IMG_0193.JPG
1035 hits | 78.18 KB | Posted: 1/20/11

Low mileage but original 82 318 4bbl engine needs timing chain
IMG_0194.JPG
742 hits | 55.89 KB | Posted: 1/20/11

Possibly original 30 year old bypass hose just waiting to strand me at the side of the road.
IMG_0254.JPG
801 hits | 37.82 KB | Posted: 1/20/11

Silicone lined Mopar bypass hose will probably outlast several cars, to replace original.
IMG_0203.JPG
762 hits | 75.42 KB | Posted: 1/20/11

Halfway torn down, with all the belt driven accessories off it. Dirty enough for you ? Well just fea...
IMG_0208.JPG
758 hits | 79.53 KB | Posted: 1/20/11

Taking the crank bolt out of the balancer with the visegrips holding against the two foot bar.
IMG_0216.JPG
921 hits | 94.71 KB | Posted: 1/20/11

Just look at that slacker of a chain, with it's plastic cam gear still in reasonable shape. At least...
IMG_0241.JPG
807 hits | 62.45 KB | Posted: 1/20/11

Double row police/HD chain and steel gears comes with all gaskets AND....
IMG_0245.JPG
687 hits | 46.87 KB | Posted: 1/20/11

balancer snout repair sleeve. At almost 30 years old the balancer is bound to have a groove worn int...
IMG_0285.JPG
730 hits | 59.92 KB | Posted: 1/20/11

See that groove filled with paint, just below the repair sleeve ? Put back, without the sleeve it wi...
IMG_0286.JPG
673 hits | 67.68 KB | Posted: 1/20/11

Pound new repair sleeve onto balancer snout AND......
IMG_0287.JPG
661 hits | 58.04 KB | Posted: 1/20/11

Smooth, repaired snout surface for your new TC seal to seal against.
IMG_0292.JPG
690 hits | 63.61 KB | Posted: 1/20/11

Some people like the felt oil arrester to seat against their oil slinger others don't.
IMG_0281.JPG
697 hits | 51.55 KB | Posted: 1/20/11

Spend the time to clean and paint the balancer and paint in the timing marks.
IMG_0279.JPG
693 hits | 38.49 KB | Posted: 1/20/11

Get the timing chain cover too.
IMG_0237.JPG
737 hits | 44.08 KB | Posted: 1/20/11

A tip when re-installing the TC cover is glue the little oil pan cork corner gaskets onto the TC cov...
IMG_0271.JPG
720 hits | 79.2 KB | Posted: 1/20/11

Double row chain in place, with MP chain tensioner. See the folder marked MP chain tensioner for ins...
IMG_0299.JPG
755 hits | 76.27 KB | Posted: 1/20/11

Going back together. While I was there I replaced the water pump which is cheap but hard to get to l...
IMG_0306.JPG
740 hits | 66.68 KB | Posted: 1/20/11

Same story on the fuel pump.
IMG_0258.JPG
891 hits | 65.19 KB | Posted: 1/20/11

Cleaned off all the scunge and painted what I could reach with 70s Chrysler engine blue.
IMG_0293.JPG
774 hits | 70.12 KB | Posted: 1/20/11

I like to clean out the threaded holes by chasing them with a top in the speedy ratcheting tap handl...
IMG_0309.JPG
624 hits | 74.62 KB | Posted: 1/20/11

It may only look marginally better, but it runs incredibly smoother. Just about anything rubber got ...

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2025 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog