100_3204.JPG 477 hits | 74.26 KB | Posted: 10/16/09 Old engine, new engine, and the truck it's going into.
100_3206.JPG 489 hits | 53.44 KB | Posted: 10/16/09 The new engine didn't have air conditioning, and my old engine is a V-belt, the new one is serpentin...
100_3227.JPG 454 hits | 45.59 KB | Posted: 10/16/09 I still need to clearance for the fitting but at least I can mount it flush now.
100_3224.JPG 454 hits | 86.89 KB | Posted: 10/16/09 So far everything looks good. Tightened the head bolts for the turbo and replacing the valve cover ...
100_3243.JPG 449 hits | 63.83 KB | Posted: 11/15/09 My new glow plugs arrived!
100_3246.JPG 403 hits | 51.26 KB | Posted: 11/15/09 Somebody lacked the conviction to see that workday all the way through.
100_3247.JPG 437 hits | 73.04 KB | Posted: 11/15/09 Got the wiring harness in and most of the fuel return lines ran.
100_3288.JPG 488 hits | 65.64 KB | Posted: 11/15/09 The backing plate I made to seal the hole for the old CDR hole. I had a plate that fit in the hole ...
100_3296.JPG 415 hits | 62.71 KB | Posted: 11/15/09 Got the turbo pipes wrapped. Unfortunately, I was unable to install the engine and the turbo and wi...
100_3299.JPG 370 hits | 64.53 KB | Posted: 11/15/09 Fittings to run the oil from the block up to the turbo.
100_3298.JPG 405 hits | 70.03 KB | Posted: 11/15/09 The line coming up the back of the block. I used one of the metal fuel lines for this. It worked g...
100_3319.JPG 420 hits | 55.23 KB | Posted: 11/15/09 The T-fitting for the oil pressure sending unit and the supply to the turbo.
100_3323.JPG 457 hits | 69.44 KB | Posted: 11/15/09 This was another bracket I had to make that came with the kit originally. I hooked up my factory se...
100_3303.JPG 423 hits | 78.8 KB | Posted: 11/15/09 With the turbo mounted.
100_3316.JPG 356 hits | 66.37 KB | Posted: 11/15/09 Bracket I made for the glow plug solenoid. Again, originally came with the kit, but not when I got ...
100_3328.JPG 434 hits | 67.37 KB | Posted: 11/15/09 Some fittings I used to relocate where the mechanical oil pressure line attaches. Since it's plasti...
100_3340.JPG 382 hits | 53.15 KB | Posted: 11/15/09 This is me trying to line up the back of the engine and the transmission.
100_3342.JPG 419 hits | 66.12 KB | Posted: 11/15/09 After getting the engine in and bolted to the transmission I realized that the brackets that the eng...
100_3352.JPG 468 hits | 86.91 KB | Posted: 11/15/09 The tranny linkage arm that had to be 'adjusted' to fit around the turbo pipes. Notice the cracks t...
100_3354.JPG 434 hits | 85.41 KB | Posted: 11/15/09 You can kinda see where I welded it up to give it some strength.
100_3358.JPG 462 hits | 63.85 KB | Posted: 11/15/09 Getting the front clip back on.
100_3361.JPG 436 hits | 36.48 KB | Posted: 11/15/09 The gauges I installed to keep track of things.
New Engine
