Before.jpg
3350 hits | 25.8 KB | Posted: 9/21/04
One of my first trail rides in SWLA.

Wreck2 Car.jpg
3823 hits | 72.28 KB | Posted: 1/17/04
This is the car that hit me, but most of his damage came from the telephone pole he hit just AFTER s...

Wreck2_Pole.jpg
4096 hits | 26.3 KB | Posted: 6/30/03
This is where I came to a stop after being hit in the RHR tire by a car doing ~60. I drove away wit...

CarbBay.jpg
2398 hits | 78.31 KB | Posted: 5/19/07
About 100Kmi after I bought the truck, the engine was worn slap out, so I rebuilt it & the carb.

Th...

BattAux.jpg
1520 hits | 78.44 KB | Posted: 11/11/11
Note the OE (not to this truck) aux.batt. tray above the (non-OE) antifreeze jug.

[url=https://www....

CarbIn.jpg
1503 hits | 72.52 KB | Posted: 11/11/11
This is at least the 2nd rebuild for this engine & carb.

At the time, I didn't know it would be the...

CarbRebuilt.jpg
2771 hits | 92.11 KB | Posted: 5/19/07
Everything seemed to be good after I rebuilt the carb, but I had a lot of trouble keeping it tuned, ...

Sunk2.jpg
5033 hits | 89.55 KB | Posted: 7/15/03
This was the inspiration for the front bumper. It took 12 hours with a come-along to spin it 180 de...

Winchup.jpg
4276 hits | 26.98 KB | Posted: 6/30/03
This is the easiest way to clean the underside - just use the winch & a strong tree.

[url=http://...

MufflerBlown.jpg
1057 hits | 47.5 KB | Posted: 3/8/13
Ever wonder what the inside of a muffler looks like? I don't.

EFI_Before.jpg
3653 hits | 29.7 KB | Posted: 6/30/03
Just before I swapped to EFI in '98. A rubber diaphragm in the carb ruptured & washed the rings out...

BumperFIsoFr.jpg
4136 hits | 49.19 KB | Posted: 2/18/06
My front bumper (SOLD) in perspective, front.
See the NEXT few pics...

The outboard sections are st...

BumperFIsoRr.jpg
2869 hits | 41.81 KB | Posted: 2/18/06
My front bumper (SOLD) in perspective, rear

[url=https://www.supermotors.net/registry/media/292104]...

BumperFfoldIsoFr.jpg
3164 hits | 38.48 KB | Posted: 2/18/06
My front bumper (SOLD) in perspective, with the grille guard folded down

[url=https://www.supermoto...

Rear See-thru s.jpg
3636 hits | 32.29 KB | Posted: 2/18/06
A see-thru of the rear bumper's design.

[url=https://www.supermotors.net/registry/media/187572][img...

Rear PerspectiveTop.jpg
2730 hits | 16.81 KB | Posted: 3/19/05
My rear bumper in perspective from above. It attaches by the original bumper frame bolts, plus 3 mo...

Rear PerspectiveBottom.jpg
2715 hits | 21.03 KB | Posted: 3/19/05
My rear bumper in perspective from below

[url=https://www.supermotors.net/registry/media/292107][im...

BumperR 2L.jpg
3161 hits | 59.85 KB | Posted: 3/12/05
I designed & built the rear bumper to bolt on using only the factory holes in the frame & the ones f...

Bumper Junk.JPG
6004 hits | 70.81 KB | Posted: 3/3/05
This is what I usually store in the rear bumper:
shackle draw bar
4" drop draw bar with 2"...

RearBumper.JPG
1021 hits | 146.89 KB | Posted: 12/10/14
Having flat surfaces is SOOOOOO convenient.

[url=https://www.supermotors.net/registry/media/993030]...

Zone_TieRod.jpg
6348 hits | 21.78 KB | Posted: 6/30/03
Exhibit A why I HATE the "zone". This tie rod end just dropped away from its ball as I wa...

Zone_UJoint.jpg
4649 hits | 22.18 KB | Posted: 6/30/03
Exhibit B why I HATE the "zone". Again, low miles and no off-roading. Even though I was ...

EFIEngineL.jpg
2468 hits | 54.15 KB | Posted: 5/19/07
I found this jewel in AOK junkyard in Eunice, LA, where I collected all the parts needed to swap it ...

EFIEngineF.jpg
2940 hits | 63.8 KB | Posted: 5/19/07
I found this jewel in AOK junkyard in Eunice, LA, where I collected all the parts needed to swap it ...

Alternator 130A.jpg
5504 hits | 65.7 KB | Posted: 9/5/04
130A alternator from V6 Taurus (8 1/8" between the mounting bolts, & case clocked for this appl...

EFIEngineR.jpg
2296 hits | 56.51 KB | Posted: 5/19/07
I found this jewel in AOK junkyard in Eunice, LA, where I collected all the parts needed to swap it ...

EFIEngineT.jpg
2138 hits | 61.97 KB | Posted: 11/11/11
This 4.9L came out of a '95 F150 that was crashed so hard that all the accessory brackets on the fro...

Roll_LSide.jpg
4187 hits | 35.65 KB | Posted: 6/30/03
After rolling it at ~45mph, this is what was left. After taking this picture, I reset the inertia s...

EEC Install.JPG
3758 hits | 93.23 KB | Posted: 7/10/03
This shows how I mounted the '95 computer in the '82 body.

Rebuild.jpg
3888 hits | 24.62 KB | Posted: 6/30/03
This is just after setting the replacement '82 body back onto the '83 chassis with '95 engine.

Sunshine_L.jpg
3430 hits | 34.8 KB | Posted: 6/30/03
Just after replacing the body.

Jville.jpg
1594 hits | 46.07 KB | Posted: 11/11/11

SwingawayBrace1.JPG
4569 hits | 52.14 KB | Posted: 7/24/03
It's just a 1 1/2" long piece of 3/4" angle iron welded along the inboard edge pressed aga...

SwingawayBrace2.JPG
3804 hits | 56.93 KB | Posted: 7/24/03
It's just a 1 1/2" long piece of 3/4" angle iron welded along the inboard edge pressed aga...

Current.JPG
6382 hits | 46.97 KB | Posted: 6/30/03
This was just after moving to Memphis in 1999. Since then, I've removed, sandblasted, & powdercoate...

CB_Mount.JPG
8049 hits | 31.61 KB | Posted: 6/30/03
My overhead console is made of 2 pieces of sheet metal. The first one (visible around the scanner) ...

Compass_Mirror.JPG
3397 hits | 25.42 KB | Posted: 6/30/03
Don't leave home without it.

Gauge_Panel.jpg
6170 hits | 46.96 KB | Posted: 6/30/03
Since I swapped the A/C control panel, I had to move the rear window switch here, and I like the lat...

Regeared_355@90.JPG
3788 hits | 34.05 KB | Posted: 6/30/03
This is how it ran with 3.55 gears.

See the NEXT caption...

Regeared_308@90.JPG
6029 hits | 27.89 KB | Posted: 6/30/03
This is more like it: 3.08 gears pushing 32s with an NP435 & 4.9L. No, the vacuum gauge (lower R co...

Ready.jpg
6124 hits | 40.77 KB | Posted: 6/30/03
Trail-ready.

Slider.JPG
3378 hits | 29.74 KB | Posted: 6/30/03
It took a few years to find these, and a few more months to restore them, but it was worth it.

230_Blocks.JPG
4565 hits | 27.22 KB | Posted: 6/30/03
There are about 230 concrete blocks on the trailer, and they're destined to be the base of a rock di...

Lumber Run.JPG
5074 hits | 34.58 KB | Posted: 5/20/07
This is all the lumber for the raised stage in this church, and to support the baptistry. It's prob...

HHIso.JPG
2988 hits | 53.52 KB | Posted: 10/23/07
My Hitch Hauler

It folds up to expose another receiver.

[url=http://www.supermotors.net/registry/m...

On_the_Job.JPG
4566 hits | 54.49 KB | Posted: 6/30/03
A few weeks ago, I was knocking down trees with the bumper here. A few weeks after this pic, ground...

HitchHaulerDirt.jpg
3050 hits | 85.61 KB | Posted: 5/20/07
The hitch hauler has proven endlessly useful.

[url=http://www.supermotors.net/registry/media/7764...

Trim_Panel.jpg
6091 hits | 39.69 KB | Posted: 6/30/03
First, I added the '80-86 style tailgate trim panel, but I liked this style better and finally found...

Sandbags.JPG
6544 hits | 53.3 KB | Posted: 6/30/03
I think it's about 800lb of cargo because each of the 13 sandbags weighs 50lb. The hitch hauler its...

Front_Guard_with_Axle.jpg
5032 hits | 38.12 KB | Posted: 6/30/03
Both ends can carry extra stuff. There was also a D44IFS TTB & some other stuff on the hitch hauler...

Barbie.jpg
4482 hits | 56.74 KB | Posted: 12/5/05
Now to make it Trail-Ready, all I need is a fiberglass body tub, an aftermarket frame, custom 4-link...

Forklift1.jpg
4949 hits | 95.84 KB | Posted: 8/10/03
I got a call from one of my subcontractors one Friday afternoon, and found this when I got to the si...

Forklift2.jpg
4634 hits | 92.36 KB | Posted: 8/10/03
I got a call from one of my subcontractors one Friday afternoon, and found this when I got to the si...

Forklift3.jpg
5653 hits | 83.36 KB | Posted: 8/10/03
I put a 10-ton snatch block on the forklift and ran the cable back to my bumper, parked against a co...

Visor Swap.JPG
3270 hits | 54.08 KB | Posted: 8/23/03
I finally found a set of double visors ('94-96 only) and swapped them in. I had to trim some metal ...

Engine Bay.jpg
10758 hits | 73.44 KB | Posted: 9/5/04
The '95 4.9L in the '85 F250 front clip on the '82 body tub on my '83 frame. If you look VERY close...

Stepshield.JPG
4194 hits | 76.99 KB | Posted: 12/6/04
AVS Stepshields 88068 - a nice easy cheap mod, but apparently out of production since 2006. Try 884...

Spillmaster1.JPG
4767 hits | 56.95 KB | Posted: 12/20/04
This is a SpillMaster Console mounted to a piece of ...

Spillmaster2.JPG
3973 hits | 58.38 KB | Posted: 12/20/04
To avoid putting holes in the original console, I weighted the wood plate to hold it down. The foam...

Dumpster Push.JPG
2865 hits | 86.25 KB | Posted: 5/20/07
This (almost) empty 30-yard dumpster was in the way of something in the company yard, so I thought I...

Dumpster No.JPG
2329 hits | 95.98 KB | Posted: 5/20/07
Nope. 2-wheel peel.

Radio1.JPG
4944 hits | 50.11 KB | Posted: 12/20/04
I wanted to install a DIN radio & a 1/2-DIN equalizer, so I cut out the dash.

See the NEXT few pics...

Radio2.JPG
3768 hits | 58.1 KB | Posted: 12/23/04
This is a DIN+1/2 bracket for an import truck (Mazda, I think) that I cut down & bent to fit. It ha...

Radio3.JPG
3516 hits | 55.13 KB | Posted: 12/23/04
This is the notch & screw hole on the L side.

See the PREVious & NEXT few pics...

Radio4.JPG
3154 hits | 51.29 KB | Posted: 12/23/04
These are the interlocking tabs on the R side. The weight rests on the bottom of the cutout.

See t...

VINStickerPublic.jpg
4865 hits | 52.85 KB | Posted: 1/9/05
My original door sticker (SN edited)

It was lost with the original body tub after the rollover, so ...

Wiper Valance 2.JPG
3724 hits | 103.68 KB | Posted: 9/12/05
The '92-96 wiper valance will NOT fit older trucks because of the difference in hood lines, but the ...

Rainbow.JPG
4288 hits | 35.14 KB | Posted: 11/10/05
I think this speaks for itself...

Axle gone.JPG
4526 hits | 64.21 KB | Posted: 1/1/06
Halfway thru swapping the worn-out '83 D44IFS for a nice '96 D44IFS. The spring towers have already...

Rear Swap.JPG
2487 hits | 64.3 KB | Posted: 5/20/07
Halfway through swapping the rear axle. I don't remember which time this was - I've done it a few t...

Broncos.jpg
2896 hits | 29.53 KB | Posted: 5/20/07
The blue '93 EB is my brother-in-law's, but he abandoned it when he got an '02 F250 KR. Since then,...

JumpSeatUp.JPG
3805 hits | 59.05 KB | Posted: 5/12/07
I'm still not sure if these were a factory option, a dealer option, or an aftermarket option. I've ...

JumpSeatDown.JPG
5183 hits | 49.25 KB | Posted: 5/12/07
I'm still not sure if these were a factory option, a dealer option, or an aftermarket option. I've ...

BumperOff.JPG
3415 hits | 62.86 KB | Posted: 5/27/07
Since it's just bolted on using only the factory frame holes, it's easy for me to remove & install t...

WeightBWinch.JPG
3692 hits | 85.16 KB | Posted: 5/27/07
This is the whole mess, with the old winch. The suspension is up exactly 3/4" now. Note that ...

SagI6.JPG
2402 hits | 47.98 KB | Posted: 7/15/07
Saginaw PS Pump, Lines, & Bracket from a '95 E150 4.9L

I got it, planning to swap it onto my truc...

MR2.JPG
3196 hits | 53 KB | Posted: 8/10/07
Still Kickin'

My g/f's nephew bought her old car away from her brother-in-law (his uncle) because...

K&Ndirty.JPG
3318 hits | 61.33 KB | Posted: 9/5/07
K&N 33-2023 fits '87-96 gas F-series/Broncos.
IF TH...

Radiator.JPG
2678 hits | 76.12 KB | Posted: 9/19/07
Mmmmmm... New (free) radiator.





Now I can see that the t-stat housing gasket is leakin...

HeaterPipe.JPG
6063 hits | 54.67 KB | Posted: 10/8/07
How I spent Columbus Day:

My t-stat cover gasket was leaking, and when I pulled it off, the cover w...

HeaterPipeIn.JPG
3782 hits | 84.06 KB | Posted: 10/10/07
It fits - it works! But I ended up having to use 2 hose clamps to keep it from slipping up since t...

RadFan.JPG
3264 hits | 72.05 KB | Posted: 10/21/07
A Lincoln Mk.VIII fan won't fit a 4.9L, even with the thinnest aftermarket 2-core brass radiator. ...

Efans.JPG
3298 hits | 94.35 KB | Posted: 2/17/08
This set of fans probably came from an ~'07 Focus, and they fit great. I'm not sure if it will be p...

Senders.JPG
2442 hits | 56.06 KB | Posted: 2/17/08
As usual, the oil pressure sender diaphragm is leaking, causing the pressure to be equal on both sid...

HeaterPipeSensor.JPG
3324 hits | 61.77 KB | Posted: 4/12/08
I finally got around to picking up a low-temp switch from an '87-89 4.9L fuel rail & wiring it into ...

ExMan.JPG
3624 hits | 86.18 KB | Posted: 9/21/08
While I had the fender off, I decided to track down a little exhaust leak. The #1 port was cracked ...

Blister.JPG
2302 hits | 54.8 KB | Posted: 10/17/08
My temporary junkyard tires have started to give out. Maybe it was those 2 trips to Hot Springs for...

Snow1-20-9.JPG
2018 hits | 76.65 KB | Posted: 1/20/09
IT'S A BLIZZARD!!!

Camera.JPG
1836 hits | 41.35 KB | Posted: 4/27/09
Wireless Remote Camera

This is a backup camera system from Costco (~$90) that I've adapted so I c...

EngMt.JPG
3911 hits | 84.31 KB | Posted: 7/17/09
I've noticed a lot of lurching when I take off lately, so I finally got around to swapping this out....

Rim16t.JPG
3424 hits | 79.62 KB | Posted: 7/20/09
A Dodge 16" rim can be made to fit a Ford. Here's how:
[url=http://www.supermotors.net/regist...

16Grinding.JPG
8419 hits | 66.85 KB | Posted: 7/20/09
Since '04-up E150 16" rims are too hard to find at a reasonable price, 16" Dodge rims can ...

Pedals2.JPG
2153 hits | 73.52 KB | Posted: 7/31/09
Just before heading off to RITS09, a shiny piece of metal fell onto my foot, and after that, it was ...

Windshield.JPG
2141 hits | 49.64 KB | Posted: 7/31/09
I've had a "trail map" & several wicked rain leaks for over a year, so as soon as I got back from RI...

Pedals6.JPG
1899 hits | 56.87 KB | Posted: 8/7/09
This is the first time my dash has been fully assembled in about 4 years.

RE12K.JPG
2753 hits | 81.46 KB | Posted: 8/8/09
I traded a used Warn xD9000i for this used Ramsey RE12000 worm-drive winch (PN 110596) the day befor...

TieDowns.JPG
3760 hits | 39.87 KB | Posted: 8/20/09
After RITS, I realized I needed some inside tie downs, so I snagged these & put them on the wheelwel...

Remingtons.JPG
3353 hits | 45.99 KB | Posted: 10/16/09
Remington Wide Brute RV AT LT285/75R16
My new tires, which are approximately equivalent to 33x11.50R...

TGLockCylBk.JPG
1745 hits | 51.32 KB | Posted: 11/18/09
7 years after swapping this tailgate on, I finally got the lock cylinder keyed, and I had a black be...

Spacers.JPG
2490 hits | 65.8 KB | Posted: 2/16/10
I finally broke down & ordered a set of 2" spacers to push the Dodge rims out where they belong...

Spacers1.JPG
2512 hits | 64.25 KB | Posted: 2/17/10
They're quick & easy to install, but I still managed to piss off the boss by doing it at lunch inste...

Spacers2.JPG
2627 hits | 55.4 KB | Posted: 2/17/10
They're quick & easy to install, but I still managed to piss off the boss by doing it at lunch inste...

LUjoint.JPG
1640 hits | 67.06 KB | Posted: 8/1/10
I finally got around to pulling the axleshafts I broke at Greg's about a month ago.

[url=http://w...

CoilSpacer1.JPG
1993 hits | 82.3 KB | Posted: 9/4/10
I found these at a race shop for $30/pr. They should give me back the height I had before spacing t...

CoilSpacer2.JPG
2152 hits | 76.79 KB | Posted: 9/4/10
The effective height between the grooves is only 1", so they'll go in the tight coils near the ...

CoilSpacer3.JPG
1900 hits | 85.05 KB | Posted: 9/4/10
The rubber coil spacers went in a LOT easier than I expected, simply by jacking the frame until the ...

CoilSpacer4.JPG
3038 hits | 93.93 KB | Posted: 9/6/10
Not much difference after adding the rubber coil spacers, but that's exactly what I wanted. They on...

Cont6.JPG
5946 hits | 105.31 KB | Posted: 9/14/10
The engine-running voltage between the alternator case & battery negative post immediately after cra...

WaterGasket.JPG
2380 hits | 85.16 KB | Posted: 12/24/10
Replacing a leaky water pump gasket. I'm a big fan of CopperCoat; not only on the pump's gasket sur...

Herd.JPG
1686 hits | 66.47 KB | Posted: 8/13/11
They're coagulating!

The white '95XLT is my neighbor's, and the green '93 belongs to a guy I met ...

ZzCracks.JPG
4230 hits | 43.57 KB | Posted: 6/24/12
This body has HAD IT!!! I didn't realize it was THIS bad, but most of the spot welds above the door...

Zz10.JPG
1869 hits | 87.94 KB | Posted: 6/26/12
After pulling the headliner, I stored the camper shell.

[url=http://www.supermotors.net/registry/me...

Zz6.JPG
1569 hits | 93.5 KB | Posted: 6/24/12
This might be its final driveable day. I pulled the headliners, door panels, dash pad & interior tr...

Zz7.JPG
1249 hits | 92.02 KB | Posted: 6/24/12
I got a lot more done than I expected, despite the heat. The arched bracket supports the older bedw...

Zz8.JPG
1821 hits | 65.15 KB | Posted: 6/24/12
Even though I was rolling, I couldn't bring myself to try for the jump seats - they're a nightmare t...

Zz11.JPG
1342 hits | 100.42 KB | Posted: 7/2/12
Working in killer heat, I pulled the front carpet.

[url=http://www.supermotors.net/registry/2742/...

Zz12.JPG
1375 hits | 99.2 KB | Posted: 7/2/12
I also pulled the 3rd-row jump seats - a task I had been DREADING, but it wasn't as bad as I expecte...

Zz13.JPG
1420 hits | 107.59 KB | Posted: 7/6/12
No need for this any more...

UPDATE: It has found a new home on a friend-of-a-friend's '80-someth...

83Zz.JPG
1524 hits | 70.25 KB | Posted: 7/6/12
No need for this any more...

UPDATE: It has found a new home on a friend-of-a-friend's '80-someth...

Zz15.JPG
1354 hits | 102.82 KB | Posted: 7/6/12

Zz16.JPG
1224 hits | 112.48 KB | Posted: 7/6/12

Zz17.JPG
1204 hits | 119.2 KB | Posted: 7/6/12
It's coming apart quickly - much quicker than it'll go back together, of course.

Zz18.JPG
1153 hits | 114.32 KB | Posted: 7/6/12

Zz19.JPG
1187 hits | 101.7 KB | Posted: 7/6/12

Zz20.JPG
1189 hits | 103.21 KB | Posted: 7/6/12
I'll remove the A/C system still charged, and take it to a friend's shop to evacuate before disassem...

Zz21.JPG
1207 hits | 98.02 KB | Posted: 7/6/12
The core support is one of the few remaining original '83 parts on the truck. Even some frame piece...

Zz22.JPG
1179 hits | 104.82 KB | Posted: 7/6/12

Zz23.JPG
1153 hits | 89.58 KB | Posted: 7/6/12

Zz24.JPG
1192 hits | 99.28 KB | Posted: 7/7/12
It's starting to look like the replacement body...

[url=http://www.supermotors.net/registry/2742/...

Zz26.JPG
1353 hits | 44.88 KB | Posted: 7/8/12
Up, up, & away! I've gotten all my money's worth out of this '82 tub & '83 frame (plus several more...

Zz27.JPG
1112 hits | 84.36 KB | Posted: 7/8/12

Zz31.JPG
1102 hits | 95.69 KB | Posted: 7/8/12

Zz34.JPG
1421 hits | 101.75 KB | Posted: 7/8/12

Zz37.JPG
1151 hits | 97.49 KB | Posted: 7/8/12

Zz38.JPG
1429 hits | 98.01 KB | Posted: 7/9/12
I had to roll the '83 chassis back to get the trailer under the outgoing '82 body.

[url=http://www....

Zz39.JPG
1682 hits | 99.71 KB | Posted: 7/9/12
Glad to see the back of THAT!

[url=http://www.supermotors.net/registry/media/929092][img]http://www...

Zz40.JPG
1267 hits | 74.93 KB | Posted: 7/9/12
This is as clean as it has been since I flipped it.

[url=http://www.supermotors.net/registry/2742...

Zz41.JPG
1185 hits | 109.08 KB | Posted: 7/9/12
This is as clean as it has been since I flipped it.

Zz43.JPG
1226 hits | 101.28 KB | Posted: 7/10/12
I guess one of the trees I ran down decided to fight back. No wonder my e-brake hasn't been working...

Zz44.JPG
1226 hits | 109.13 KB | Posted: 7/10/12
Because I specifically told Meineke NOT to torque the U-bolt OR to weld the joint, I was able to sep...

Zz46.JPG
1203 hits | 86.03 KB | Posted: 7/10/12
The engine/trans is only held in by the 8 bolts for the perches, and the PS hoses. I almost haven't...

Zz47.JPG
1338 hits | 87.57 KB | Posted: 7/10/12
I had been dreading removing the rear bumper, and it didn't disappoint, but it came off without bloo...

RearOfh.JPG
1480 hits | 76.9 KB | Posted: 7/10/12
This is the first time this bumper has come off since before it was built, so it's the first time I'...

Zz50.JPG
1284 hits | 112.99 KB | Posted: 7/11/12
PS gone; engine perch bolts gone; most of the front axle loose...

[url=http://www.supermotors.net...

Zz51.JPG
1319 hits | 71.78 KB | Posted: 7/11/12
The bed crane is going in again - this time, engine & trans together. Let's see if it survives!

...

Zz53.JPG
1243 hits | 70.23 KB | Posted: 7/11/12
It took a few tries to get the rigging right, but it's up & away.

[url=http://www.supermotors.net...

Zz54.JPG
1182 hits | 80.72 KB | Posted: 7/11/12
I have to set it down so I can tow the trailer to haul off the frame, and because I have to rebuild ...

Zz55.JPG
1310 hits | 106.31 KB | Posted: 7/11/12
With the front of the frame on the 2-post, I knocked out the front axle bolts. I'm not looking forw...

Zz56.JPG
1310 hits | 104.29 KB | Posted: 7/11/12
After scavenging everything potentially useable off the frame, the rear spring bolts came out. It's...

Zz57.JPG
1181 hits | 104.45 KB | Posted: 7/11/12
I plan to hang this so the pumpkin is straight down, and change the rear cover to a stock finned cas...

Zz58.JPG
1212 hits | 64.37 KB | Posted: 7/11/12
With the back counterbalanced by the front axle halves, it was easy to back the trailer under the fr...

Zz19 Ctoon.JPG
1147 hits | 80.11 KB | Posted: 8/5/12

83Yonder.JPG
1248 hits | 84.74 KB | Posted: 6/30/13
My old bumper has found a new home.

Remingtorns.jpg
746 hits | 99.48 KB | Posted: 9/25/16
I have nothing bad to say about Remington tires. I beat the hell out of these, and even at this poi...