Test Burnout with the Funnelweb and 4.86's.MOV
2082 hits | 4.45 MB | Posted: 3/4/05
Test burnout with the Funnelweb, 4.86's, and Holley 750HP. Haven't put the port stuffers in yet.

White Truck Launch on Cement.avi
925 hits | 3.93 MB | Posted: 12/10/04
Trying to get the Cal-tracs adjusted. Haven't had a chance to tune them yet with the 4.86's.

White Truck Burnout on Cement Pad.avi
758 hits | 3.87 MB | Posted: 12/10/04
A short test burnout after a cam install. Tuning was way off and still had the Flowmaster 40 series...

White Truck Practice Launch on a Local Highway.avi
762 hits | 3.95 MB | Posted: 12/10/04
A short practice launch after installing the Cal-tracs. The 4.86's and slicks were installed a week...

White Truck Practice Launch on a Local Highway.MOV
740 hits | 3.08 MB | Posted: 1/25/05
Same video as the short launch on highway, but better quality in QuickTime.

Launch with Port Stuffers, Funnelweb, and 4.86.MOV
911 hits | 1.93 MB | Posted: 4/3/05
First launch with the port stuffers installed, Funnelweb, and 4.86 gears. Traction is definetaly a ...

Burnout with the Port Stuffers, Funnelweb, and.MOV
847 hits | 4.02 MB | Posted: 4/3/05
Here is a video with the Parker port stuffers and Funnelweb installed with the 4.86 gears.

White Truck idling with open headers.MOV
927 hits | 2.39 MB | Posted: 4/3/05
Short clip of the truck idling.

White Truck on Highway.MOV
690 hits | 3.95 MB | Posted: 6/1/05
A short clip of the truck launching on the highway. This is with the Funnelweb, Port Stuffers, 4.86...

First test launch with the Borla's.MOV
778 hits | 7.35 MB | Posted: 7/17/05
Here is a light acceleration with the Borla's. Had to see what they sound like after I put them on....

White Trucks first experience on the burnout p.MOV
910 hits | 14.62 MB | Posted: 7/20/05
Here is a video of my truck strapped to our burnout pad. I haven't put this truck on the pad yet so...

Dyno pull #3.MOV
2087 hits | 11.01 MB | Posted: 8/22/05
A video of my truck on the dyno.

329.1 RWHP dyno run.MOV
2238 hits | 13.89 MB | Posted: 8/23/05
Here is a dyno run on a dyno jet with me driving. It made 329.1 RWHP @ 6500 rpms and 299 ft lbs @ 5...

Launch on highway with slicks and new front sp.MOV
2681 hits | 2.98 MB | Posted: 11/4/05
Here is a launch of my truck with the new Eibach front suspension and the M/T ET Street Radials.

Launch with X pipe custom JPT converter and street tires.mov
906 hits | 2.37 MB | Posted: 11/30/05
Here is a launch of my truck with the newly installed X-pipe, custom 4200 rpm JPT converter, and on...

Leaving off idle with 31 35 shooters.avi
1161 hits | 4.31 MB | Posted: 8/23/06

Auto Fest Dyno Pull 2.wmv
863 hits | 948.97 KB | Posted: 9/6/06
Truck made 336 RWHP @ 6800-7000 rpm and 359 RWTQ @ 4500 rpm. Jetting was really lean, went to 14.5:1...

White truck pullin on 3 gears with Spin Techs.wmv
982 hits | 1.12 MB | Posted: 6/2/07
First decent video of the 408 in action. The smoke is extra fuel from the dual 50cc accelerator pum...

2007 Auto Fest Dyno Pull.wmv
2336 hits | 3.44 MB | Posted: 6/24/07
The 408 made 376 rwhp @ 6600 and 466 rwtq @ 4000 rpms.

Leaving without transbrake and spinning.wmv
734 hits | 17.34 MB | Posted: 10/21/07
Leaving from about 3000 rpms on the foot brake. Still had terrible bounce. Ran a 8.029 @ 89.85 mp...

Transbrake launch with terrible bounce.wmv
994 hits | 20.37 MB | Posted: 10/21/07
Should've left parts on the track on this pass. Looks like the rear end drops down a foot and the l...

7.976 pass and still let off on launch.wmv
669 hits | 14.71 MB | Posted: 10/21/07
This was the quickest ET pass. Ran a 1.881 60', 7.976 @ 89.90 mph. Foot brake to about 3500, 2 tur...

1st pass at GCR.AVI
768 hits | 14.02 MB | Posted: 10/21/07
1st ever pass down the track. Ran a 1.832 60', 8.149@88.80 mph. Bounced bad.

8.025 @ 89.99 mph pass spinning off of transbrake.AVI
602 hits | 18.17 MB | Posted: 2/12/08
Launched off of the transbrake and the truck actually spun instead of hook and bounce, so I stayed i...

065.MOV
591 hits | 32.14 MB | Posted: 5/6/08
Here is the 7000 rpm pull we made with the 408 Cleveland. The numbers on the screen are un corrected...

061.MOV
872 hits | 33.41 MB | Posted: 5/6/08
Here is a video of my 408 Cleveland with CHI 225cc 3v's and a solid roller on pump gas making 675 hp...

408idle.avi
525 hits | 368.79 KB | Posted: 5/6/08
This video was taken with my cell phone. The camera must've had a sound buffer on it, so it distorte...

408 idle with open headers in truck.wmv
439 hits | 23.41 MB | Posted: 6/9/08
408 idle with open headers in truck

408 Open Header Idle in Truck.wmv
602 hits | 6.59 MB | Posted: 6/9/08
Video of the first fire up of the 408 after the dyno runs. Open 3.5" collectors with no mufflers.

CHI Headed 408 Idle with mufflers.wmv
886 hits | 3.24 MB | Posted: 6/25/08
3 1/2 exhaust with Dynatech mufflers and turndowns.

CHI headed 408 launch.avi
469 hits | 9.4 MB | Posted: 8/26/08
Test launch with the new CHI headed 408, ladder bar rear suspension, full roller c6, Strange double ...

7.34@95.16 mph pass - Run 7.avi
492 hits | 9.42 MB | Posted: 9/5/08
On this pass, the truck cut a 1.655 60' and ended up running a 7.34 @ 95.16 mph.

7.357@95.08 mph pass - Run 5.avi
538 hits | 17.92 MB | Posted: 9/5/08
Racing a full on drag Camaro here. I ran a 7.357@95.08 and he ran a 7.293@95.65 mph. This was my f...

Launch on slicks at Thunder Valley.wmv
620 hits | 29.04 MB | Posted: 9/14/08
Video of my truck launching at Thunder Valley on full slicks. It was a street legal grudge night, s...

Dustin Pinks style drag race.wmv
558 hits | 38.06 MB | Posted: 9/14/08
Tree wasn't working, so while they were doing that, they had us racing Pinks style.

White truck pass at Cedar Falls, IA.wmv
686 hits | 13.09 MB | Posted: 10/5/08
Truck ran an 11.2 @ 118.89 on this pass. Ended up with a best of 10.96@120.22, but didn't get that ...

Valve body started having really delayed shifts.wmv
488 hits | 13.68 MB | Posted: 10/26/08
The valve body decided to not shift on time. So it made it sound like I couldn't drive!!!

408 on Applied's Dyno.wmv
822 hits | 26.31 MB | Posted: 1/12/09
Engine made 715hp @ 6900 and 604 ft lbs @ 5200 rpms. Held over 700 hp from 6500-7200. Still a pump...

P1010548.MOV
574 hits | 94.43 MB | Posted: 10/4/09
A walk around of my truck as it sits before the last two races of the season. The mic on the camera...

P1010549.MOV
1383 hits | 15.18 MB | Posted: 10/4/09
Testing the true stall speed of the 9.5" Art Carr convertor

P1010663.MOV
839 hits | 38.38 MB | Posted: 11/17/09
Put the truck on a chassis dyno but the inductive pickup wouldn't read any spark. So, we couldn't r...