|
|
alternator-harness-removal.jpg | Hits: 670 | Posted on: 11/21/06
| View original size (2.35 MB)
Step 7:
With the Alternator bracket unbolted, you now have easier access to the alternator wiring. Remove the 10mm nut and remove the wire. Replace the nut. With a VERY small screwdriver, insert it down into the other 2 harnesses located under the alternator bracket. Gently pry back on the locking clip and pull harness assemblies loose. remove all 3 harnesses and tuck them back out of the way. YOU MAY NOW CAREFULLY REMOVE THE SPARK PLUG WIRE ASSEMBLY AND SET ASIDE.
|
