|
|
dsc01810.jpg | Hits: 944 | Posted on: 2/25/06
| View Low-Res
After placing the mat use a brush to apply the resin. You can apply 2 hands of resin and 2 layers of fiberglass and after that let it dry. Be careful with air bubbles trapped in the resin because they weaken the fiber and can appear as holes when you sand the part. Once it is dry you will need to sand it with a grid 120 sand paper before applying a second layer of fiberglass and resin. I used many layers of thin fiber because using heavier mat you get a rough surface that will require more filling and sanding to be finished
|
