the jag2.JPG
1630 hits | 68.04 KB | Posted: 8/10/09

1987 XJ-6 in Dorchester Grey shortly after purchase 7/21/07
000_1937.jpg
897 hits | 50.44 KB | Posted: 6/2/10

right rear quarter
000_1938.jpg
778 hits | 52.62 KB | Posted: 6/2/10

left rear
000_1932.jpg
815 hits | 55.74 KB | Posted: 6/2/10

Dash when first acquired
000_1929.jpg
826 hits | 60.63 KB | Posted: 6/2/10

Shifter surround peeling wood before repairs
PICT0026.JPG
1233 hits | 95.62 KB | Posted: 6/2/10

After re-gluing the peeling wood and refinishing with Helmsman Spar Urethane gloss. Very tedious pro...
000_1933.jpg
775 hits | 31.6 KB | Posted: 6/2/10

Driver seat wear
000_1934.jpg
1607 hits | 39.74 KB | Posted: 6/2/10

right front door panel
black nardi.jpg
884 hits | 59.25 KB | Posted: 3/3/10

Black Nardi in Series III XJ6
19000 mile eBay Jag.JPG
853 hits | 43.82 KB | Posted: 3/3/10

Black Nardi on low mileage Jag
2489162_8_full.jpg
806 hits | 56.62 KB | Posted: 3/3/10

Nardi wheel
nardi jag button.jpg
1016 hits | 112.71 KB | Posted: 3/3/10

Nardi with Jag button
nardi ebay seller rima-beach-wear.JPG
1053 hits | 77.75 KB | Posted: 3/3/10

Nardi with hub
PICT0033.JPG
920 hits | 89.49 KB | Posted: 6/2/10

New fuel hoses in trunk
Gates fuel injection rated hose from Carquest
PICT0012.JPG
757 hits | 78.16 KB | Posted: 6/2/10

new PBR brake rotors, previous owner replaced calipers and pads but not rotors
PICT0015.JPG
841 hits | 83.22 KB | Posted: 6/2/10

under car parking brake cable shield was missing, replaced and sprayed with truck bed liner
PICT0016.JPG
743 hits | 70.65 KB | Posted: 6/2/10

Replaced rear brake line that was all bent from hitting something apparently. The new green line is ...
PICT0017.JPG
811 hits | 73.12 KB | Posted: 6/2/10

New brake line looks way better.
PICT0019.JPG
847 hits | 107.07 KB | Posted: 6/2/10

Cleaned spark plug wires and valley between cam covers.
PICT0021.JPG
758 hits | 63.04 KB | Posted: 6/2/10

Replaced a bunch of broken clips holding the fuel line.
PICT0022.JPG
855 hits | 75.93 KB | Posted: 6/2/10

Fuel line clips were replaced by 1/4" diameter cable clamps from Home Depot.
PICT0024.JPG
881 hits | 73.43 KB | Posted: 6/2/10

Upper corner of the hood was rusting from battery acid, cleaned and refinished with Dupli-Color whee...
PICT0025.JPG
917 hits | 85.26 KB | Posted: 6/2/10

Took out battery tray, removed rust and refinished with truck bed liner from aerosol can. Silicone s...
PICT0031.JPG
1261 hits | 69.96 KB | Posted: 6/2/10

Looking up from passenger side footwell, the square cuts in the sound deadener panel were made for a...
XJ6 fuel vent line.JPG
1065 hits | 17.98 KB | Posted: 5/15/10

Tappet guide stakedown kit.JPG
2028 hits | 86.48 KB | Posted: 7/27/09

Tappet guide stakedown kit keeps the tappet guide from coming out.
Evap system.jpg
1612 hits | 59.55 KB | Posted: 5/15/10

Sensor ID.jpg
1137 hits | 79.69 KB | Posted: 6/3/10

Jag fueling control.GIF
1308 hits | 27.91 KB | Posted: 6/3/10

1219001415.jpg
1408 hits | 16.2 KB | Posted: 3/2/11

Glyco cam bearings for Jaguar.
1216001816.jpg
1502 hits | 27.44 KB | Posted: 3/2/11

Cam cover removed on exhaust camto install tappet guide hold down kit.
1216001816a.jpg
1372 hits | 25.58 KB | Posted: 3/2/11

Exhaust cam removed, hold down kit installed.
1216001819.jpg
1449 hits | 20.66 KB | Posted: 3/2/11

Removing lower half of cam bearing with pick tool.
1216001821.jpg
1417 hits | 19.97 KB | Posted: 3/2/11

off comes the cam bearing shell.

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog