00Boxes.JPG
747 hits | 66.04 KB | Posted: 8/23/12
KRL1003A (bottom)

01Sockets.JPG
707 hits | 96.74 KB | Posted: 8/23/12
Sockets, Extensions, Ratchets, Impacts, Torque sticks, Torque wrenches, Torx drivers

TO GET ACCURAT...

02Chemicals.JPG
580 hits | 87.32 KB | Posted: 8/23/12
Brushes, Grease (specialty), Needle files, Adhesives

03SpecialTools.JPG
620 hits | 82.24 KB | Posted: 8/23/12
Oil filter wrenches, Stethoscope, Trim tools, Specialty tools

04FilesCutting.JPG
619 hits | 86.71 KB | Posted: 8/23/12
Files, Saws, Snips, Chain wrenches, Clutch alignment

05Electronic.JPG
606 hits | 97.38 KB | Posted: 8/23/12
Electrical

06Pressure.JPG
561 hits | 82.11 KB | Posted: 8/23/12
Pressure/Vacuum

07Sprays.JPG
406 hits | 70.83 KB | Posted: 8/23/12
Chemicals, Dremel

08Screwdrivers.JPG
426 hits | 93.45 KB | Posted: 8/23/12
Screwdrivers, Bits

09WrenchesMM.JPG
445 hits | 89.27 KB | Posted: 8/23/12
Metric wrenches, Fan clutch, Belt, Square drive

10WrenchesIn.JPG
512 hits | 99.63 KB | Posted: 8/23/12
Inch Wrenches, Adjustable, Pipe, Distributor

11Hammers.JPG
542 hits | 92.59 KB | Posted: 8/23/12
Hammering, Scraping, Drifts, Die grinders, Bearing driver, Slide hammer

12DrillThread.JPG
635 hits | 81.62 KB | Posted: 8/23/12
Threading, Drilling, Extractors, Hole saws

13AC.JPG
406 hits | 74.04 KB | Posted: 8/23/12
A/C

14Bulk.JPG
429 hits | 91.37 KB | Posted: 8/23/12
Timing light, Bearing packer, oversize, spare parts

15Receipts.JPG
510 hits | 64.72 KB | Posted: 8/23/12
Markers, Overflow

16SmallTools.JPG
495 hits | 100.28 KB | Posted: 8/23/12
Picks, Scribes, Pickup, Inspection, BlowTips, Tires, Fuel disconnect, Radio removal, Pocket tools

17Coolant.JPG
466 hits | 86.32 KB | Posted: 8/23/12
Coolant, Hose, Freeze plug

18Pliers.JPG
494 hits | 87.44 KB | Posted: 8/23/12
Pliers

19HexTorx.JPG
388 hits | 88.78 KB | Posted: 8/23/12
Hex, Triple-square, & Spline

20Tubing.JPG
394 hits | 73.62 KB | Posted: 8/23/12
Tubing, Brakes, Fluid collection

21Scanners.JPG
406 hits | 67.7 KB | Posted: 8/23/12
Scanners, Hones, Gasket Punches

22Clipboards.JPG
415 hits | 65.27 KB | Posted: 8/23/12
Paperwork

23Junk.JPG
415 hits | 64.4 KB | Posted: 8/23/12
Soldering & Random

31Top.JPG
691 hits | 86.33 KB | Posted: 8/23/12
Overflow

Soldering gun (in box)
Battery load tester (same color red as the tool box)

32TransCaps.JPG
459 hits | 60.4 KB | Posted: 8/23/12
Transmission tailhousing caps

39Rivet.JPG
541 hits | 71.07 KB | Posted: 8/23/12
Rivets

40BushingViseGrips.JPG
608 hits | 81.26 KB | Posted: 8/23/12
Bearing drivers & ViseGrips

41Micrometers.JPG
603 hits | 83.4 KB | Posted: 8/23/12
Measuring

42PullersPress.JPG
629 hits | 84.72 KB | Posted: 8/23/12
Presses, pullers, & clamps

Trailer1.JPG
583 hits | 76.96 KB | Posted: 8/23/12

Warn1700.JPG
629 hits | 68 KB | Posted: 8/23/12
New winch motor for my 2-post.

See also:
[url=http://www.supermotors.net/registry/2742/33395-4][img...

Dril1Press.JPG
716 hits | 57.12 KB | Posted: 8/23/12
$300 CraigsList find - worth at least double.

GrinderPC8.JPG
781 hits | 72.92 KB | Posted: 8/23/12
This 8" variable-speed grinder wasn't as expensive as I expected, and seems to work perfectly....

GrinderSkil6.JPG
763 hits | 73.67 KB | Posted: 8/23/12
This cheapo grinder seems to be worth the $45 I paid, but I had to change both wheels, which cost an...

GrinderStane.JPG
1835 hits | 105.16 KB | Posted: 12/2/12
These grinders have been filling my work bench, and filling the area around it with shavings. Now I...

GrinderStanf.JPG
1042 hits | 40.26 KB | Posted: 12/6/12
I welded 3 small boxes together to give me enough room for wiring, and to position the outlets on th...

GrinderStang.JPG
1025 hits | 54.61 KB | Posted: 12/7/12
Other than the wheels, it's done. The GFCI protects everything, including the lamp, which now works...

GrinderStand.JPG
2110 hits | 81.49 KB | Posted: 1/3/13
I finally got around to putting the wheels on. They only touch the ground when it's tilted forward....

GrinderStank.JPG
1043 hits | 44.38 KB | Posted: 2/9/13
This shows that the grinders flip, and the closeup shows the locking pin & retaining bolt, which can...

Miller211SM.JPG
1217 hits | 63.21 KB | Posted: 12/5/12
These were about $1300 delivered from BRWeldingSupply on eBay. I'll also have to buy bottles, and s...

Bottles.JPG
659 hits | 76.73 KB | Posted: 12/5/12
These were about $350 from the local NexAir.

WeldCart2.JPG
702 hits | 62.77 KB | Posted: 12/7/12
I've had these precut angle iron braces lying around for years, and now they're getting used. I thi...

WeldCart.JPG
2439 hits | 47.76 KB | Posted: 12/8/12
This is mostly old material that has been lying around for years, covered in Rustoleum Sail Blue (77...

Miller211FrontSw.JPG
1573 hits | 92.63 KB | Posted: 12/8/12
Power Switch Relocation
IF THE IMAGE IS TOO SMALL, click it.

The rear power switch was driving m...

Miller211Label.JPG
1264 hits | 88.03 KB | Posted: 12/13/12
The labels almost make it look factory. They're from a [url=http://www.amazon.com/Brother-PC-Connec...

WingNut.JPG
727 hits | 48.3 KB | Posted: 3/6/13
I don't understand why Miller did half the crap they did on this machine, but the nylock nut here wa...

Gloves.JPG
818 hits | 50.57 KB | Posted: 3/6/13
These gloves are really poorly sewn - the thread isn't heat-resistant; the stitching isn't rip-stop;...

WeldCart19.jpg
119 hits | 86.59 KB | Posted: 8/18/19
In addition to the welder, spool gun, bottles, hoods, gloves, tips, & spools, the cart also carries ...

ViseMount.JPG
1187 hits | 128.74 KB | Posted: 4/20/14
I don't know why I didn't think of this before, but the 2nd square tube will allow the vise to mount...

Vises02.JPG
634 hits | 135.04 KB | Posted: 4/20/14
Out with the old (CRAP); in with the new! This [url=https://www.amazon.com/dp/B001VXW490/]Ridgid F-...

HusqyClutci.JPG
380 hits | 137.51 KB | Posted: 10/17/14
Husqvarna riding mower clutch & PTO switch

Husqy.JPG
425 hits | 166.16 KB | Posted: 12/10/14
Husqy 435
It's tiny, but it's doing everything I need so far.

SnowMox.jpg
314 hits | 94.68 KB | Posted: 3/12/15
Amazing what you can find at the local salvage warehouse.

Too bad this is the day AFTER the last sn...

Scale10K.jpg
362 hits | 61.44 KB | Posted: 7/17/15
10,000# Load Cell Hanging Scale

~$265 on eBay UN-calibrated

BlairFBmill.jpg
204 hits | 87.8 KB | Posted: 7/19/17
NOT MINE (dammit)

This was auctioned locally with BSOD. The buyer re-seated one of the boards in t...

BoschHmrDrl.jpg
105 hits | 98.76 KB | Posted: 8/26/21
Bosch Bulldog SDS+Max hammer drill & accessories