1975 Ford Bronco Turn Switch pictures, videos, and sounds


Hits: 1865 Size: 92.6 KB Posted: 5/17/11 The original turn signal switch in the '88 column finally gave out. If you compare its top to its b...	Hits: 1455 Size: 75.68 KB Posted: 5/17/11 To get the switch out of the column without totally disassembling the column, just pull the wire ter...	Hits: 1308 Size: 70.84 KB Posted: 5/17/11 AFTER MARKING each terminal's wire colors on the connector shell, release them by gently prying each...	Hits: 1284 Size: 77.37 KB Posted: 5/17/11 They're almost invisible in the pic, but the wire colors are scratched into the plastic shell. Do t...	Hits: 1460 Size: 82.96 KB Posted: 5/17/11 Once the shell is removed, feed the wires through the column and remove the switch. Then feed the n...
Hits: 1268 Size: 90.55 KB Posted: 5/17/11 Hang onto the old switch at least until the new switch is fully connected & tested working. For s...	Hits: 1195 Size: 85.02 KB Posted: 5/17/11 Apply a thin film of electrical grease to the 2 horn/cruise sliding contacts. For steering wheel...	Hits: 1355 Size: 50.78 KB Posted: 5/17/11 The aftermarket switch from RockAuto was junk, and is beginning to sag enough to turn on the L blink...	Hits: 1596 Size: 82.85 KB Posted: 5/17/11 This one even feels better - the aftermarket one required a LOT of force to get onto the catches, bu...