IMGP0004.JPG
648 hits | 115.8 KB | Posted: 9/30/12
these are the hardparts of the discontinued T19-0085-08 passive radiator and the new foams, SWK4B & ...

IMGP0005.JPG
444 hits | 117.27 KB | Posted: 9/30/12
i was afraid that the adhesive that comes with the foams might not stick to the plastic parts, and t...

IMGP0006.JPG
467 hits | 118.6 KB | Posted: 9/30/12
the center cone with a foam attached to the bottom side, & the basket with a foam attached to the fr...

IMGP0007.JPG
484 hits | 115.14 KB | Posted: 9/30/12
now the center cone front side foam attached to the basket front side foam. the ring in the pic abov...

IMGP0009.JPG
409 hits | 122.04 KB | Posted: 9/30/12
back side foams both installed with the ring sandwiched in the middle. torn silver stuff is decorati...

IMGP0010.JPG
852 hits | 110.81 KB | Posted: 9/30/12
rebuilt passive radiator & driver installed into the housing

IMGP0011.JPG
428 hits | 111.14 KB | Posted: 9/30/12
housing halves closed up & ready to replace back panel

IMGP0012.JPG
397 hits | 103.03 KB | Posted: 9/30/12
back panel with my mounting bracket all buttoned up

IMGP0013.JPG
553 hits | 121.44 KB | Posted: 9/30/12
ready to re-install into the car & rock on. plan is to watch the settings for the levels and minimiz...