|
|
'98 CV/MGM Radiator Grille Removal
1. Remove the radiator upper sight shield (8C291).
2. Remove the five nuts retaining the radiator grille (8200) to the grille opening panel.
3. Disengage the retaining clips by pulling forward on the lower edge of the radiator grille.
Installation
1. Position the studs to the radiator grille opening panel (8190).
2. Push in the bottom of the radiator grille until the clips are fully seated.
3. Tighten the nuts to 7-9 Nm (62-79 lb-in).
Item Part Number Description
1 8190 Radiator Grille Opening Panel
2 N621906-S301 Nut (5 Req'd)
3 - Stud
4 8200 Radiator Grille
5 - Clip
A - 7-9 Nm (62-79 Lb-In)
|
