|
|
20200315_205904.jpg | Hits: 111 | Posted on: 3/15/20
| View Low-Res
Turns out the battery hold-down had been replaced with a threaded rod with the wrong thread pitch, so I had to unjam it & chase the threads. The tray was also bent, and both battery terminals had to be cleaned & straightened. The positive nut was rounded. I soldered a new 8ga GXL black wire to the hacked harness grounds, and crimped new rings on. It's long enough to connect more-originally, next time the battery terminals need replacing. But I polished the unusual lead terminal in the negative cable so it's well-grounded now.
IF THE IMAGE IS TOO SMALL, click it.
|
