Ducklodge > 1993 Ford Bronco > open folder Tcase Skid > img_20141122_024208.jpg

File 8 of 13
Prev | Next

Share This
Url
Tag
Img
Thumb

img_20141122_024208.jpg This would be the top. I used some 1/8" angle to brace the flat part some. I cutthe top of the angle after welding down the long part then bent it down and finished welding it. I then turned the wire feed way up and filled in the cut gap. I also cut about a 2" drain hole. I used 11 pieces of steel to make this.
img_20141122_024208.jpg | Hits: 219 | Posted on: 11/22/14 | View original size (125.93 KB)

This would be the top. I used some 1/8" angle to brace the flat part some. I cutthe top of the angle after welding down the long part then bent it down and finished welding it. I then turned the wire feed way up and filled in the cut gap. I also cut about a 2" drain hole. I used 11 pieces of steel to make this.