DSCN1332.JPG
642 hits | 79.02 KB | Posted: 11/11/03
Gettin organized

DSCN1335.JPG
664 hits | 109.42 KB | Posted: 11/11/03
Stock gears and a Trac-Lok

DSCN1338.JPG
670 hits | 106.85 KB | Posted: 11/11/03
Carrier out

DSCN1339.JPG
678 hits | 84.29 KB | Posted: 11/11/03
Here's the stock setup on the bench

DSCN1341.JPG
680 hits | 90.63 KB | Posted: 11/11/03
New open carrier and new pinion gear

DSCN1343.JPG
696 hits | 105.14 KB | Posted: 11/11/03
Empty case

DSCN1344.JPG
765 hits | 90.72 KB | Posted: 11/11/03
Don workin the press

DSCN1346.JPG
711 hits | 106.77 KB | Posted: 11/11/03
New 4.56 ring gear goin on. Didn't forget the LocTite

DSCN1347.JPG
691 hits | 77.47 KB | Posted: 11/11/03
Creative torque method

DSCN1348.JPG
732 hits | 108.1 KB | Posted: 11/11/03
Here's the exciter ring for the ABS

DSCN1351.JPG
693 hits | 84.44 KB | Posted: 11/11/03
Exciter ring cleaned up and installed on the new ring gear

DSCN1353.JPG
647 hits | 106.36 KB | Posted: 11/11/03

DSCN1354.JPG
666 hits | 80.95 KB | Posted: 11/11/03
New pinion gear

DSCN1356.JPG
724 hits | 85.64 KB | Posted: 11/11/03
Pressing on the new carrier bearings

DSCN1357.JPG
690 hits | 83.73 KB | Posted: 11/11/03
Special carrier bearing presser

DSCN1358.JPG
682 hits | 81.68 KB | Posted: 11/11/03
Carrier back in the truck

DSCN1359.JPG
722 hits | 103.67 KB | Posted: 11/11/03
Painting some teeth to check pinion depth

DSCN1361.JPG
679 hits | 97.31 KB | Posted: 11/11/03
I sure hope I know what I am doin

DSCN1367.JPG
770 hits | 77.41 KB | Posted: 11/11/03
Made an adjustment to the shim pack

DSCN1365.JPG
699 hits | 37.4 KB | Posted: 11/11/03
Don making sure the bearing is pressed on all the way

DSCN1368.JPG
651 hits | 97.1 KB | Posted: 11/11/03
It takes some serious torque on the pinion nut

DSCN1430.JPG
696 hits | 87.51 KB | Posted: 11/11/03
Final pattern on the drive side

DSCN1433.JPG
732 hits | 85.28 KB | Posted: 11/11/03
Final pattern on the coast side

DSCN1435.JPG
740 hits | 51.5 KB | Posted: 11/11/03
Final backlash

DSCN1380.JPG
796 hits | 110.04 KB | Posted: 11/11/03
All done with the new LockRight locker installed