KIMG0081.JPG 50 hits | 41.09 KB | Posted: 3/30/22 After a offroading trip, i found that i managed to break the front passenger leaf spring and bend th...
KIMG0097.JPG 45 hits | 31.24 KB | Posted: 3/30/22 I ordered 3 pair of leaf springs from General Spring KC as well as 2 pair of rear shackles and bolts...
KIMG0086.JPG 36 hits | 36.09 KB | Posted: 3/30/22 stock, the truck only has about 2 inches of upward wheel travel before it hits the bump stop. while ...
KIMG0156.JPG 38 hits | 48.01 KB | Posted: 3/30/22 new F350 solid axle leaf spring
original F250 'light duty' TTB leaf spring
the new leaf out of the...
KIMG0157.JPG 45 hits | 41.2 KB | Posted: 3/30/22 removing the 3/8 in factory plate and adding two 1/2 leveling plates gives right at 2 inches of lift...
KIMG0160.JPG 42 hits | 40.99 KB | Posted: 3/30/22 The new leafs, leveling kit, and drop brackets installed. Also new poly bump stops
I decided to go ...
KIMG0159.JPG 118 hits | 66.94 KB | Posted: 3/30/22 the original leaf springs. i drove on that broken leafspring for about a month.
a shame i jsut rep...
KIMG0165.JPG 85 hits | 49.51 KB | Posted: 3/30/22 this truck with its new 2.5 inch lift kit did make the steering geometry pretty bad. even factory th...
KIMG0171.JPG 392 hits | 38.44 KB | Posted: 3/30/22 adding a 3 inch drop pitman arm did help bring the geometry close to factory.
i may still consider...
KIMG0103.JPG 134 hits | 40.18 KB | Posted: 3/30/22 my original rear spring code was Code 6. they a 1700lb rated spring used on the 'light duty' F250. T...
KIMG0105.JPG 132 hits | 38.01 KB | Posted: 3/30/22 the bolts for the rear leafs were worn pretty badly. always good to get new bolts!
KIMG0104.JPG 146 hits | 47.76 KB | Posted: 3/30/22 new rear leafs are in
KIMG0161.JPG 75 hits | 39.58 KB | Posted: 3/30/22 new front and rear leafs on 33 inch tires. might have to consider 35 inch tires next time
Leaf Springs/Leveling Kit
