TOO SMALL, click it.
See also:
[url...
 20181009_181928.jpg
673 hits | 65.92 KB | Posted: 10/10/18
Ford Racing Performance Parts (FRPP) cast Aluminum E4OD pan
 Magnefines.JPG
3534 hits | 91.89 KB | Posted: 10/17/12
Magnefine Filters are cheaper in bulk on eBay. Raybestos has an official dealer, but I got these sl...
 PNP93C6.jpg
116 hits | 68.49 KB | Posted: 2/18/24
'93 F250 C6 Park Neutral Position (PNP) Switch
IF THE IMAGE IS TOO SMALL, click it.
 TransMt275.jpg
121 hits | 65.18 KB | Posted: 2/17/24
There are only 2 transmission mounts for most '87-96 trucks, and the only difference is the spacing ...
 AOD 4WD Adapter.jpg
3445 hits | 72.9 KB | Posted: 8/6/03
4WD extension for AOD transmission
 Xmbr-ID.jpg
226 hits | 48.98 KB | Posted: 1/26/22
Crossmember ID
IF THE IMAGE IS TOO SMALL, click it.
Most Ford transmission crossmembers have the...
 NP-208 F.JPG
3446 hits | 115.53 KB | Posted: 7/10/03
'83 NP-208F front
See also:
[url=https://www.supermotors.net/registry/media/831121][img]https://www...
 NP-208 R.JPG
3324 hits | 106.41 KB | Posted: 7/10/03
'83 NP-208F rear
See also:
[url=https://www.supermotors.net/registry/media/831121][img]https://www....
 TcaseShifterBezel.JPG
2758 hits | 80.4 KB | Posted: 1/2/12
'87-96 Transfer Case Shifter Bezel Screws
IF THE IMAGE IS TOO SMALL, click it.
Because of the deep ...
 BW1356PTO.jpg
5238 hits | 27.42 KB | Posted: 11/14/08
Rare PTO-style BW1356 from ...
 BW1345.JPG
4935 hits | 96.09 KB | Posted: 1/8/09
BW 1345
IF THE IMAGE IS TOO SMALL, click it.
Note that ALL applications use a fixed rear yoke.
[ur...
 BW1356ID.JPG
5735 hits | 63.13 KB | Posted: 12/20/09
Borg-Warner Transfer Case Identification
The model number is cast into the rear housing, and someti...
 LincolnLocker.JPG
3058 hits | 73.46 KB | Posted: 8/29/09
A welded differential, commonly called a "Lincoln-locker" in reference to the popular brand of weldi...
 BW-1356 Slip.JPG
4112 hits | 119 KB | Posted: 7/10/03
SOLD BW-1356 for F-series with mechanical shifter
[url=https://www.supermotors.net/vehicles/registr...
 DShaftDiffs.JPG
1850 hits | 103.95 KB | Posted: 11/3/12
Driveshaft Differences (Yoke/Companion Flange)
 GreaseCap.jpg
539 hits | 69.51 KB | Posted: 1/27/19
This is the tool Ford recommends for removing hammer-on grease caps. Tap the pliers with a small ha...
 KeystoneUnclamp.jpg
150 hits | 72.95 KB | Posted: 2/16/24
To open a keystone clamp without damage so it can be re-clamped later, simply insert a pocket screwd...
 TrailerBrakeCtrlConnector.jpg
137 hits | 72.77 KB | Posted: 2/18/24
'94-96/7 Trailer Brake Controller Connector
IF THE IMAGE IS TOO SMALL, click it.
The '92-93 conn...
 LEDresistor.jpg
4687 hits | 77.1 KB | Posted: 4/30/21
Brake LED Resistor
IF THE IMAGE IS TOO SMALL, click it.
Since there are many other systems (ABS, cr...
 95BrUSBpwrpt.jpg
91 hits | 75.44 KB | Posted: 8/14/24
USB Power Adapter
IF THE IMAGE IS TOO SMALL, click it.
These common adapters are slightly larger...
 RearConnsF93.jpg
401 hits | 73.96 KB | Posted: 1/26/22
F-series Fleetside SRW Rear Frame Connectors
IF THE IMAGE IS TOO SMALL, click it.
 RecvrInst.jpg
352 hits | 78.1 KB | Posted: 1/26/22
Hitch Receiver Installation
IF THE IMAGE IS TOO SMALL, click it.
So that the nuts can be tighten...
 BedBoltCmprF.jpg
1011 hits | 64.96 KB | Posted: 6/26/22
F-series Bed Bolts
IF THE IMAGE IS TOO SMALL, click it.
New-style bed bolts (M14x2.00) can be used ...
 BedBoltCmprR.jpg
504 hits | 90.94 KB | Posted: 6/26/22
Ranger Bed Bolts
IF THE IMAGE IS TOO SMALL, click it.
Ranger bed bolts (M14x2.00) can be used to re...
 BedBoltNewChased.jpg
450 hits | 93.41 KB | Posted: 6/26/22
New-style bed bolt & U-nut (M14x2.00)
IF THE IMAGE IS TOO SMALL, click it.
If the aftermarket nut i...
 TrailerConns93.jpg
151 hits | 76.21 KB | Posted: 2/18/24
Rear Frame Connectors (on a '93 F250)
IF THE IMAGE IS TOO SMALL, click it.
[url=https://www.supe...
 BumpRFlrBolt.jpg
156 hits | 54.21 KB | Posted: 2/17/24
Bronco rear bumper filler is bolted to the frame with U-nuts on the plastic filler. Because they col...
 BumperRivets.jpg
153 hits | 86.16 KB | Posted: 2/17/24
Factory rear bumpers are a thin skin riveted to a heavy ball mount
IF THE IMAGE IS TOO SMALL, click...
 Chrome.jpg
1843 hits | 147.05 KB | Posted: 4/25/15
All it takes to polish clean chrome is clean 0000 steel wool & elbow grease.
[url=https://www.super...
 BumperR-Twist.jpg
273 hits | 75.08 KB | Posted: 1/26/22
Rear Bumper Straightening
IF THE IMAGE IS TOO SMALL, click it.
It's very common for the rear bumper...
 BumperBolt.jpg
113 hits | 104.48 KB | Posted: 2/17/24
Rear Bumper Outboard Bolt Removal
IF THE IMAGE IS TOO SMALL, click it.
Because of grime & salt thro...
 ReverseLEDs.jpg
208 hits | 70.83 KB | Posted: 2/16/24
Floodlights are easy to add since the stock rear bumper has 2 holes perfectly positioned already, an...
 HitchKiller.jpg
727 hits | 87.7 KB | Posted: 3/15/19
Do you see the problem? A high-school friend of mine was killed exactly this way.
When the draw ba...
 JackLR.JPG
4396 hits | 65.11 KB | Posted: 8/22/09
Land Rover Bottle Jack used in Discovery, Discovery Series II, & pre-'03 Range Rover (Classic & New)...
 SpareSlideout88.JPG
3937 hits | 106.04 KB | Posted: 12/12/11
"Tire Tuk" Spare Slideout Tray '88 F150
I've never seen this aftermarket spare tray before. Only t...
 SlottingChisel.jpg
1245 hits | 59.19 KB | Posted: 6/2/18
Slotting chisel in an air hammer is the quickest way to cut sheet metal, with virtually no sparks.
I...
 SwingawayType1.JPG
5242 hits | 70.67 KB | Posted: 9/19/07
Swingaway Spare Tire Carrier, Type 1
[url=https://www.supermotors.net/vehicles/registry/media/692940...
 SwBrkts80-86.JPG
4393 hits | 55.91 KB | Posted: 12/8/06
Type 1 ('80-86) Swingaway Brackets have sharply angled straight corners to match the older body. '8...
 SwingawaySwap.JPG
3056 hits | 65.79 KB | Posted: 4/27/09
Someone suggested that the curved body brackets of Type 2 & 3 swingaways wouldn't fit an '80-86 body...
 SwingawaySleeve3.jpg
149 hits | 34.54 KB | Posted: 2/16/24
The strike sleeve for a Type 3 swingaway can be re-used even after being worn through.
IF THE IMAGE ...
 SwingStrikeSleeve90-96.jpg
274 hits | 40.88 KB | Posted: 1/29/22
Type 3 Swingaway Strike Sleeve Dimensions
IF THE IMAGE IS TOO SMALL, click it.
At the upload date, ...
 SwingawayType2.JPG
4714 hits | 68.93 KB | Posted: 7/23/07
Type 1 ('78~86) has a 2-screw notched strike for a teter-bar catch, a J-bolt mount, an UNreinforced ...
 SwingawayBolt.jpg
1667 hits | 116.8 KB | Posted: 8/12/14
Swingaway Bolts for '78-96 Broncos
[url=https://www.supermotors.net/registry/media/1168824][img]htt...
 SwingXtract.jpg
357 hits | 68.2 KB | Posted: 2/26/22
Swingaway Bolt Extraction
IF THE IMAGE IS TOO SMALL, click it.
These bolts are notorious for breaki...
 Tether.JPG
4185 hits | 43.98 KB | Posted: 11/14/09
Swingaway Tether prevents quarter panel damage if the tire carrier is unlatched while driving, but d...
 SwingawayNutPlatePU3.jpg
137 hits | 61.58 KB | Posted: 2/16/24
'78-96 Bronco Swingaway Nut Plate will fit F-series
IF THE IMAGE IS TOO SMALL, click it.
 SwingawayNutPlatePU4.jpg
139 hits | 72.21 KB | Posted: 2/16/24
'78-96 Bronco Swingaway Nut Plate will fit F-series
IF THE IMAGE IS TOO SMALL, click it.
 TireCoverEB.JPG
1900 hits | 90 KB | Posted: 10/17/12
Tire Cover (F6TZ9845026AAA) construction
IF THE IMAGE IS TOO SMALL, click it.
F1TZ-9845026-CAG - Sp...
 SwingawayPad.jpg
217 hits | 53.54 KB | Posted: 8/3/22
Swingaway Pad
IF THE IMAGE IS TOO SMALL, click it.
The factory paint-protector pad is self-adhesive...
 TireDate.jpg
160 hits | 59.6 KB | Posted: 2/18/24
Tire Date Code
IF THE IMAGE IS TOO SMALL, click it.
Tires are dated because they age when expose...
 SnugLug.JPG
2637 hits | 62.64 KB | Posted: 4/27/09
I could have installed this lug wrench carrier & tire lock (whose cover I had powdercoated at the sa...
 SpareIn96XL.JPG
3502 hits | 66.71 KB | Posted: 12/2/09
Interior Spare Mount Bracket
Tire mounting hardware missing
[url=https://www.supermotors.net/vehic...
 CenterCapCtr.jpg
306 hits | 49.86 KB | Posted: 8/3/22
Original Metal Center Caps can be restored by polishing the chrome with 0000 steel wool, but if the ...
 CenterCapAnchors.jpg
1011 hits | 37.63 KB | Posted: 8/7/16
Anchors for '83-96 Aluminum & alloy wheel center cap screws
 WheelArchMldg.jpg
114 hits | 61.94 KB | Posted: 2/17/24
'94-97 Wheel Arch Moulding Trim
IF THE IMAGE IS TOO SMALL, click it.
Earlier wheel arch mouldings w...
 RunningBoardsEarly.jpg
132 hits | 48.7 KB | Posted: 2/17/24
Early Dealer-Option Running Board Kit
IF THE IMAGE IS TOO SMALL, click it.
 PickupSlidingRWdo.jpg
239 hits | 40.79 KB | Posted: 1/29/22
Rare Aftermarket Power Sliding Window for '80-96 F-series
IF THE IMAGE IS TOO SMALL, click it.
 Hook80-91.JPG
1927 hits | 48.95 KB | Posted: 7/12/12
Common aftermarket hooks are similar to (rare) stock '80-91 hooks, but the bolt hole spacing does NO...
 Visemount.JPG
2004 hits | 103.19 KB | Posted: 11/29/12
This vise has been in my way for a couple of years - now I can get some use out of it.
[url=https:/...
 StepSlide80.jpg
570 hits | 45.7 KB | Posted: 8/29/19
Automatic Step for '80-86 F-series/Bronco, also fits '87-96 (& '97 >8500GVWR)
IF THE IMAGE IS TOO SM...
 20200709_141324.jpg
352 hits | 63.96 KB | Posted: 7/11/20
This TowSafe hitch has grenaded. The ball is still captive, but it rattles. The needle's spring is v...
 TcaseChainGM.jpg
425 hits | 42.78 KB | Posted: 8/2/20
What's that noise? Could it be the transfer case chain? No, it looks fine.
 ChromePol.jpg
192 hits | 59.76 KB | Posted: 3/3/24
Chrome Polishing
IF THE IMAGE IS TOO SMALL, click it.
This can be done dry, but removing as much...
 GloveBox86s.jpg
20 hits | 48.23 KB | Posted: 9/16/24
'85-86 Glove Box details
IF THE IMAGE IS TOO SMALL, click it.
Both years got an improved plastic...
 20230923_144936 NotMuch.mp4
0 hits | 21.96 MB | Posted: 11/13/24
It doesn't take much to get one running.
I bought this '93 EB Bronco missing its battery, steering ...
|
|
General Purpose Pics