RoofHoles01.jpg
0 hits | 123.45 KB | Posted: 3/12/25

PIUs don't have luggage racks (which would make a great place to mount police lights without the pai...
RoofRack04.jpg
0 hits | 129.2 KB | Posted: 3/12/25

This '15 Ltd. was T-boned in the RHR door, so its roof rack was OK.

So were its front heated/cool...
RoofRack08.jpg
0 hits | 115.29 KB | Posted: 3/12/25

Because the factory drain holes are blocked by factory foam seals, several of the bolts were submerg...
JYparts250214.jpg
0 hits | 105.89 KB | Posted: 3/12/25

First thing was a thorough cleaning & inspection.
RoofRack03.jpg
0 hits | 108.97 KB | Posted: 3/12/25

The PIU has a short plastic filler bolted at the front, and then flexible rubber fillers held in by ...
RoofRack35.jpg
0 hits | 130.66 KB | Posted: 3/12/25

It was very quick & easy to install.

Now, for those antenna holes...
RoofHoles11.jpg
0 hits | 87.1 KB | Posted: 3/12/25

This cheap duct tape has been on here long enough for the backing to separate from the adhesive & fi...
RoofHoles14.jpg
0 hits | 123.68 KB | Posted: 3/12/25

The tape was applied over the remains of a self-adhesive foam gasket.
RoofHoles21.jpg
0 hits | 120.35 KB | Posted: 3/12/25

Some 3M Adhesive Remover and a sharpened SpitzNagel (pointy fingernail) plastic scraping tool eventu...
RoofHoles46.jpg
0 hits | 133.22 KB | Posted: 3/12/25

Some 3M Adhesive Remover and a sharpened SpitzNagel (pointy fingernail) plastic scraping tool eventu...
RoofHoles24.jpg
0 hits | 126.06 KB | Posted: 3/12/25

All the residue came up with paper towels, soap & water, and a little brake cleaner. But the paint/c...
RoofHoles49.jpg
0 hits | 116.54 KB | Posted: 3/12/25

These caps are sold for Ford Transit Connect van roofs, so I thought they'd be good here. Unfortunat...
RoofHoles37.jpg
0 hits | 126.05 KB | Posted: 3/12/25

After the sealant cured, the excess comes off fairly easily with the same SpitzNagel.
RoofHoles59.jpg
0 hits | 90.49 KB | Posted: 3/12/25

This rubber plug barely fit into the 1 larger hole, but it still got sealed down.
RoofHoles75.jpg
0 hits | 128.49 KB | Posted: 3/12/25

After all the sealant was cured, each hole was tested for several minutes.
RoofHoles78.jpg
0 hits | 95.49 KB | Posted: 3/12/25

None of them leaked, so after some wiring mods, the headliner can go back in.
RoofHoles64.jpg
0 hits | 122.83 KB | Posted: 3/12/25

There were a couple more holes than needed, so they were filled with some extra butyl sealant.
Xbars.jpg
0 hits | 89.01 KB | Posted: 3/19/25

This cheap copy set of crossbars is for '11-15 Explorer roof racks. The poor instructions show the s...

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2025 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog