|
|
I replaced my old Superlift radius arms for a set of Procomp radius arms. The tire use to rub very bad on the bottom edge of the Superlift arms and limited my turning, the shock mount was angled abit off causing the bushings to wear, the radius arm bushing was never quite even on the bracket and would squeak alot as suspension moved.
I choose ProComp because i already had a spare laying around so i only needed to order the other side. I had them on my previous truck and worked great and allowed for much better turning. the length was the same so the radius arm bracket stayed in same place. The bottom edge was angled better preventing rubbing, the shock mount was correct, the radius arm bushing sat correctly. and most important it turns much sharper
I replaced the Deaver coil springs with a pair of ProComp springs. The Deavers were great for offroad but were too soft for onroad for high speeds. Even with stiff shocks, the front of the truck would raise significantly when accelerating. The Procomp has a stiffer spring rate without being too stiff. sacrificing offroad ride quality for onroad ride quality because how little i offroad anymore.
I added 1.5" wheel spacers. i thought it would help allow tighter turning but with the new radius arms i think i may take them back off. they seem to be affecting my camber greatly despite the new stiffer coil springs
|
