IMG_20180202_172603071.jpg 62 hits | 122.38 KB | Posted: 2/4/18 beads were so tight they lifted the truck off the ground before they broke.
IMG_20180202_174143731_LL.jpg 49 hits | 123.76 KB | Posted: 2/4/18 the 37s were a total bear to take off. the 16" motion pro tire irons helped.. but I wish I had ...
IMG_20180202_182630127_LL.jpg 48 hits | 104.12 KB | Posted: 2/4/18 rims were in good shape inside. cleaned them with a rag and water before mounting.
IMG_20180202_184208508.jpg 62 hits | 82.85 KB | Posted: 2/4/18 it's important to modify the tire valve stems before installation.
IMG_20180202_184212558.jpg 62 hits | 84.16 KB | Posted: 2/4/18 the ones that came with the beadlocks were too small, so I took some of my new ones and modified the...
IMG_20180202_185235085_LL.jpg 50 hits | 114.77 KB | Posted: 2/4/18 after getting one done, we realized there was no way we were doing it another 4 times. the first bea...
IMG_20180202_191702473_LL.jpg 57 hits | 109.55 KB | Posted: 2/4/18 first thing: make sure you get baby powder all over the beadlock bag and the inner tube. THEN, using...
IMG_20180203_170836601_LL.jpg 63 hits | 90.4 KB | Posted: 2/4/18 after you get the first bead on, you go in and get the inner tube's valve stem installed and tighten...
IMG_20180202_200818187_LL.jpg 61 hits | 116.94 KB | Posted: 2/4/18 tube and bag in, and beads dropped in as well, you are ready to put the second bead on! almost done!
IMG_20180202_202854064_LL.jpg 56 hits | 109.92 KB | Posted: 2/4/18 air up the beadlock first, make sure you don't have valves in either the beadlock or the tire so it ...
Beadlocks and 40s install
