Engine1.jpg
285 hits | 57.73 KB | Posted: 9/18/07
After only 10,000 miles, this roller cam conversion 'spider' didn't make it.

Engine4.jpg
220 hits | 32.15 KB | Posted: 9/18/07
This allowed the rollers to spin in its bore - you can see the build up of metal on the side of the ...

Engine5.jpg
272 hits | 44.83 KB | Posted: 9/18/07
This also gouged the lobes on the cam.

Engine2.jpg
275 hits | 41.49 KB | Posted: 9/18/07
This is the 3rd dist gear that got chewed up - lesson here: use a steel gear with a roller cam no ma...

Engine3.jpg
312 hits | 49.09 KB | Posted: 9/18/07
The gear on the cam is worn as well.

Engine6.jpg
358 hits | 47.68 KB | Posted: 9/18/07
This is what happens when you don't use hardened pushrods with guideplates.

Engine7.jpg
378 hits | 77.69 KB | Posted: 9/18/07
Almost done - new cam, lifters, pushrods.

Engine8.jpg
330 hits | 75.94 KB | Posted: 9/18/07

Engine9.jpg
302 hits | 76.09 KB | Posted: 9/18/07

Engine10.jpg
379 hits | 74.33 KB | Posted: 9/18/07

Engine11.jpg
347 hits | 94.85 KB | Posted: 9/18/07
Going back in the truck.