IMG00071.jpg
1085 hits | 58.2 KB | Posted: 10/9/08
Tailgate with access panel removed.

IMG00072.jpg
602 hits | 28.85 KB | Posted: 10/9/08
As you can see the originals are worn down and rusted.

IMG00082.jpg
995 hits | 54.11 KB | Posted: 10/9/08
This is the part purchased from Shucks Auto Supply. 74402 Dorman Universal Window Roller.

IMG00073.jpg
655 hits | 52.28 KB | Posted: 10/9/08
The difficulty of the passenger side is there is no way to remove the cross beam.

IMG00074.jpg
949 hits | 58.86 KB | Posted: 10/9/08
I used a Dremel since I dont own a cutoff tool. So this and a drill to drill out the rivets.

IMG00076.jpg
923 hits | 38.9 KB | Posted: 10/9/08
Successfully removing the top of the old roller in order to drill it out.

IMG00078.jpg
1013 hits | 50.04 KB | Posted: 10/9/08
The window track removed from the window and the new roller put into its track. Not necessary to rem...

IMG00075.jpg
1021 hits | 51.7 KB | Posted: 10/9/08
Before you start remove the driver side beam by removing the small phillips screw. Makes it easier t...

IMG00079.jpg
912 hits | 38.71 KB | Posted: 10/9/08
As you can see the passenger side is a complete pain in the ass to get to.

IMG00080.jpg
884 hits | 46.53 KB | Posted: 10/9/08
As you can see the passenger is not even visible because of the non removable cross beam support.

IMG00081.jpg
890 hits | 32.89 KB | Posted: 10/9/08
So I did the unthinkable and made a little access panel to get to the passenger roller with my dreme...