DSCN0240.jpg
346 hits | 77.29 KB | Posted: 3/2/08

DSCN0239.jpg
354 hits | 77.27 KB | Posted: 3/2/08
The Bronco has no recovery hooks, so I am adding two of these up front $6.50 each!

DSC00586.JPG
432 hits | 65.92 KB | Posted: 1/17/08
The old radio is gone...

DSC00583.JPG
403 hits | 70.13 KB | Posted: 1/17/08
A little peek inside, still clean!

DSC00580.JPG
395 hits | 81.41 KB | Posted: 1/17/08

DSC00578.JPG
422 hits | 82.54 KB | Posted: 1/17/08

DSC00576.JPG
442 hits | 84.4 KB | Posted: 1/17/08

DSC00550.JPG
539 hits | 50.5 KB | Posted: 8/11/07
I picked this up at Ratshack,(under $2.00) I did not know what the rating on the original part was so I selected one that would blow before a fire would start yet stand up to the heat of soldering it in. you can see the temp rating in the pic.

DSC00557.JPG
568 hits | 71.51 KB | Posted: 8/11/07
I secured every thing with ty-wraps and had a beer............or two.

If you don't feel comfortable (or know what your doing) working with electricity don't do this. Go buy the new part.

I just get a kick out of making something dead, live agai...

DSC00438.JPG
1212 hits | 101.83 KB | Posted: 2/24/06
Roof Rack 002

DSC00555.JPG
937 hits | 60.43 KB | Posted: 8/11/07
The plug was toasted so I cut it off and used push on quick connects. Plugged it all in and tested . Now I have all my fan speeds!

DSC00545.JPG
791 hits | 55.31 KB | Posted: 8/10/07
Tired old resistor pack, only worked on high speed fan I have added a wire to replace a broken connector.

DSC00557.JPG
568 hits | 71.51 KB | Posted: 8/11/07
I secured every thing with ty-wraps and had a beer............or two.

If you don't feel comfortable (or know what your doing) working with electricity don't do this. Go buy the new part.

I just get a kick out of making something dead, live agai...

DSC00546.JPG
540 hits | 48.23 KB | Posted: 8/11/07
I found the thermal fuse was blown too. Thats the gold looking cylinder with the pointed end. You can check it with a meter.

DSC00550.JPG
539 hits | 50.5 KB | Posted: 8/11/07
I picked this up at Ratshack,(under $2.00) I did not know what the rating on the original part was so I selected one that would blow before a fire would start yet stand up to the heat of soldering it in. you can see the temp rating in the pic.

DSC00440.JPG
535 hits | 57.39 KB | Posted: 2/24/06
Roof Rack 004
Is this a stock roof rack?...you tell me.

DSC00551.JPG
510 hits | 57.15 KB | Posted: 8/11/07
There was an un used crimp location next to the original part, I clip the old part off, stuck in the new and crimped it with pliers.

DSC00439.JPG
508 hits | 62.64 KB | Posted: 2/24/06
Roof Rack 003