IMG_20141121_001300.jpg 158 hits | 73.87 KB | Posted: 11/21/14 Lay ouy materials and safety gear. Make sure you have a trusty helper!
IMG_20141121_001109.jpg 206 hits | 77.79 KB | Posted: 11/22/14 I used a 1/8" x 1" flat bar that I bent to how I wanted my 1/4" plate to be. This was...
IMG_20141121_001245.jpg 163 hits | 54.67 KB | Posted: 11/22/14 I scored my plate with a cutoff wheel on my hf grinder. I burnt this grinder up while grinding my ou...
IMG_20141121_001058.jpg 207 hits | 74.54 KB | Posted: 11/22/14 I started this with a 8" x 48" piece of A36 plate steel. Scored, bent and welded the plate...
IMG_20141121_001046.jpg 200 hits | 65.98 KB | Posted: 11/22/14 I wanted these two welds to be smooth for drainage later on.
IMG_20141121_000947.jpg 224 hits | 59.3 KB | Posted: 11/22/14 Started building up the sides at about a 45 degree angle, but eyeballed it. The front of my skid has...
IMG_20141122_024208.jpg 219 hits | 43.02 KB | Posted: 11/22/14 This would be the top. I used some 1/8" angle to brace the flat part some. I cutthe top of the ...
IMG_20141122_024145.jpg 180 hits | 34.54 KB | Posted: 11/22/14 I often use my dog run to hang stuff for paint. Dark outside with Samsung phone makes for blurry pho...
IMG_20141122_022636.jpg 175 hits | 39.68 KB | Posted: 11/22/14 This is my finished product. I painted it with the color I plan on using as my accent color when pai...
20141123_155259.jpg 180 hits | 59.35 KB | Posted: 11/23/14 Tools I used to install the skid.
Tcase Skid
