100_2186.jpg
308 hits | 66.5 KB | Posted: 11/18/06
left wheels

100_2191.jpg
295 hits | 65.99 KB | Posted: 11/18/06
right rear of trailer

100_2193.jpg
300 hits | 64.46 KB | Posted: 11/18/06
right side wheels

100_2195.jpg
297 hits | 59 KB | Posted: 11/18/06
stop rail on front of deck

100_2196.jpg
308 hits | 63.92 KB | Posted: 11/18/06
stop rail on front of deck. Made from 2" SCH40 pipe with a 2 3/8" outer diameter. The ends were cap...

100_2197.jpg
379 hits | 57.17 KB | Posted: 11/18/06
the tounge. Notice the heavy 10" I-beam framed formed in to the tounge, then welded right to the adj...

100_2198.jpg
293 hits | 56.23 KB | Posted: 11/18/06
right side of trailer, looking back from front

100_2199.jpg
308 hits | 66.14 KB | Posted: 11/18/06
left rear corner of trailer

100_2201.jpg
294 hits | 59.49 KB | Posted: 11/18/06
left rear corner with rear support jack locking handle pulled out in to "unlocked" position

100_2202.jpg
299 hits | 56.84 KB | Posted: 11/18/06
both ramps stored in rear of trailer, under deck.
The big 10" I-beam frame hides the ramps completl...

100_2203.jpg
311 hits | 60.39 KB | Posted: 11/18/06
ramps pulled out, ready to hook on to deck

100_2204.jpg
253 hits | 69.62 KB | Posted: 11/18/06
ramp hooked on to rear ramp rail of trailer. This rail will allow the ramps to be hooked on to any p...

100_2205.jpg
351 hits | 44.23 KB | Posted: 11/18/06
ramps

100_2207.jpg
341 hits | 57.48 KB | Posted: 11/18/06
ramp cradle under trailer deck

100_2209.jpg
401 hits | 51.52 KB | Posted: 11/18/06
both right and left rear support jacks. These will take all the strain off the tow vehicle, hitch, a...

100_2210.jpg
294 hits | 62.04 KB | Posted: 11/18/06
rear support jack in the stowed position, locked in place

100_2211.jpg
295 hits | 53.9 KB | Posted: 11/18/06
rear support jack in the stowed position, locked in place

100_2212.jpg
336 hits | 67.27 KB | Posted: 11/18/06
A pull of the rear support jack's release handle will pull the 1.25" pin on the jack, and allow the ...

100_2213.jpg
260 hits | 61.38 KB | Posted: 11/18/06
rear support jack dropped down in to position

100_2214.jpg
305 hits | 63.12 KB | Posted: 11/18/06
rear support jack down in position, with "drop leg" up inside jack

100_2215.jpg
310 hits | 57.47 KB | Posted: 11/18/06
An easy pull of this handle will drop the "drop leg" down to the ground. Releasing the handle will l...

100_2216.jpg
281 hits | 54.9 KB | Posted: 11/18/06
rear support jack's "drop leg" dropped down to ground

100_2217.jpg
295 hits | 53.56 KB | Posted: 11/18/06
rear support jack dropped to ground, and locked in place.
There is a locking position every 7/8 of ...

100_2219.jpg
286 hits | 52.27 KB | Posted: 11/18/06
rear support jack's "drop leg" locking mechanism. These work so smoothly, I'm really proud of them

100_2220.jpg
305 hits | 57.71 KB | Posted: 11/18/06
rear support jack dropped down to the ground, and locked in place

100_2221.jpg
253 hits | 52.5 KB | Posted: 11/18/06
rear support jack dropped down to the ground, and locked in place

100_2222.jpg
263 hits | 63.26 KB | Posted: 11/18/06
Rear support jack release locking handle in the locked position

100_2223.jpg
300 hits | 59.94 KB | Posted: 11/18/06
Rear support jack release locking handle pulled out to the "unlocked" position

100_2224.jpg
291 hits | 59.94 KB | Posted: 11/18/06
Inside view of the rear support jack release locking handle

100_2225.jpg
284 hits | 58.5 KB | Posted: 11/18/06
These flames don't serve any purpose other than to look cool. I cut them out of 1/4" steel plate, an...

100_2229.jpg
334 hits | 61.39 KB | Posted: 11/18/06
Bulldog 12,000 pound jack, bolted (not welded) to 8" C-channel crossmember in tounge

100_2231.jpg
326 hits | 48.32 KB | Posted: 11/18/06
underneath trailer from front. Here you can see the 10" I-beam frame and crossmembers, and all the 3...

100_2232.jpg
389 hits | 51.17 KB | Posted: 11/18/06
Spare tire cradel. Made from 3" C-channnel, and in a "Y" shape to allow easier reomval of tire. Hand...

100_2233.jpg
326 hits | 72.25 KB | Posted: 11/18/06
spare tire mounts on crossmember at front of trailer. Frame is tall enoufgh to have tire completly h...

100_2234.jpg
377 hits | 61.52 KB | Posted: 11/18/06
Break-away trailer brake activator will apply trailer brakes even after tow vehicle plug has been di...

100_2236.jpg
291 hits | 62.52 KB | Posted: 11/18/06
all the factory lights, also included with trailer

100_2237.jpg
337 hits | 62.59 KB | Posted: 11/18/06
side steak pockets.
There is also a 3/4" cold rolled pin welded inside each steal pocket. This serv...

100_2238.jpg
358 hits | 59.04 KB | Posted: 11/18/06
Center tie-downs.
There is a 3/4" cold rolled pin inside each pocket as a place to hook a rachet st...

100_2239.jpg
304 hits | 68.44 KB | Posted: 11/18/06
center tie-downs
(wiring is temporary brake light wiring)

100_2240.jpg
306 hits | 68.58 KB | Posted: 11/18/06
Springs for the rear support jacks and locking pin.
These go with trailer

100_2241.jpg
283 hits | 49.3 KB | Posted: 11/18/06
These go with trailer.
I had these bent out of 1/4" plate to be cut to fit and welded in to the co...

100_0718.JPG
380 hits | 55.09 KB | Posted: 11/18/06
Spare tire cradle made to hang from these three mounts. They are made from 1/2" steel plate, and wel...

100_0771_0001.JPG
353 hits | 62.72 KB | Posted: 11/18/06
Original factory fender trim removed.
They had it installed slightly off center of the tires, so it...

100_0308.jpg
360 hits | 49.37 KB | Posted: 11/18/06
Also included is $380 worth of POR-15 paint.
There is one gallon of POR-15 rust prevenative paint, ...