1pcm_plug_location.jpg
686 hits | 43.03 KB | Posted: 12/20/05
Location of PCM plug on firewall below power brake booster.

2pcm_unplugged.jpg
425 hits | 37.15 KB | Posted: 12/20/05
The PCM socket unplugged

3pcmslide.jpg
326 hits | 35.24 KB | Posted: 12/20/05
simply pull the PCM out once you get the bezels unbolted.

4pcmremoved.jpg
468 hits | 39.14 KB | Posted: 12/20/05
The PCM removed from the truck

5endcap_removed.jpg
426 hits | 33.73 KB | Posted: 12/20/05
This cover is hiding the contact surface that you're looking for.

a1contacts.jpg
356 hits | 32.95 KB | Posted: 12/20/05
These are the contacts that you'll need to install your chip

a2pcm_pieces.jpg
352 hits | 44.94 KB | Posted: 12/20/05
To clean the contacts you need to dissassemble the PCM so you can access the board easily on both si...

a3socket_inside.jpg
403 hits | 41.79 KB | Posted: 12/20/05
A shot of the socket w/ the lid of the case removed.

a4.jpg
413 hits | 39.5 KB | Posted: 12/20/05
This is the chip.

a5kickpanel.jpg
432 hits | 43.82 KB | Posted: 12/20/05
You can access the rear of the PCM where the chip installs from the driver's side kick panel however...