IM000190.jpg 691 hits | 23.95 KB | Posted: 6/30/03 Here is where our story begins. A place most of us know well.
IM000191.jpg 804 hits | 43.02 KB | Posted: 6/30/03 I found my compressor out of this Volvo. It also has a bitchin' bracket on it already in which I jus...
IM000195.jpg 783 hits | 43.14 KB | Posted: 6/30/03 Here it is in all its glory!
IM000192.jpg 762 hits | 40.8 KB | Posted: 6/30/03 Here's the exact pump if anyone is curious.
IM000197.jpg 767 hits | 39.72 KB | Posted: 6/30/03 I was going to get a short belt for the compressor but hey! This works!
IM000198.jpg 745 hits | 28.46 KB | Posted: 6/30/03 Here's a close up of the tabs I welded onto the stock Volvo bracket. Basically all I did was cut so...
IM000199.jpg 649 hits | 73.22 KB | Posted: 6/30/03 Tension Bracket. Just 3 holes in a piece of angle iron.
IM000200.jpg 716 hits | 62.61 KB | Posted: 6/30/03 Another close up of the tabs welded onto the stock Volvo bracket.
IM000203.jpg 670 hits | 67.78 KB | Posted: 6/30/03 Here is the bracket painted
IM000204.jpg 680 hits | 35.1 KB | Posted: 6/30/03 Here is my manifold minus the pressure switch. It works in this configuration but it helps to have ...
IM000205.jpg 782 hits | 28.13 KB | Posted: 6/30/03 I had a crank case breather laying around so I just pushed it on the intake hose. This will work un...
IM000207.jpg 702 hits | 65.47 KB | Posted: 6/30/03 Here is the air fitting on my rear bumper. I know it's ugly but it holds the pressure just fine.
IM000446.jpg 672 hits | 78.08 KB | Posted: 12/18/03 Here's a picture of it with the front clip removed
IM000648.jpg 706 hits | 72.93 KB | Posted: 8/24/04 Long after I've had it but here's a good shot with all the body pannels out of the way.