DSCF0031.JPG
597 hits | 59.52 KB | Posted: 4/17/09
Ouch ! Minor fender bender from a family member(gotta be fixed for no cost)

DSCF0033.JPG
605 hits | 28.85 KB | Posted: 4/17/09
Scored a "free" filler panel from a local yard. Thanks to my Mopar buddy's connection at the yard we...

DSCF0041.JPG
528 hits | 45.49 KB | Posted: 4/17/09
Clean it up. just have to remove the remaining clear coat and get it ready for color match.

IMG_0359.JPG
494 hits | 25.23 KB | Posted: 4/27/09
Change of plans. Steamngn, from Lincolnsonline, came through for me in a big way with this 90' fille...

IMG_0358.JPG
589 hits | 18.63 KB | Posted: 4/27/09
Washed it, buffed it to get rid of tiny, minor scuffs with Turtle wax polishing compound and then wa...

IMG_0364.JPG
491 hits | 49.56 KB | Posted: 4/27/09
Time to change the parts. The used replacement sits under the hood.

IMG_0363.JPG
520 hits | 41.65 KB | Posted: 4/27/09
These two 11mm nuts are the first to come off.

IMG_0354.JPG
500 hits | 52.91 KB | Posted: 4/27/09
Then the only other fastener is the philips screw down the black strip at the rear, level with the L...

IMG_0367.JPG
523 hits | 56.68 KB | Posted: 4/27/09
Once you pull the whole assembly out, just twist out the two bulb holders and it comes free.

IMG_0368.JPG
833 hits | 53.28 KB | Posted: 4/27/09
These are the two poppers I need to get out.

IMG_0371.JPG
824 hits | 39.3 KB | Posted: 4/27/09
Removing the body side bumper trim from the driver's front wheelwell is just two philips screws.

IMG_0373.JPG
862 hits | 45.65 KB | Posted: 4/27/09
Now you can pull the side body bumper trim back and wedge a large screwdriver in, to allow enough ac...

IMG_0379.JPG
802 hits | 53.08 KB | Posted: 4/27/09
The three philips screws that hold this new (used) piece on are only accessible from underneath.

IMG_0374.JPG
859 hits | 59.08 KB | Posted: 4/27/09
Two of the screws are accessed reasonably easily. This screw would have required the removal of the ...

IMG_0381.JPG
785 hits | 50.9 KB | Posted: 4/27/09
Like it never happened !