boltkit.jpg
570 hits | 91.54 KB | Posted: 8/23/05
Here s the bag of hardware that came with the drop mounts. the kit part number is CHB542 this is for...

class2c.jpg
801 hits | 94.84 KB | Posted: 8/23/05
here are the Class II skyjacker drop mounts. Alot stronger than most of the other drop mounts on the...

class2b.jpg
680 hits | 93.57 KB | Posted: 8/23/05
here is a side view. these have bracing thru the center and are heavey duty. The top black bar is a ...

class2d.jpg
823 hits | 96.56 KB | Posted: 8/23/05
Here is the other side view.

class2.jpg
675 hits | 94.63 KB | Posted: 8/23/05
Here is a closer view on the bench.

driveroldnewdrop.jpg
713 hits | 75.97 KB | Posted: 8/29/05
here is a back side shot of the standard 4" drop mount and the skyjacker Class II 4 or 6" drop mount...

driveroldnewdrop2.jpg
903 hits | 87.71 KB | Posted: 8/29/05
Here is a front view of the standard 4" drop and the class II

oldnewdrop.jpg
809 hits | 72.01 KB | Posted: 8/29/05
here is a back side view of the driverside mount.

oldnewpass_helperchristain.jpg
845 hits | 110.97 KB | Posted: 8/29/05
Here is the pass side Class II drop mount next to the standard 4" drop mount and "Helper Christain"

passsidenew2.jpg
699 hits | 102.8 KB | Posted: 8/29/05
big difference in the Class II and the standard 4" drop mount.

setting the jack stand.jpg
896 hits | 103.35 KB | Posted: 8/29/05
this is what i do to hold the TTB as i did the swap. i put upward presure on the outside of the beam...

drop2.jpg
608 hits | 72.3 KB | Posted: 8/24/05
The stock mount needs to come out. there are 6 rivets that need to be removed.. i hate these revits....

drop.jpg
912 hits | 105.38 KB | Posted: 8/24/05
Here is the back of the pass side (on drivers side) 4" drop mount. It is in the stock pivot mount an...

removerevits.jpg
990 hits | 105.51 KB | Posted: 8/29/05
Removing the rivets. I hate rivets i had to cut the added weld on the 4" drop mount and then cut dri...

weldandrivets.jpg
770 hits | 106.51 KB | Posted: 8/29/05
it is fighting alot but it will loose. this is the 1/2 way point for the mount coming out.

oldpassside4drop.jpg
663 hits | 86.25 KB | Posted: 8/29/05
after drilling, cutting the heads off, and 2 hours of air chisling it finall gave up. this mount was...

oldpasssidedrop.jpg
848 hits | 94.38 KB | Posted: 8/29/05
it fought hard but i did win finally. I hate rivets...

helperjosh.jpg
642 hits | 99.22 KB | Posted: 8/29/05
this was the halfway mark and "Helper Josh" wanted to get a mug shot.

helperjosh2.jpg
815 hits | 90.8 KB | Posted: 8/29/05
anothe "Helper Josh" mug shot at the Halfway strech.

passdrop.jpg
973 hits | 89.3 KB | Posted: 8/29/05
extream close up of the pass side drop mount.

newbracketfromdriverside.jpg
660 hits | 93.65 KB | Posted: 8/29/05
here is a drivers side view of the new mounts in place.

passsidedrop.jpg
931 hits | 95.79 KB | Posted: 8/29/05
Here is a view fron the pass side wheel well.

driverswheel.jpg
799 hits | 94.82 KB | Posted: 8/29/05
Here is the result with the class II mount installed and it just set back under it own weight. it on...

passsidewheel.jpg
822 hits | 94.85 KB | Posted: 8/29/05
Pass side wheel after install.

dropsinstalled.jpg
1034 hits | 92.87 KB | Posted: 8/29/05
here is a front shot with both mounts in place. Time to do a Knuckle under to reduce the steering an...

no pigen toe.jpg
966 hits | 98.03 KB | Posted: 9/7/05
No more "Pigen Toe" it rides alot better. i still got to replace a tie rod and ball joint.