DSC00175.jpg
1628 hits | 25.58 KB | Posted: 6/29/03
Here is the stock 86 F150 power window wiring I used after I drilled the door and cowl. it fit very ...

DSC00176.jpg
1062 hits | 20.21 KB | Posted: 6/29/03
Here is another shot of the 86 F150 wiring. it actually fit very nicely and looks original.

DSC00177.jpg
1436 hits | 29.85 KB | Posted: 6/29/03
The stock regulator still installed.

DSC00178.jpg
1370 hits | 24.75 KB | Posted: 6/29/03
Here is the stock regulator next to the 86 F150 regulator. Originally, I was going to shorten the ne...

DSC00179.jpg
1112 hits | 56.65 KB | Posted: 4/13/05
The roller turned out to be the only modification I needed to make. The square roller is an odd one ...

DSC00180.jpg
1116 hits | 34.76 KB | Posted: 6/29/03
Here is a side view of the rollers. I am not sure if you can tell but I have already modified the on...

DSC00181.jpg
1164 hits | 38.91 KB | Posted: 6/29/03
Here are the clips I used to mount the regulator. I put 4 of these on each regulator. I did not use ...

DSC00183.jpg
1094 hits | 32.7 KB | Posted: 6/29/03
Here is the clip installed. It works better if you enlarge the holes slightly so the clips lock in p...

DSC00184.jpg
1339 hits | 31.07 KB | Posted: 6/29/03
Here is the regulator mounted. You can see the 4 bolts. I had to use .220 thick spacers between thre...

DSC00187.jpg
1458 hits | 57.14 KB | Posted: 6/29/03
Here is a shot inside the door looking up. You can see the washers and there is plenty of room aroun...