KIMG0400.JPG 50 hits | 41.98 KB | Posted: 5/27/20 due to the pipe bumper i have been kinda putting off doing a winch. decided it was finally time to a...
KIMG0401.JPG 38 hits | 60.57 KB | Posted: 5/27/20 this is a Badlands universal winch plate form Harbor Freight. i cut about 6 inches from each side so...
KIMG0402.JPG 44 hits | 39.38 KB | Posted: 5/27/20 i decided that those pieces i cut off would be great for mounting the plate to the round bumper. i w...
KIMG0404.JPG 39 hits | 41.07 KB | Posted: 5/27/20 because the winch mounts from 4 bolts at the bottom, i need to have the winch forward of the bumper ...
KIMG0405.JPG 47 hits | 35.22 KB | Posted: 5/27/20 for more support i welded a brace to the standoff.
KIMG0410.JPG 40 hits | 45.29 KB | Posted: 5/27/20 winch plate is bolted on with (6) 1/2 inch grade 8 bolts. it should be plenty strong
i cut the shar...
KIMG0412.JPG 55 hits | 39.94 KB | Posted: 5/27/20 as i do with all my trucks, i disassembled the relay box that normally mounts on top of the winch. i...
Winch
