DSC01078.JPG
196 hits | 107.06 KB | Posted: 3/3/13
The beginning

DSC01079.JPG
132 hits | 65.84 KB | Posted: 3/3/13
Groves cut in 1/4" plate to allow it to be folded and welded

DSC01081.JPG
118 hits | 78.4 KB | Posted: 3/3/13
First test fit. Phew...just made it. It was tight enough to stay in place by itself

DSC01090.JPG
160 hits | 87.7 KB | Posted: 3/3/13
Pic of back section folded down and attached to gussets for support

DSC01091.JPG
138 hits | 62.98 KB | Posted: 3/3/13

DSC01096.JPG
137 hits | 83.19 KB | Posted: 3/3/13
First leg tacked in place

DSC01103.JPG
196 hits | 88.27 KB | Posted: 3/3/13
Taking shape

DSC01109.JPG
145 hits | 65.49 KB | Posted: 3/3/13
Pic of light tab and 1/4" plate for triangulation

DSC01111.JPG
134 hits | 74.3 KB | Posted: 3/3/13

DSC01116.JPG
151 hits | 97.46 KB | Posted: 3/3/13

DSC01115.JPG
144 hits | 95.75 KB | Posted: 3/3/13

DSC01120.JPG
149 hits | 89.37 KB | Posted: 3/3/13

DSC01123.JPG
146 hits | 83.4 KB | Posted: 3/3/13

DSC01129.JPG
158 hits | 52.39 KB | Posted: 3/3/13
79 pounds and another 90 for the winch. Not too bad. No front spring sag.

DSC01149.JPG
160 hits | 103.04 KB | Posted: 3/3/13