|
|
the outlet finished going to the engine.
because of my aftermarket mustang style intake, this is how i needed to run my intake. my MAF sensor i have pointed downwards in order the the connector to reach.
i used a 3inch sewer (3034,not sch40) 90* elbow along with a 4x3.5 Spectre coupling to go from the housing to the elbow, then a 3.5 coupling to go to my Pro-M bullet unflanged 75mm MAF sensor. i used some assorted 3inch Spectre piping to connect to the 75mm throttle body
|
