Motor2 as it came.jpg
519 hits | 127.71 KB | Posted: 10/31/06
This was how she looked when i opened the hood. i had a lifter tick and the PO bought new lifters so...

MOTOR7.jpg
500 hits | 121.36 KB | Posted: 10/31/06
i started by removing the bolts that held the compressor in place and the air cleaner and PCV and fr...

MOTOR6.jpg
513 hits | 120.13 KB | Posted: 10/31/06
i moved the compressor off to the side it is still connected and i was told it works (i found out it...

MOTOR5.jpg
512 hits | 131.46 KB | Posted: 10/31/06
Off came the fuel line from the pump to the carb then the valve cover and lifter valley cover.

MOTOR4.jpg
535 hits | 127.26 KB | Posted: 10/31/06
I did one cylinder at a time and replaced all the lifters and 2 slightly bent push rods.

MOTOR3.jpg
524 hits | 120.25 KB | Posted: 10/31/06
new lifter installed and all tourqued back down. i cleaned and painted the lifter cover.

MOTOR2.jpg
566 hits | 121 KB | Posted: 10/31/06
another shot of the painted lifter cover. as i was replacing the plugs i found a few bad wires so ou...

MOTOR.jpg
516 hits | 123.47 KB | Posted: 10/31/06
Here she was all toghther and ready to return to the smog shop. i decided to clean and paint the val...