Steve83 > 1995 Ford F-150 > open folder Junker

What a beauty! All those used tires in the bed WERE in the cab a few minutes ago. Yes, the back wi...
Hits: 2992
Size: 92.79 KB
Posted: 2/11/11
What a beauty! All those used tires in the bed WERE in the cab a few minutes ago. Yes, the back wi...		It was abused & neglected, and driven on 1 tank for a while. When that one died, it was abandoned f...
Hits: 2200
Size: 109.87 KB
Posted: 2/11/11
It was abused & neglected, and driven on 1 tank for a while. When that one died, it was abandoned f...		2 tires off the rims; 2 dead gas tanks; 2 bent bumpers; 2 missing window cranks; 2 undamaged pieces ...
Hits: 2869
Size: 101.97 KB
Posted: 2/11/11
2 tires off the rims; 2 dead gas tanks; 2 bent bumpers; 2 missing window cranks; 2 undamaged pieces ...		Both doors will be replaced, the RHF fender, both bumpers, and the valance between the grille & bump...
Hits: 2457
Size: 110.29 KB
Posted: 2/11/11
Both doors will be replaced, the RHF fender, both bumpers, and the valance between the grille & bump...		The bumper is pretty rough, but I'm gonna straighten it.
Hits: 1984
Size: 76.32 KB
Posted: 2/11/11
The bumper is pretty rough, but I'm gonna straighten it.
A squirrell wintered under the seat - he's been getting in & out through the dislodged shifter cable...
Hits: 2070
Size: 95.41 KB
Posted: 2/11/11
A squirrell wintered under the seat - he's been getting in & out through the dislodged shifter cable...		It looks like birds were roosting on the dash & crapping on the column due to the broken rear window...
Hits: 2055
Size: 89.21 KB
Posted: 2/11/11
It looks like birds were roosting on the dash & crapping on the column due to the broken rear window...		Safety Certification label in driver's door jamb above door latch strike (VIN edited) [url=https://...
Hits: 2019
Size: 71.76 KB
Posted: 2/11/11
Safety Certification label in driver's door jamb above door latch strike (VIN edited) [url=https://...		Calibration label in driver's door jamb
Hits: 1891
Size: 73.84 KB
Posted: 2/11/11
Calibration label in driver's door jamb		EEC calibration code sticker in driver's door jamb Some trucks have this - others don't. Coincid...
Hits: 2057
Size: 72.94 KB
Posted: 2/11/11
EEC calibration code sticker in driver's door jamb Some trucks have this - others don't. Coincid...
VECI Label under hood above master cylinder [url=https://www.supermotors.net/registry/media/858380]...
Hits: 4222
Size: 85.86 KB
Posted: 2/11/11
VECI Label under hood above master cylinder [url=https://www.supermotors.net/registry/media/858380]...		4.9L FEAD belt routing sticker on core support
Hits: 2181
Size: 92.67 KB
Posted: 2/11/11
4.9L FEAD belt routing sticker on core support		Refrigerant label on core support
Hits: 1813
Size: 78.38 KB
Posted: 2/11/11
Refrigerant label on core support		Jacking Instructions sticker on core support [url=https://www.supermotors.net/registry/media/831119...
Hits: 3027
Size: 81.11 KB
Posted: 2/11/11
Jacking Instructions sticker on core support [url=https://www.supermotors.net/registry/media/831119...		Inertia Fuel Shutoff (IFS) switch sticker on core support
Hits: 1731
Size: 89.46 KB
Posted: 2/11/11
Inertia Fuel Shutoff (IFS) switch sticker on core support
The previous owner got as far as bending a tie-rod by hooking a tow chain there, connecting a fuel p...
Hits: 1790
Size: 93.73 KB
Posted: 2/11/11
The previous owner got as far as bending a tie-rod by hooking a tow chain there, connecting a fuel p...		[url=https://www.supermotors.net/registry/media/825935][img]https://www.supermotors.net/getfile/8259...
Hits: 2067
Size: 100.61 KB
Posted: 2/11/11
[url=https://www.supermotors.net/registry/media/825935][img]https://www.supermotors.net/getfile/8259...		The #4 plug wire is off to see that it's sparking. [url=https://www.supermotors.net/registry/media/...
Hits: 1749
Size: 97.95 KB
Posted: 2/11/11
The #4 plug wire is off to see that it's sparking. [url=https://www.supermotors.net/registry/media/...		95A 3G alternator. Note the 4 holes between each pair of front ribs, and that it's attached using t...
Hits: 1678
Size: 90.88 KB
Posted: 2/11/11
95A 3G alternator. Note the 4 holes between each pair of front ribs, and that it's attached using t...		Craptasmic battery, STONE-dead. Terminals destroyed. [url=https://www.supermotors.net/registry/274...
Hits: 1718
Size: 85.81 KB
Posted: 2/11/11
Craptasmic battery, STONE-dead. Terminals destroyed. [url=https://www.supermotors.net/registry/274...
The guy who had it before me used his 4WD tractor to drag it around his yard by the tie rod. [url=h...
Hits: 1910
Size: 104.52 KB
Posted: 2/13/11
The guy who had it before me used his 4WD tractor to drag it around his yard by the tie rod. [url=h...		I didn't realize it was bent badly enough to dig the adjuster bolt into the sidewall, blowing out th...
Hits: 2167
Size: 91.17 KB
Posted: 2/13/11
I didn't realize it was bent badly enough to dig the adjuster bolt into the sidewall, blowing out th...		What a... [url=https://www.supermotors.net/registry/media/440042][img]https://www.supermotors.net/g...
Hits: 1748
Size: 96.93 KB
Posted: 2/13/11
What a... [url=https://www.supermotors.net/registry/media/440042][img]https://www.supermotors.net/g...		Amazing what you can do with a 12# sledge... Coincidentally, that same sledge was necessary to remo...
Hits: 1718
Size: 90.54 KB
Posted: 2/13/11
Amazing what you can do with a 12# sledge... Coincidentally, that same sledge was necessary to remo...		With some creativity (plus 2 fire extinguishers, 2 gallon jugs of water, and a hose nearby), I creat...
Hits: 3270
Size: 95.8 KB
Posted: 2/13/11
With some creativity (plus 2 fire extinguishers, 2 gallon jugs of water, and a hose nearby), I creat...
Temporary fuel system includes fire extinguishers, water jugs, & a garden hose. [url=https://www.su...
Hits: 618
Size: 103.91 KB
Posted: 4/26/18
Temporary fuel system includes fire extinguishers, water jugs, & a garden hose. [url=https://www.su...		I added a low fuel light, just to see how it went in a non-tach cluster. It was a little easier sin...
Hits: 1979
Size: 70.54 KB
Posted: 2/20/11
I added a low fuel light, just to see how it went in a non-tach cluster. It was a little easier sin...		To lift the bed, loosen the clamps (8mm, 5/16") around the filler supports, then slide them out...
Hits: 5432
Size: 73.44 KB
Posted: 2/21/11
To lift the bed, loosen the clamps (8mm, 5/16") around the filler supports, then slide them out...		To lift the bed, remove the filler caps & filler neck screws (5.5mm, 7/32"), then push the neck...
Hits: 3150
Size: 87.85 KB
Posted: 2/21/11
To lift the bed, remove the filler caps & filler neck screws (5.5mm, 7/32"), then push the neck...		To lift the bed, disconnect the taillight wiring forward of the rear bumper. Go to the NEXT pic... ...
Hits: 2977
Size: 81.9 KB
Posted: 2/21/11
To lift the bed, disconnect the taillight wiring forward of the rear bumper. Go to the NEXT pic... ...
To lift the bed, remove the nuts (18mm) for the bed bolts (8 on longbed; 6 on all others). [url=htt...
Hits: 2810
Size: 84.84 KB
Posted: 2/21/11
To lift the bed, remove the nuts (18mm) for the bed bolts (8 on longbed; 6 on all others). [url=htt...		These bed bolts are in much better condition than I expected, considering how rusty the hubs were. ...
Hits: 2529
Size: 83.27 KB
Posted: 2/21/11
These bed bolts are in much better condition than I expected, considering how rusty the hubs were. ...		To lift the bed for fuel tank access, I used my electric hoist (an ATV winch & some scrap metal). G...
Hits: 4180
Size: 66.17 KB
Posted: 2/21/11
To lift the bed for fuel tank access, I used my electric hoist (an ATV winch & some scrap metal). G...		Easy! Go to the NEXT pic... [url=https://www.supermotors.net/registry/media/471464][img]https://ww...
Hits: 3714
Size: 71.75 KB
Posted: 2/21/11
Easy! Go to the NEXT pic... [url=https://www.supermotors.net/registry/media/471464][img]https://ww...		It'll be much easier to work on the tanks this way, rather than from below. Go to the NEXT pic...
Hits: 2730
Size: 86.27 KB
Posted: 2/21/11
It'll be much easier to work on the tanks this way, rather than from below. Go to the NEXT pic...
I'll vacuum & wash the tanks before opening anything. The unusually large fuel line fitting at the ...
Hits: 2469
Size: 82.94 KB
Posted: 2/21/11
I'll vacuum & wash the tanks before opening anything. The unusually large fuel line fitting at the ...		I'll vacuum & wash the tanks before opening anything. Go to the NEXT pic...
Hits: 2669
Size: 81.59 KB
Posted: 2/21/11
I'll vacuum & wash the tanks before opening anything. Go to the NEXT pic...		Even though I put a safety strap under the suspended bed, I rolled the chassis out to work on the ta...
Hits: 2782
Size: 103.85 KB
Posted: 2/21/11
Even though I put a safety strap under the suspended bed, I rolled the chassis out to work on the ta...		After washing & vacuuming, and a little penetrating oil (NONE on the O-ring), the lock ring can come...
Hits: 2885
Size: 95.37 KB
Posted: 3/29/11
After washing & vacuuming, and a little penetrating oil (NONE on the O-ring), the lock ring can come...		Some force was necessary to break the FDM loose from the bottom of the tank. See the NEXT several p...
Hits: 2645
Size: 91.7 KB
Posted: 3/29/11
Some force was necessary to break the FDM loose from the bottom of the tank. See the NEXT several p...
I can't describe the smell... For more info, read these captions: [url=https://www.supermotors.net...
Hits: 2911
Size: 100.39 KB
Posted: 3/29/11
I can't describe the smell... For more info, read these captions: [url=https://www.supermotors.net...		The back tank was just as bad as the front. 6 years is too long for gas to sit. I burned both tank...
Hits: 3161
Size: 89.21 KB
Posted: 3/29/11
The back tank was just as bad as the front. 6 years is too long for gas to sit. I burned both tank...		After a few weeks' searching, I found a rear tank. It's from a '93, but the only difference is the ...
Hits: 2351
Size: 59.62 KB
Posted: 4/17/11
After a few weeks' searching, I found a rear tank. It's from a '93, but the only difference is the ...		Since I got the pigtail with the '93 tank, and I saved the original '95 pump plate, it was easy to m...
Hits: 5686
Size: 85.41 KB
Posted: 4/17/11
Since I got the pigtail with the '93 tank, and I saved the original '95 pump plate, it was easy to m...		To temporarily (or indefinitely) run any '90-96 dual-tank truck on 1 tank, it's necessary to plug bo...
Hits: 14148
Size: 74.81 KB
Posted: 4/17/11
To temporarily (or indefinitely) run any '90-96 dual-tank truck on 1 tank, it's necessary to plug bo...
Today, I found a decent front tank & pump - only a little dent near the front.
Hits: 2289
Size: 44.47 KB
Posted: 4/19/11
Today, I found a decent front tank & pump - only a little dent near the front.		The motor spins, and I rebuilt the sender, which now produces a smooth signal. After it's installed...
Hits: 2405
Size: 93.33 KB
Posted: 4/19/11
The motor spins, and I rebuilt the sender, which now produces a smooth signal. After it's installed...		It works! For more info, read these captions: [url=https://www.supermotors.net/registry/2742/12737...
Hits: 2231
Size: 88.59 KB
Posted: 4/19/11
It works! For more info, read these captions: [url=https://www.supermotors.net/registry/2742/12737...		Now that there are 2 working tanks, I can drop the bed back on. For more info, read these captions:...
Hits: 2216
Size: 99.39 KB
Posted: 4/19/11
Now that there are 2 working tanks, I can drop the bed back on. For more info, read these captions:...		It's much cleaner than I expected.
Hits: 2231
Size: 84.31 KB
Posted: 2/21/11
It's much cleaner than I expected.
I think that rocker panel is the only damage to the cab.
Hits: 2312
Size: 92.26 KB
Posted: 2/21/11
I think that rocker panel is the only damage to the cab.		These rubber plugs are for the cab resonance weight. I haven't found any pattern to which trucks go...
Hits: 2480
Size: 56.52 KB
Posted: 2/21/11
These rubber plugs are for the cab resonance weight. I haven't found any pattern to which trucks go...		I've only had this for ~10 years - it's about time it got used on something. The "E3..." ...
Hits: 2121
Size: 86.3 KB
Posted: 3/29/11
I've only had this for ~10 years - it's about time it got used on something. The "E3..." ...		That's where it belongs... See the PREVious 2 pics.
Hits: 2042
Size: 82.94 KB
Posted: 3/29/11
That's where it belongs... See the PREVious 2 pics.		The first few blasts drained out nearly opaque brown - I think someone must have spilled a LOT of co...
Hits: 3030
Size: 91.54 KB
Posted: 3/29/11
The first few blasts drained out nearly opaque brown - I think someone must have spilled a LOT of co...
The seat cover, seatback, seat belts, & rear carpet got hosed out & sun-dried. The headrest covers ...
Hits: 2467
Size: 105.87 KB
Posted: 3/29/11
The seat cover, seatback, seat belts, & rear carpet got hosed out & sun-dried. The headrest covers ...		The floor cover, floor-mounted belts, & rear carpet got hosed off, sun-dried, and treated with Lysol...
Hits: 2229
Size: 84.2 KB
Posted: 3/29/11
The floor cover, floor-mounted belts, & rear carpet got hosed off, sun-dried, and treated with Lysol...		I sanded & painted the shifter, and reinstalled the knob.
Hits: 2020
Size: 76.07 KB
Posted: 4/9/11
I sanded & painted the shifter, and reinstalled the knob.		The windshield side & lower trim were packed with leaves. While it was off, I removed the wiper val...
Hits: 5874
Size: 96.21 KB
Posted: 4/9/11
The windshield side & lower trim were packed with leaves. While it was off, I removed the wiper val...		It took a few hours with some BP hammers, prybars, & wood blocks, but it's pretty close to its origi...
Hits: 3378
Size: 67.77 KB
Posted: 4/14/11
It took a few hours with some BP hammers, prybars, & wood blocks, but it's pretty close to its origi...
It almost looks like a truck again. The painter says he'll get to my doors, fender, & valance tomor...
Hits: 1911
Size: 98.9 KB
Posted: 4/20/11
It almost looks like a truck again. The painter says he'll get to my doors, fender, & valance tomor...		I've already straightened the reinforcing plate behind the headlight opening, but the core support i...
Hits: 2095
Size: 104.59 KB
Posted: 3/29/11
I've already straightened the reinforcing plate behind the headlight opening, but the core support i...		I've only had a spare R fender for ~5 years, and it's almost the right color. [url=https://www.supe...
Hits: 2075
Size: 97.6 KB
Posted: 3/29/11
I've only had a spare R fender for ~5 years, and it's almost the right color. [url=https://www.supe...		It was probably the same squirrel who lived in the '93 Bronco who knew how to get in through the cow...
Hits: 1813
Size: 87.64 KB
Posted: 3/29/11
It was probably the same squirrel who lived in the '93 Bronco who knew how to get in through the cow...		This '93 Bronco door is MX (Dark Shadow Blue Metallic), which isn't quite as purple as this truck's ...
Hits: 1829
Size: 82.57 KB
Posted: 3/29/11
This '93 Bronco door is MX (Dark Shadow Blue Metallic), which isn't quite as purple as this truck's ...
Again: a big improvement. [url=https://www.supermotors.net/registry/media/850897][img]https://www.s...
Hits: 1898
Size: 53.41 KB
Posted: 4/14/11
Again: a big improvement. [url=https://www.supermotors.net/registry/media/850897][img]https://www.s...		I picked up the painted parts yesterday, so I can finally remove the bad doors. Unfortunately, the ...
Hits: 1714
Size: 84.25 KB
Posted: 5/5/11
I picked up the painted parts yesterday, so I can finally remove the bad doors. Unfortunately, the ...		About what you'd expect. The gasket has been smashed by the misaligned door for so long that it doe...
Hits: 1658
Size: 95.96 KB
Posted: 5/5/11
About what you'd expect. The gasket has been smashed by the misaligned door for so long that it doe...		I'd have gotten this fender on much faster if I hadn't had to change the voltage regulator, pull the...
Hits: 1657
Size: 111.03 KB
Posted: 5/5/11
I'd have gotten this fender on much faster if I hadn't had to change the voltage regulator, pull the...		As usual, I'm painting at night. But it seems to be working OK - the other vehicles still look dece...
Hits: 1493
Size: 79.44 KB
Posted: 5/5/11
As usual, I'm painting at night. But it seems to be working OK - the other vehicles still look dece...
Pretty good for spray painting in the dark on dirt with no prep. Now I just need some pinstriping.
Hits: 1508
Size: 81.48 KB
Posted: 5/5/11
Pretty good for spray painting in the dark on dirt with no prep. Now I just need some pinstriping.		I wasn't planning to wash it for a week after I finished painting, but since a storm blew through la...
Hits: 1641
Size: 104.48 KB
Posted: 5/7/11
I wasn't planning to wash it for a week after I finished painting, but since a storm blew through la...		Under all the sap, mildew, & grime, it's not as bad as I thought.
Hits: 1674
Size: 57.1 KB
Posted: 5/7/11
Under all the sap, mildew, & grime, it's not as bad as I thought.		I still have to touch up the tailgate, bed corner, & a few other spots, and paint on the pinstripes....
Hits: 1552
Size: 63.28 KB
Posted: 5/7/11
I still have to touch up the tailgate, bed corner, & a few other spots, and paint on the pinstripes....		I still have to touch up the tailgate & a few other spots, and paint on the pinstripes. But the bum...
Hits: 1496
Size: 104.91 KB
Posted: 5/7/11
I still have to touch up the tailgate & a few other spots, and paint on the pinstripes. But the bum...
You'd never guess what it looked like 3 months ago, so here's a reminder: [url=https://www.supermot...
Hits: 1578
Size: 97.41 KB
Posted: 5/7/11
You'd never guess what it looked like 3 months ago, so here's a reminder: [url=https://www.supermot...		I've never seen this before - it looks like someone went along the heater hose with a needle punchin...
Hits: 1876
Size: 46.26 KB
Posted: 4/17/11
I've never seen this before - it looks like someone went along the heater hose with a needle punchin...		After a little driving, it became apparent that there was a serious oil leak dripping onto the rear ...
Hits: 3958
Size: 99.2 KB
Posted: 5/10/11
After a little driving, it became apparent that there was a serious oil leak dripping onto the rear ...		This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacu...
Hits: 3431
Size: 109.19 KB
Posted: 5/10/11
This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacu...		The main leak is the big GAP almost halfway down on the R side (LEFT in the pic) just this side of t...
Hits: 2066
Size: 72.16 KB
Posted: 5/10/11
The main leak is the big GAP almost halfway down on the R side (LEFT in the pic) just this side of t...
After a couple of long drives, I dumped & refilled the transmission, and cleaned the magnet. Fillin...
Hits: 2668
Size: 90.07 KB
Posted: 5/13/11
After a couple of long drives, I dumped & refilled the transmission, and cleaned the magnet. Fillin...		It looks normal again, and I'm driving it whenever I can. [url=https://www.supermotors.net/registry...
Hits: 1669
Size: 88.59 KB
Posted: 5/13/11
It looks normal again, and I'm driving it whenever I can. [url=https://www.supermotors.net/registry...		I rebuilt the MFS today, so everything is working now. [url=https://www.supermotors.net/registry/me...
Hits: 2401
Size: 88.11 KB
Posted: 5/13/11
I rebuilt the MFS today, so everything is working now. [url=https://www.supermotors.net/registry/me...		Clean enough to sit on, which is saying a lot, considering how bad it was. [url=https://www.supermo...
Hits: 1857
Size: 56.48 KB
Posted: 5/13/11
Clean enough to sit on, which is saying a lot, considering how bad it was. [url=https://www.supermo...		The dash clunked every time I hit a bump, so I tracked down & installed one of the few remaining rep...
Hits: 1837
Size: 81.69 KB
Posted: 5/18/11
The dash clunked every time I hit a bump, so I tracked down & installed one of the few remaining rep...
This corner looks even better after some paint. [url=https://www.supermotors.net/registry/media/862...
Hits: 1696
Size: 73.76 KB
Posted: 5/13/11
This corner looks even better after some paint. [url=https://www.supermotors.net/registry/media/862...		I found some black center caps in my junkpile which are correct, but rare. I'd rather put red ones ...
Hits: 1953
Size: 100.75 KB
Posted: 5/13/11
I found some black center caps in my junkpile which are correct, but rare. I'd rather put red ones ...		I finally found another chrome rim for the RHR, and the bumper is a lot straighter than it used to b...
Hits: 1989
Size: 70.87 KB
Posted: 5/27/11
I finally found another chrome rim for the RHR, and the bumper is a lot straighter than it used to b...		I finally found another chrome rim for the RHR.
Hits: 3085
Size: 65.37 KB
Posted: 5/27/11
I finally found another chrome rim for the RHR.		The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...
Hits: 2201
Size: 86.98 KB
Posted: 6/3/11
The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...
The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...
Hits: 1935
Size: 87.79 KB
Posted: 6/3/11
The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...		The torn L engine mount is another part of the vibration during acceleration... I have the engine l...
Hits: 1832
Size: 78.13 KB
Posted: 6/3/11
The torn L engine mount is another part of the vibration during acceleration... I have the engine l...		The torn R engine mount is YET another part of the vibration during acceleration... [url=https://ww...
Hits: 1986
Size: 94.88 KB
Posted: 6/3/11
The torn R engine mount is YET another part of the vibration during acceleration... [url=https://ww...		These were another part of the vibration during acceleration... It has been significantly reduced a...
Hits: 3052
Size: 125.61 KB
Posted: 6/3/11
These were another part of the vibration during acceleration... It has been significantly reduced a...		Frank bought it a month ago, and it's finally back for one more front fuel pump. For more info, rea...
Hits: 2342
Size: 106.34 KB
Posted: 7/10/11
Frank bought it a month ago, and it's finally back for one more front fuel pump. For more info, rea...
This 2WD Mazda M5OD-R2 output shaft gave no sign of damage before letting go while driving at very l...
Hits: 1170
Size: 53.42 KB
Posted: 3/9/16
This 2WD Mazda M5OD-R2 output shaft gave no sign of damage before letting go while driving at very l...		At almost 180Kmi, the ADM has been screeching intermittently, and it stunk. It has apparently been ...
Hits: 1391
Size: 71.55 KB
Posted: 4/24/18
At almost 180Kmi, the ADM has been screeching intermittently, and it stunk. It has apparently been ...		Before & After
Hits: 291
Size: 41.45 KB
Posted: 7/4/21
Before & After		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2025 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog