LHS.jpg
2149 hits | 41.27 KB | Posted: 9/9/04

RHF.jpg
2262 hits | 49.58 KB | Posted: 9/9/04

LHR.jpg
1788 hits | 40.6 KB | Posted: 9/9/04

RHR.jpg
2056 hits | 37.4 KB | Posted: 9/9/04

Engine Bay.jpg
3732 hits | 63.31 KB | Posted: 9/5/04
Engine bay

Throttle Body.jpg
2621 hits | 77.54 KB | Posted: 9/5/04
Throttle body

Polished HLs 1.JPG
1819 hits | 82.77 KB | Posted: 10/8/04
After about 5 minutes with a power polisher & some swirl remover, the old fogged yellow headlights l...

Polished HLs 2.jpg
1710 hits | 33.82 KB | Posted: 10/8/04
After about 5 minutes with a power polisher & some swirl remover, the old fogged yellow headlights l...

Polished HLs 3.jpg
1553 hits | 23.06 KB | Posted: 10/8/04
After about 5 minutes with a power polisher & some swirl remover, the old fogged yellow headlights l...

HeadlinerDual.JPG
2359 hits | 54.59 KB | Posted: 2/14/05
This dual-dome headliner came from a Grand Marquis.

RVMirror.JPG
2712 hits | 29.89 KB | Posted: 5/25/05
This is a GenTex 177, but it's the style with a 2-line display so that direction & temperature are v...

TripleTread.jpg
1882 hits | 71 KB | Posted: 6/6/05
TripleTreads $86ea from TireRack 215/70R15 make 777 RPMi which is effectively 25.956" tall.

AvatarBoth100.jpg
1730 hits | 4.38 KB | Posted: 6/10/05
Avatar 100

AvatarBoth90.jpg
1604 hits | 3.7 KB | Posted: 6/10/05
Avatar 90

Mom's Merc LHF.JPG
2057 hits | 47.43 KB | Posted: 7/2/05
Mom's 92 MGM

Mom's Merc R.JPG
1754 hits | 41.07 KB | Posted: 7/2/05
Mom's 92 MGM

Mom's Merc RHR.JPG
1620 hits | 47 KB | Posted: 7/2/05
Mom's 92 MGM

She seems to like running into things...

Temp.JPG
2417 hits | 43.4 KB | Posted: 12/29/05
Will a '96 Bronco dash fit in a '94 Crown Vic?

YES. But just barely... ;-)

[url=https://www.super...

DoorPanels94.JPG
2827 hits | 36.15 KB | Posted: 9/6/06
I didn't notice the differences when I bought this GM door panel in the junkyard - I was just excite...

DoorPanel94GMl.JPG
1907 hits | 52.18 KB | Posted: 9/6/06
Even though it's obviously different, I doubt anyone will notice.

DoorPanel94CVr.JPG
1741 hits | 55.13 KB | Posted: 9/6/06
The flash really shows off all the crud...

9-06OilAnalysis.JPG
1961 hits | 39.18 KB | Posted: 10/15/06
My oil analysis from Titan. I expected more, but I guess this is good info for $22.

InjectorClng.JPG
1363 hits | 124.22 KB | Posted: 10/4/08
The '00 injectors seem to be getting clogged, so I got another set from the junkyard & installed the...

Inverter03.JPG
2664 hits | 72.29 KB | Posted: 10/6/08
I've only had this lying around for ~2 years (as of the upload date), so I figured it was about time...

InverterFuse94.JPG
2140 hits | 66.99 KB | Posted: 6/26/09
I'm crimping these ring terminals onto the doubled wire before soldering them. For now, the MegaFus...

RotorRHF.JPG
1727 hits | 67.18 KB | Posted: 10/27/08
Hmmmm...

OdoGear.JPG
2099 hits | 79.23 KB | Posted: 11/4/08
Note the tiny blue gear inside the whte one on the side of the speedo. If you look at the original-...

Tires16st.JPG
2295 hits | 62.27 KB | Posted: 6/26/09
[url=http://www.uniroyaltires.com/tire-selector/category/car-minivan/tiger-paw-touring/tire-details]...

Tires16.JPG
15568 hits | 60.76 KB | Posted: 6/26/09
It almost looks respectable now!

[url=http://www.supermotors.net/registry/media/739754][img]http:...

Cat.JPG
4089 hits | 74.6 KB | Posted: 7/17/09
Vicky has been VERY sluggish & noisy for about a year now, so I finally pulled the trigger on a new ...

CatR.JPG
1636 hits | 44.18 KB | Posted: 8/27/10
The right cat finally started leaking at the pinch weld, so I replaced it.

CatL.JPG
1466 hits | 66.54 KB | Posted: 8/27/10
The original plastic intake finally blew, and the misfiring caused by the coolant leaking into the p...

HO2Sdownstream.JPG
1630 hits | 60.27 KB | Posted: 9/14/10
The shattered catalyst slid down and damaged the B2S2, setting P0136. This was ~$50 friend price.

Headlights.JPG
2456 hits | 72.55 KB | Posted: 9/4/10
New Headlights, FINALLY!

The originals had been polished at least 6x since I've owned it, and it ...

AlternatorMountBoss.JPG
16606 hits | 72.66 KB | Posted: 9/14/10
Following [url=http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=2136757#Post213...

SpeedoGear.JPG
3186 hits | 55.91 KB | Posted: 11/28/10
Using the mfr's diameter in [url=http://moldyrabbit.com/liquid/speedo_gear.html]Liquid's calculator[...

VIN94CV1.JPG
1663 hits | 83.28 KB | Posted: 11/28/10

21SplitBench.JPG
1742 hits | 84.76 KB | Posted: 8/19/11
The velour power split bench is OK, but I've never liked the armrest - not sturdy enough. And I've ...

22Buckets.JPG
1585 hits | 80.66 KB | Posted: 8/19/11
I ran across these in a '99 P72 in a JY, so I washed them & swapped them in. So far, I know I don't...

1Touch.JPG
1674 hits | 91.1 KB | Posted: 1/30/12
I'm rebuilding my '83 Bronco, and I plan to use several of these to make all its windows 1-touch up ...

TimeSert2.JPG
1007 hits | 59.71 KB | Posted: 3/11/13
The #2 plug blew out as I was coming to a stop light on a dinner run, so I repaired it using the Tim...

20180826_182101.jpg
3332 hits | 86.87 KB | Posted: 8/30/18
It's still driveable, but it's totalled, due to a Freestyle turning left (illegally) in front of me....

Mashed.jpg
694 hits | 93.58 KB | Posted: 1/10/19
After a quick glance, the adjuster agreed that it was totalled. I pointed out the upgrades, which h...

Stripped.jpg
1039 hits | 78.08 KB | Posted: 1/10/19
First use of the new (rebuilt) lift: stripping the old CV.

4.6L500lbs.jpg
791 hits | 82.28 KB | Posted: 1/10/19
First use of the new digital scale: weighing the '00 MGM engine (496#). It still has oil, and proba...

PwrTrn.jpg
772 hits | 90.26 KB | Posted: 1/10/19
The blue dolly was on sale at TSC for $20, so I bought 2 (and later, 2 more). There's already anothe...

Split.jpg
809 hits | 80.34 KB | Posted: 1/10/19
The body is a little too heavy & long to flip off the frame like the '96 Bronco, so I slit it about ...

20190121_201739.jpg
748 hits | 60 KB | Posted: 1/27/19
When the weather got decent I rolled the remains out & flipped the body off.

20190123_165043.jpg
781 hits | 92.86 KB | Posted: 1/27/19
Getting the suspension off was a little tricky (especially the front), but I got it done without inj...

20190127_143110.jpg
795 hits | 89.3 KB | Posted: 1/27/19
It only took about an hour with the air hammer & slitting chisel to break the frame down into manage...