Using this seal & bearing driver is one way to remove the '93-96 Bronco-only 4WABS tone ring. Another way is: after hammering the lugs out (but not so far as to damage the tone ring), drop the rotor onto a wood support tall enough to allow the hub to slide down and out of the tone ring. DO NOT allow the thin outer lip of the hub to impact any hard surface. Pad the pavement with plywood or several layers of cardboard, as this page shows:
![toneringremoval.jpg Using this seal & bearing driver is one way to remove the '93-96 Bronco-only 4WABS tone ring. Another way is: after hammering the lugs out (but not so far as to damage the tone ring), drop the rotor onto a wood support tall enough to allow the hub to slide down and out of the tone ring. DO NOT allow the thin outer lip of the hub to impact any hard surface. Pad the pavement with plywood or several layers of cardboard, as this page shows:
[url=https://www.supermotors.net/registry/media/1170475][img]https://www.supermotors.net/getfile/1170475/thumbnail/rotorrmv4wabs.jpg[/img][/url]](https://www.supermotors.net/getfile/1039294/fullsize/toneringremoval.jpg)