IMG_0177.JPG
605 hits | 64.57 KB | Posted: 4/29/06
Tapped steeing box, rebuilt, ready for hydro.
IMG_0180.JPG
496 hits | 59.03 KB | Posted: 4/29/06
PCS hydraulic ram. 8 x 1.5"
IMG_0206.JPG
470 hits | 83.62 KB | Posted: 4/29/06
Power Steering cooler. Black metal is 1/8" cold rolled steel, fabbed into a mount by me.
IMG_0209.JPG
471 hits | 71.47 KB | Posted: 4/29/06
8.5x7.5" single core aluminum radiator.
IMG_0205.JPG
522 hits | 56.45 KB | Posted: 4/29/06
Hydraulic cylinder installed w/ tabs welded on. Perty red, ain't it? Steering with this is incredibl...
IMG_0232.JPG
464 hits | 71.32 KB | Posted: 4/29/06
This is the PS fluid cooler. It is mounted perpendicular to the engine water radiator on the radiato...
IMG_0236.JPG
565 hits | 31.1 KB | Posted: 4/29/06
The new PS filter. $17.99 from Autozone.
It shouldnt restrict the flow, and holds more fluid to he...
IMG_0178.JPG
488 hits | 54.67 KB | Posted: 4/29/06
Saginaw pump off an 87 E-series van.
I didnt use this yet due to bracket complications- I need som...
IMG_0239.JPG
520 hits | 60.4 KB | Posted: 4/29/06
Hydro-assist hoses. -06 hose & fittings, equivilent to roughly .25" ID
IMG_0126.JPG
622 hits | 92.83 KB | Posted: 4/29/06
Rebuilt 7.3.
PS / AC / VAC bracket, turbo, and filter box are not installed.
IMG_0204.JPG
649 hits | 75.2 KB | Posted: 4/29/06
Holley Red Label electric fuel pump.
97 gph @ 7 psi...
IMG_0210.JPG
584 hits | 59.86 KB | Posted: 4/29/06
Holley red pump mounted.
2WD Tailhousing.jpg
602 hits | 68.29 KB | Posted: 4/29/06
2WD tailhousing / output shaft for a S5-47 ZF-5spd.
Div. NP205.jpg
670 hits | 62.15 KB | Posted: 4/29/06
Divorced NP-205. Will be twin sticked, home fabbed stuff.
Bought this from a shop in OKC. Forgot th...
NP205 119.jpg
584 hits | 53.7 KB | Posted: 5/1/06
The internals of the venerated NP205. Center drive gears not shown. And yes, I realize the picture i...
NP205 123.jpg
572 hits | 68.94 KB | Posted: 5/1/06
Used a sprinkler head stem core to hold the needle bearings in place while I reinstalled them. It wa...
NP205 122.jpg
688 hits | 79.63 KB | Posted: 5/1/06
Gutted NP205. Center drive gears and shifter forks still installed.
ZF Insides.jpg
2781 hits | 78.03 KB | Posted: 5/6/06
ZF S5-42 insides.
Rob Transmission 02.jpg
2358 hits | 85.57 KB | Posted: 7/14/06
ZF S5-42 main housing. I thought it was going to be heavier.
ZF reassembled 01.JPG
960 hits | 72.31 KB | Posted: 7/15/06
ZF S5-42 4x4 converted to 2wd during its rebuild. Dissassembled and reassembled by yours truely (but...
205 Mount 003.jpg
1425 hits | 71.36 KB | Posted: 7/28/06
I'm not going to use this, it will hang way too low, and snag on every rock/obstacle.
The new one ...
D6010.25004.jpg
622 hits | 55.74 KB | Posted: 8/15/07
Broken DPS Headstud. Rated for something crazy, made out of H-13 tool steel... right. Still don't kn...
D6010.25005.jpg
717 hits | 54.21 KB | Posted: 8/15/07
Close up...$675 for the entire set. F'in A.
This pisses me off.
Driveshafts.JPG
582 hits | 61.59 KB | Posted: 5/25/08
Far left is a 1350 6" slip yoke for 3"x 0.120 wall DOM for my intermediate shaft
Next to it is the y...