DSC02399.jpg 2734 hits | 69.24 KB | Posted: 8/18/07 View of Bronco with cab bulkhead part of soft top removed but tonneau in place.
DSC02401.jpg 1318 hits | 64.9 KB | Posted: 8/18/07 Inside view iew of Bronco with cab bulkhead part of soft top removed but tonneau in place.
DSC02406.jpg 1227 hits | 78.88 KB | Posted: 8/18/07 Aluminum flat stock from Lows was used to connect the Kayline/STC snap rails to the Bronco using the...
DSC02407.jpg 1753 hits | 63.61 KB | Posted: 8/18/07 Aluminum flat stock from Lows was used to connect the Kayline/STC snap rails to the Bronco using the...
DSC02408.jpg 1788 hits | 40.38 KB | Posted: 8/18/07 The tailgate section is heald in place at each end using a bent piece of aluminum flat stock from Lo...
DSC02409.jpg 1250 hits | 58.4 KB | Posted: 8/18/07 The aluminumflat stock was easily cut with a hack saw and shaped with a vice and hammer. Verry easy ...
DSC02411.jpg 1230 hits | 52.86 KB | Posted: 8/18/07 The run agross the tailgate is reinforced with some L channel aluminum stock from Lows.
DSC02412.jpg 1117 hits | 48.71 KB | Posted: 8/18/07 I plan on polishing the rails to make them more atractive, And I will be shortening them after the b...
DSC02414.jpg 1249 hits | 76.34 KB | Posted: 8/18/07 Top off, rails in place
DSC02415.jpg 3334 hits | 89.99 KB | Posted: 8/18/07 Top off, rails in place
DSC02416.jpg 1191 hits | 43.59 KB | Posted: 8/18/07 These holes are striped and must be repaired before attaching/making the rail to hard top mount brac...
DSC02417.jpg 1133 hits | 55.04 KB | Posted: 8/18/07 These holes are striped and must be repaired before attaching/making the rail to hard top mount brac...
Soft Top
