IMG_8078[1].jpg
565 hits | 55.55 KB | Posted: 11/4/07

IMG_8079[1].jpg
579 hits | 50.85 KB | Posted: 11/4/07

IMG_8138[1].jpg
578 hits | 38.84 KB | Posted: 11/19/07
I used the old thin-gauge aluminum mockup panel as a template and traced the holes and outline onto ...

IMG_8135[1].jpg
559 hits | 54.76 KB | Posted: 11/19/07
And here's a front view. I used 180 grit on the DA sander to burnish the surface a little, and I'm ...

IMG_8251[1].jpg
581 hits | 82.2 KB | Posted: 11/27/07

IMG_8252[1].jpg
567 hits | 69.69 KB | Posted: 11/27/07

IMG_8253[1].jpg
564 hits | 67.88 KB | Posted: 11/27/07

IMG_8255[1].jpg
551 hits | 56.49 KB | Posted: 11/27/07

IMG_8256[1].jpg
508 hits | 45.21 KB | Posted: 11/27/07

IMG_8257[1].jpg
797 hits | 38 KB | Posted: 11/27/07

IMG_8258[1].jpg
770 hits | 68.95 KB | Posted: 11/27/07